projects / openwrt / staging / blogic.git / blob
? search:


ef614a4eeea1befa1fb1f962d0dbf1c4da1bc87b
[openwrt/staging/blogic.git] /
1 From 2683773c8d2092083bafbc64fe7e6a25c48b8f5f Mon Sep 17 00:00:00 2001
2 From: Phil Elwell <pelwell@users.noreply.github.com>
3 Date: Fri, 5 Jul 2019 14:49:22 +0100
4 Subject: [PATCH 701/703] overlays: Rename pi3- overlays to be less
5 model-specific (#3052)
6
7 Rename the various pi3- overlays to be more generic, listing
8 the devices they apply to in the README. The original names are
9 retained for backwards compatibility as files that just include
10 the new versions - the README marks them as being deprecated.
11
12 See: https://github.com/raspberrypi/firmware/issues/1174
13
14 Signed-off-by: Phil Elwell <phil@raspberrypi.org>
15 ---
16 arch/arm/boot/dts/overlays/Makefile | 4 +
17 arch/arm/boot/dts/overlays/README | 97 ++++++++++++-------
18 .../arm/boot/dts/overlays/act-led-overlay.dts | 27 ++++++
19 .../boot/dts/overlays/disable-bt-overlay.dts | 55 +++++++++++
20 .../dts/overlays/disable-wifi-overlay.dts | 20 ++++
21 .../boot/dts/overlays/miniuart-bt-overlay.dts | 74 ++++++++++++++
22 .../boot/dts/overlays/pi3-act-led-overlay.dts | 28 +-----
23 .../dts/overlays/pi3-disable-bt-overlay.dts | 56 +----------
24 .../dts/overlays/pi3-disable-wifi-overlay.dts | 21 +---
25 .../dts/overlays/pi3-miniuart-bt-overlay.dts | 75 +-------------
26 10 files changed, 246 insertions(+), 211 deletions(-)
27 create mode 100644 arch/arm/boot/dts/overlays/act-led-overlay.dts
28 create mode 100644 arch/arm/boot/dts/overlays/disable-bt-overlay.dts
29 create mode 100644 arch/arm/boot/dts/overlays/disable-wifi-overlay.dts
30 create mode 100644 arch/arm/boot/dts/overlays/miniuart-bt-overlay.dts
31
32 --- a/arch/arm/boot/dts/overlays/Makefile
33 +++ b/arch/arm/boot/dts/overlays/Makefile
34 @@ -1,6 +1,7 @@
35 # Overlays for the Raspberry Pi platform
36
37 dtbo-$(CONFIG_ARCH_BCM2835) += \
38 + act-led.dtbo \
39 adau1977-adc.dtbo \
40 adau7002-simple.dtbo \
41 ads1015.dtbo \
42 @@ -26,6 +27,8 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \
43 dht11.dtbo \
44 dionaudio-loco.dtbo \
45 dionaudio-loco-v2.dtbo \
46 + disable-bt.dtbo \
47 + disable-wifi.dtbo \
48 dpi18.dtbo \
49 dpi24.dtbo \
50 draws.dtbo \
51 @@ -91,6 +94,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \
52 media-center.dtbo \
53 midi-uart0.dtbo \
54 midi-uart1.dtbo \
55 + miniuart-bt.dtbo \
56 mmc.dtbo \
57 mpu6050.dtbo \
58 mz61581.dtbo \
59 --- a/arch/arm/boot/dts/overlays/README
60 +++ b/arch/arm/boot/dts/overlays/README
61 @@ -180,14 +180,16 @@ Params:
62
63 act_led_activelow Set to "on" to invert the sense of the LED
64 (default "off")
65 - N.B. For Pi3 see pi3-act-led overlay.
66 + N.B. For Pi 3B, 3B+, 3A+ and 4B, use the act-led
67 + overlay.
68
69 act_led_gpio Set which GPIO to use for the activity LED
70 (in case you want to connect it to an external
71 device)
72 (default "16" on a non-Plus board, "47" on a
73 Plus or Pi 2)
74 - N.B. For Pi3 see pi3-act-led overlay.
75 + N.B. For Pi 3B, 3B+, 3A+ and 4B, use the act-led
76 + overlay.
77
78 pwr_led_trigger
79 pwr_led_activelow
80 @@ -205,6 +207,23 @@ Params:
81 and the other i2c baudrate parameters.
82
83
84 +Name: act-led
85 +Info: Pi 3B, 3B+, 3A+ and 4B use a GPIO expander to drive the LEDs which can
86 + only be accessed from the VPU. There is a special driver for this with a
87 + separate DT node, which has the unfortunate consequence of breaking the
88 + act_led_gpio and act_led_activelow dtparams.
89 + This overlay changes the GPIO controller back to the standard one and
90 + restores the dtparams.
91 +Load: dtoverlay=act-led,<param>=<val>
92 +Params: activelow Set to "on" to invert the sense of the LED
93 + (default "off")
94 +
95 + gpio Set which GPIO to use for the activity LED
96 + (in case you want to connect it to an external
97 + device)
98 + REQUIRED
99 +
100 +
101 Name: adau1977-adc
102 Info: Overlay for activation of ADAU1977 ADC codec over I2C for control
103 and I2S for data.
104 @@ -509,6 +528,21 @@ Params: 24db_digital_gain Allow ga
105 that does not result in clipping/distortion!)
106
107
108 +Name: disable-bt
109 +Info: Disable onboard Bluetooth on Pi 3B, 3B+, 3A+, 4B and Zero W, restoring
110 + UART0/ttyAMA0 over GPIOs 14 & 15.
111 + N.B. To disable the systemd service that initialises the modem so it
112 + doesn't use the UART, use 'sudo systemctl disable hciuart'.
113 +Load: dtoverlay=disable-bt
114 +Params: <None>
115 +
116 +
117 +Name: disable-wifi
118 +Info: Disable onboard WiFi on Pi 3B, 3B+, 3A+, 4B and Zero W.
119 +Load: dtoverlay=disable-wifi
120 +Params: <None>
121 +
122 +
123 Name: dpi18
124 Info: Overlay for a generic 18-bit DPI display
125 This uses GPIOs 0-21 (so no I2C, uart etc.), and activates the output
126 @@ -1447,6 +1481,20 @@ Load: dtoverlay=midi-uart1
127 Params: <None>
128
129
130 +Name: miniuart-bt
131 +Info: Switch the onboard Bluetooth function on Pi 3B, 3B+, 3A+, 4B and Zero W
132 + to use the mini-UART (ttyS0) and restore UART0/ttyAMA0 over GPIOs 14 &
133 + 15. Note that this may reduce the maximum usable baudrate.
134 + N.B. It is also necessary to edit /lib/systemd/system/hciuart.service
135 + and replace ttyAMA0 with ttyS0, unless using Raspbian or another
136 + distribution with udev rules that create /dev/serial0 and /dev/serial1,
137 + in which case use /dev/serial1 instead because it will always be
138 + correct. Furthermore, you must also set core_freq and core_freq_min to
139 + the same value in config.txt or the miniuart will not work.
140 +Load: dtoverlay=miniuart-bt
141 +Params: <None>
142 +
143 +
144 Name: mmc
145 Info: Selects the bcm2835-mmc SD/MMC driver, optionally with overclock
146 Load: dtoverlay=mmc,<param>=<val>
147 @@ -1509,48 +1557,27 @@ Params: panel Display
148
149
150 Name: pi3-act-led
151 -Info: Pi3 uses a GPIO expander to drive the LEDs which can only be accessed
152 - from the VPU. There is a special driver for this with a separate DT
153 - node, which has the unfortunate consequence of breaking the
154 - act_led_gpio and act_led_activelow dtparams.
155 - This overlay changes the GPIO controller back to the standard one and
156 - restores the dtparams.
157 -Load: dtoverlay=pi3-act-led,<param>=<val>
158 -Params: activelow Set to "on" to invert the sense of the LED
159 - (default "off")
160 -
161 - gpio Set which GPIO to use for the activity LED
162 - (in case you want to connect it to an external
163 - device)
164 - REQUIRED
165 +Info: This overlay has been renamed act-led, keeping pi3-act-led as an alias
166 + for backwards compatibility.
167 +Load: <Deprecated>
168
169
170 Name: pi3-disable-bt
171 -Info: Disable Pi3 Bluetooth and restore UART0/ttyAMA0 over GPIOs 14 & 15
172 - N.B. To disable the systemd service that initialises the modem so it
173 - doesn't use the UART, use 'sudo systemctl disable hciuart'.
174 -Load: dtoverlay=pi3-disable-bt
175 -Params: <None>
176 +Info: This overlay has been renamed disable-bt, keeping pi3-disable-bt as an
177 + alias for backwards compatibility.
178 +Load: <Deprecated>
179
180
181 Name: pi3-disable-wifi
182 -Info: Disable Pi3 onboard WiFi
183 -Load: dtoverlay=pi3-disable-wifi
184 -Params: <None>
185 +Info: This overlay has been renamed disable-wifi, keeping pi3-disable-wifi as
186 + an alias for backwards compatibility.
187 +Load: <Deprecated>
188
189
190 Name: pi3-miniuart-bt
191 -Info: Switch Pi3 Bluetooth function to use the mini-UART (ttyS0) and restore
192 - UART0/ttyAMA0 over GPIOs 14 & 15. Note that this may reduce the maximum
193 - usable baudrate.
194 - N.B. It is also necessary to edit /lib/systemd/system/hciuart.service
195 - and replace ttyAMA0 with ttyS0, unless you have a system with udev rules
196 - that create /dev/serial0 and /dev/serial1, in which case use
197 - /dev/serial1 instead because it will always be correct. Furthermore,
198 - you must also set core_freq=250 in config.txt or the miniuart will not
199 - work.
200 -Load: dtoverlay=pi3-miniuart-bt
201 -Params: <None>
202 +Info: This overlay has been renamed miniuart-bt, keeping pi3-miniuart-bt as
203 + an alias for backwards compatibility.
204 +Load: <Deprecated>
205
206
207 Name: pibell
208 --- /dev/null
209 +++ b/arch/arm/boot/dts/overlays/act-led-overlay.dts
210 @@ -0,0 +1,27 @@
211 +/dts-v1/;
212 +/plugin/;
213 +
214 +/* Pi3 uses a GPIO expander to drive the LEDs which can only be accessed
215 + from the VPU. There is a special driver for this with a separate DT node,
216 + which has the unfortunate consequence of breaking the act_led_gpio and
217 + act_led_activelow dtparams.
218 +
219 + This overlay changes the GPIO controller back to the standard one and
220 + restores the dtparams.
221 +*/
222 +
223 +/{
224 + compatible = "brcm,bcm2835";
225 +
226 + fragment@0 {
227 + target = <&act_led>;
228 + frag0: __overlay__ {
229 + gpios = <&gpio 0 0>;
230 + };
231 + };
232 +
233 + __overrides__ {
234 + gpio = <&frag0>,"gpios:4";
235 + activelow = <&frag0>,"gpios:8";
236 + };
237 +};
238 --- /dev/null
239 +++ b/arch/arm/boot/dts/overlays/disable-bt-overlay.dts
240 @@ -0,0 +1,55 @@
241 +/dts-v1/;
242 +/plugin/;
243 +
244 +/* Disable Bluetooth and restore UART0/ttyAMA0 over GPIOs 14 & 15.
245 + To disable the systemd service that initialises the modem so it doesn't use
246 + the UART:
247 +
248 + sudo systemctl disable hciuart
249 +*/
250 +
251 +/{
252 + compatible = "brcm,bcm2835";
253 +
254 + fragment@0 {
255 + target = <&uart1>;
256 + __overlay__ {
257 + status = "disabled";
258 + };
259 + };
260 +
261 + fragment@1 {
262 + target = <&uart0>;
263 + __overlay__ {
264 + pinctrl-names = "default";
265 + pinctrl-0 = <&uart0_pins>;
266 + status = "okay";
267 + };
268 + };
269 +
270 + fragment@2 {
271 + target = <&uart0_pins>;
272 + __overlay__ {
273 + brcm,pins;
274 + brcm,function;
275 + brcm,pull;
276 + };
277 + };
278 +
279 + fragment@3 {
280 + target = <&bt_pins>;
281 + __overlay__ {
282 + brcm,pins;
283 + brcm,function;
284 + brcm,pull;
285 + };
286 + };
287 +
288 + fragment@4 {
289 + target-path = "/aliases";
290 + __overlay__ {
291 + serial0 = "/soc/serial@7e201000";
292 + serial1 = "/soc/serial@7e215040";
293 + };
294 + };
295 +};
296 --- /dev/null
297 +++ b/arch/arm/boot/dts/overlays/disable-wifi-overlay.dts
298 @@ -0,0 +1,20 @@
299 +/dts-v1/;
300 +/plugin/;
301 +
302 +/{
303 + compatible = "brcm,bcm2835";
304 +
305 + fragment@0 {
306 + target = <&mmc>;
307 + __overlay__ {
308 + status = "disabled";
309 + };
310 + };
311 +
312 + fragment@1 {
313 + target = <&mmcnr>;
314 + __overlay__ {
315 + status = "disabled";
316 + };
317 + };
318 +};
319 --- /dev/null
320 +++ b/arch/arm/boot/dts/overlays/miniuart-bt-overlay.dts
321 @@ -0,0 +1,74 @@
322 +/dts-v1/;
323 +/plugin/;
324 +
325 +/* Switch Pi3 Bluetooth function to use the mini-UART (ttyS0) and restore
326 + UART0/ttyAMA0 over GPIOs 14 & 15. Note that this may reduce the maximum
327 + usable baudrate.
328 +
329 + It is also necessary to edit /lib/systemd/system/hciuart.service and
330 + replace ttyAMA0 with ttyS0, unless you have a system with udev rules
331 + that create /dev/serial0 and /dev/serial1, in which case use /dev/serial1
332 + instead because it will always be correct.
333 +
334 + If cmdline.txt uses the alias serial0 to refer to the user-accessable port
335 + then the firmware will replace with the appropriate port whether or not
336 + this overlay is used.
337 +*/
338 +
339 +/{
340 + compatible = "brcm,bcm2835";
341 +
342 + fragment@0 {
343 + target = <&uart0>;
344 + __overlay__ {
345 + pinctrl-names = "default";
346 + pinctrl-0 = <&uart0_pins>;
347 + status = "okay";
348 + };
349 + };
350 +
351 + fragment@1 {
352 + target = <&uart1>;
353 + __overlay__ {
354 + pinctrl-names = "default";
355 + pinctrl-0 = <&uart1_pins &bt_pins &fake_bt_cts>;
356 + status = "okay";
357 + };
358 + };
359 +
360 + fragment@2 {
361 + target = <&uart0_pins>;
362 + __overlay__ {
363 + brcm,pins;
364 + brcm,function;
365 + brcm,pull;
366 + };
367 + };
368 +
369 + fragment@3 {
370 + target = <&uart1_pins>;
371 + __overlay__ {
372 + brcm,pins = <32 33>;
373 + brcm,function = <2>; /* alt5=UART1 */
374 + brcm,pull = <0 2>;
375 + };
376 + };
377 +
378 + fragment@4 {
379 + target = <&gpio>;
380 + __overlay__ {
381 + fake_bt_cts: fake_bt_cts {
382 + brcm,pins = <31>;
383 + brcm,function = <1>; /* output */
384 + };
385 + };
386 + };
387 +
388 + fragment@5 {
389 + target-path = "/aliases";
390 + __overlay__ {
391 + serial0 = "/soc/serial@7e201000";
392 + serial1 = "/soc/serial@7e215040";
393 + };
394 + };
395 +};
396 --- a/arch/arm/boot/dts/overlays/pi3-act-led-overlay.dts
397 +++ b/arch/arm/boot/dts/overlays/pi3-act-led-overlay.dts
398 @@ -1,27 +1 @@
399 -/dts-v1/;
400 -/plugin/;
401 -
402 -/* Pi3 uses a GPIO expander to drive the LEDs which can only be accessed
403 - from the VPU. There is a special driver for this with a separate DT node,
404 - which has the unfortunate consequence of breaking the act_led_gpio and
405 - act_led_activelow dtparams.
406 -
407 - This overlay changes the GPIO controller back to the standard one and
408 - restores the dtparams.
409 -*/
410 -
411 -/{
412 - compatible = "brcm,bcm2835";
413 -
414 - fragment@0 {
415 - target = <&act_led>;
416 - frag0: __overlay__ {
417 - gpios = <&gpio 0 0>;
418 - };
419 - };
420 -
421 - __overrides__ {
422 - gpio = <&frag0>,"gpios:4";
423 - activelow = <&frag0>,"gpios:8";
424 - };
425 -};
426 +#include "act-led-overlay.dts"
427 --- a/arch/arm/boot/dts/overlays/pi3-disable-bt-overlay.dts
428 +++ b/arch/arm/boot/dts/overlays/pi3-disable-bt-overlay.dts
429 @@ -1,55 +1 @@
430 -/dts-v1/;
431 -/plugin/;
432 -
433 -/* Disable Bluetooth and restore UART0/ttyAMA0 over GPIOs 14 & 15.
434 - To disable the systemd service that initialises the modem so it doesn't use
435 - the UART:
436 -
437 - sudo systemctl disable hciuart
438 -*/
439 -
440 -/{
441 - compatible = "brcm,bcm2835";
442 -
443 - fragment@0 {
444 - target = <&uart1>;
445 - __overlay__ {
446 - status = "disabled";
447 - };
448 - };
449 -
450 - fragment@1 {
451 - target = <&uart0>;
452 - __overlay__ {
453 - pinctrl-names = "default";
454 - pinctrl-0 = <&uart0_pins>;
455 - status = "okay";
456 - };
457 - };
458 -
459 - fragment@2 {
460 - target = <&uart0_pins>;
461 - __overlay__ {
462 - brcm,pins;
463 - brcm,function;
464 - brcm,pull;
465 - };
466 - };
467 -
468 - fragment@3 {
469 - target = <&bt_pins>;
470 - __overlay__ {
471 - brcm,pins;
472 - brcm,function;
473 - brcm,pull;
474 - };
475 - };
476 -
477 - fragment@4 {
478 - target-path = "/aliases";
479 - __overlay__ {
480 - serial0 = "/soc/serial@7e201000";
481 - serial1 = "/soc/serial@7e215040";
482 - };
483 - };
484 -};
485 +#include "disable-bt-overlay.dts"
486 --- a/arch/arm/boot/dts/overlays/pi3-disable-wifi-overlay.dts
487 +++ b/arch/arm/boot/dts/overlays/pi3-disable-wifi-overlay.dts
488 @@ -1,20 +1 @@
489 -/dts-v1/;
490 -/plugin/;
491 -
492 -/{
493 - compatible = "brcm,bcm2835";
494 -
495 - fragment@0 {
496 - target = <&mmc>;
497 - __overlay__ {
498 - status = "disabled";
499 - };
500 - };
501 -
502 - fragment@1 {
503 - target = <&mmcnr>;
504 - __overlay__ {
505 - status = "disabled";
506 - };
507 - };
508 -};
509 +#include "disable-wifi-overlay.dts"
510 --- a/arch/arm/boot/dts/overlays/pi3-miniuart-bt-overlay.dts
511 +++ b/arch/arm/boot/dts/overlays/pi3-miniuart-bt-overlay.dts
512 @@ -1,74 +1 @@
513 -/dts-v1/;
514 -/plugin/;
515 -
516 -/* Switch Pi3 Bluetooth function to use the mini-UART (ttyS0) and restore
517 - UART0/ttyAMA0 over GPIOs 14 & 15. Note that this may reduce the maximum
518 - usable baudrate.
519 -
520 - It is also necessary to edit /lib/systemd/system/hciuart.service and
521 - replace ttyAMA0 with ttyS0, unless you have a system with udev rules
522 - that create /dev/serial0 and /dev/serial1, in which case use /dev/serial1
523 - instead because it will always be correct.
524 -
525 - If cmdline.txt uses the alias serial0 to refer to the user-accessable port
526 - then the firmware will replace with the appropriate port whether or not
527 - this overlay is used.
528 -*/
529 -
530 -/{
531 - compatible = "brcm,bcm2835";
532 -
533 - fragment@0 {
534 - target = <&uart0>;
535 - __overlay__ {
536 - pinctrl-names = "default";
537 - pinctrl-0 = <&uart0_pins>;
538 - status = "okay";
539 - };
540 - };
541 -
542 - fragment@1 {
543 - target = <&uart1>;
544 - __overlay__ {
545 - pinctrl-names = "default";
546 - pinctrl-0 = <&uart1_pins &bt_pins &fake_bt_cts>;
547 - status = "okay";
548 - };
549 - };
550 -
551 - fragment@2 {
552 - target = <&uart0_pins>;
553 - __overlay__ {
554 - brcm,pins;
555 - brcm,function;
556 - brcm,pull;
557 - };
558 - };
559 -
560 - fragment@3 {
561 - target = <&uart1_pins>;
562 - __overlay__ {
563 - brcm,pins = <32 33>;
564 - brcm,function = <2>; /* alt5=UART1 */
565 - brcm,pull = <0 2>;
566 - };
567 - };
568 -
569 - fragment@4 {
570 - target = <&gpio>;
571 - __overlay__ {
572 - fake_bt_cts: fake_bt_cts {
573 - brcm,pins = <31>;
574 - brcm,function = <1>; /* output */
575 - };
576 - };
577 - };
578 -
579 - fragment@5 {
580 - target-path = "/aliases";
581 - __overlay__ {
582 - serial0 = "/soc/serial@7e201000";
583 - serial1 = "/soc/serial@7e215040";
584 - };
585 - };
586 -};
587 +#include "miniuart-bt-overlay.dts"
John Crispins staging tree