ath79: add support for TP-Link CPE510 v1
authorAdrian Schmutzler <freifunk@adrianschmutzler.de>
Sat, 20 Jul 2019 10:49:20 +0000 (12:49 +0200)
committerDavid Bauer <mail@david-bauer.net>
Wed, 7 Aug 2019 16:04:03 +0000 (18:04 +0200)
commit0104eed1e5ca93a1c912e2d9b70e800b8d3099ad
tree46f7172dfc36316615adf97854c13cc7646d6f29
parent08857e69becc214336ba073bca6f626bfaa67781
ath79: add support for TP-Link CPE510 v1

TP-Link CPE510-v1 is an outdoor wireless CPE for 5 GHz with
two Ethernet ports based on Atheros AR9334

Specifications:
 - 560/450/225 MHz (CPU/DDR/AHB)
 - 2x 10/100 Mbps Ethernet, 1x PoE-in, 1x PoE-out
 - 64 MB of DDR2 RAM
 - 8 MB of SPI-NOR Flash
 - 2T2R 5 GHz
 - 13 dBi built-in antenna
 - Power, LAN0, LAN1 green LEDs
 - 4x green RSSI LEDs

Flash factory image through stock firmware WEB UI
or through TFTP:
To get to TFTP recovery just hold reset button while powering on for
around 4-5 seconds and release.
Rename factory image to recovery.bin
Stock TFTP server IP:192.168.0.100
Stock device TFTP address:192.168.0.254

Based on the work of Paul Wassi <p.wassi@gmx.at>

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
target/linux/ath79/base-files/etc/board.d/01_leds
target/linux/ath79/base-files/etc/board.d/02_network
target/linux/ath79/base-files/etc/board.d/03_gpio_switches
target/linux/ath79/dts/ar9344_tplink_cpe510-v1.dts [new file with mode: 0644]
target/linux/ath79/image/generic-tp-link.mk