git.openwrt.org Git - openwrt/staging/rmilecki.git/blob

   1 From 36b8af12f424e7a7f60a935c60a0fd4aa0822378 Mon Sep 17 00:00:00 2001
   2 From: Ansuel Smith <ansuelsmth@gmail.com>
   3 Date: Mon, 22 Nov 2021 16:23:43 +0100
   4 Subject: net: dsa: qca8k: move regmap init in probe and set it mandatory
   5
   6 In preparation for regmap conversion, move regmap init in the probe
   7 function and make it mandatory as any read/write/rmw operation will be
   8 converted to regmap API.
   9
  10 Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
  11 Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
  12 Signed-off-by: David S. Miller <davem@davemloft.net>
  13 ---
  14  drivers/net/dsa/qca8k.c | 14 ++++++++------
  15  1 file changed, 8 insertions(+), 6 deletions(-)
  16
  17 --- a/drivers/net/dsa/qca8k.c
  18 +++ b/drivers/net/dsa/qca8k.c
  19 @@ -1086,12 +1086,6 @@ qca8k_setup(struct dsa_switch *ds)
  20         if (ret)
  21                 return ret;
  22
  23 -       /* Start by setting up the register mapping */
  24 -       priv->regmap = devm_regmap_init(ds->dev, NULL, priv,
  25 -                                       &qca8k_regmap_config);
  26 -       if (IS_ERR(priv->regmap))
  27 -               dev_warn(priv->dev, "regmap initialization failed");
  28 -
  29         ret = qca8k_setup_mdio_bus(priv);
  30         if (ret)
  31                 return ret;
  32 @@ -2077,6 +2071,14 @@ qca8k_sw_probe(struct mdio_device *mdiod
  33                 gpiod_set_value_cansleep(priv->reset_gpio, 0);
  34         }
  35
  36 +       /* Start by setting up the register mapping */
  37 +       priv->regmap = devm_regmap_init(&mdiodev->dev, NULL, priv,
  38 +                                       &qca8k_regmap_config);
  39 +       if (IS_ERR(priv->regmap)) {
  40 +               dev_err(priv->dev, "regmap initialization failed");
  41 +               return PTR_ERR(priv->regmap);
  42 +       }
  43 +
  44         /* Check the detected switch id */
  45         ret = qca8k_read_switch_id(priv);
  46         if (ret)