git.openwrt.org Git - openwrt/staging/robimarko.git/blob

   1 From a6a86473350c7dcbae61afa1e926941d76ca17ed Mon Sep 17 00:00:00 2001
   2 From: Laurentiu Tudor <laurentiu.tudor@nxp.com>
   3 Date: Thu, 20 Sep 2018 13:46:54 +0300
   4 Subject: [PATCH] arm64: dts: ls104x: use a pseudo-bus to constrain usb dma
   5  size
   6
   7 Wrap the usb controllers in an intermediate simple-bus and use it to
   8 constrain the dma address size of these usb controllers to the 40 bits
   9 that they generate toward the interconnect.
  10 This is required because the SoC uses 48 bits address sizes and this
  11 mismatch would lead to smmu context faults because the usb generates
  12 40-bit addresses while the smmu page tables are populated with 48-bit
  13 wide addresses.
  14
  15 Suggested-by: Robin Murphy <robin.murphy@arm.com>
  16 Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com>
  17 ---
  18  arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 82 ++++++++++++++------------
  19  arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 76 +++++++++++++-----------
  20  2 files changed, 87 insertions(+), 71 deletions(-)
  21
  22 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
  23 +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
  24 @@ -726,43 +726,51 @@
  25                                  <&clockgen 4 0>;
  26                 };
  27
  28 -               usb0: usb3@2f00000 {
  29 -                       compatible = "snps,dwc3";
  30 -                       reg = <0x0 0x2f00000 0x0 0x10000>;
  31 -                       interrupts = <0 60 0x4>;
  32 -                       dr_mode = "host";
  33 -                       snps,quirk-frame-length-adjustment = <0x20>;
  34 -                       snps,dis_rxdet_inp3_quirk;
  35 -                       usb3-lpm-capable;
  36 -                       snps,dis-u1u2-when-u3-quirk;
  37 -                       snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
  38 -                       configure-gfladj;
  39 -               };
  40 +               usb_aux_bus: usb_aux_bus {
  41 +                       #address-cells = <2>;
  42 +                       #size-cells = <2>;
  43 +                       compatible = "simple-bus";
  44 +                       ranges;
  45 +                       dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x00000000>;
  46
  47 -               usb1: usb3@3000000 {
  48 -                       compatible = "snps,dwc3";
  49 -                       reg = <0x0 0x3000000 0x0 0x10000>;
  50 -                       interrupts = <0 61 0x4>;
  51 -                       dr_mode = "host";
  52 -                       snps,quirk-frame-length-adjustment = <0x20>;
  53 -                       snps,dis_rxdet_inp3_quirk;
  54 -                       usb3-lpm-capable;
  55 -                       snps,dis-u1u2-when-u3-quirk;
  56 -                       snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
  57 -                       configure-gfladj;
  58 -               };
  59 +                       usb0: usb3@2f00000 {
  60 +                               compatible = "snps,dwc3";
  61 +                               reg = <0x0 0x2f00000 0x0 0x10000>;
  62 +                               interrupts = <0 60 0x4>;
  63 +                               dr_mode = "host";
  64 +                               snps,quirk-frame-length-adjustment = <0x20>;
  65 +                               snps,dis_rxdet_inp3_quirk;
  66 +                               usb3-lpm-capable;
  67 +                               snps,dis-u1u2-when-u3-quirk;
  68 +                               snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
  69 +                               configure-gfladj;
  70 +                       };
  71 +
  72 +                       usb1: usb3@3000000 {
  73 +                               compatible = "snps,dwc3";
  74 +                               reg = <0x0 0x3000000 0x0 0x10000>;
  75 +                               interrupts = <0 61 0x4>;
  76 +                               dr_mode = "host";
  77 +                               snps,quirk-frame-length-adjustment = <0x20>;
  78 +                               snps,dis_rxdet_inp3_quirk;
  79 +                               usb3-lpm-capable;
  80 +                               snps,dis-u1u2-when-u3-quirk;
  81 +                               snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
  82 +                               configure-gfladj;
  83 +                       };
  84
  85 -               usb2: usb3@3100000 {
  86 -                       compatible = "snps,dwc3";
  87 -                       reg = <0x0 0x3100000 0x0 0x10000>;
  88 -                       interrupts = <0 63 0x4>;
  89 -                       dr_mode = "host";
  90 -                       snps,quirk-frame-length-adjustment = <0x20>;
  91 -                       snps,dis_rxdet_inp3_quirk;
  92 -                       usb3-lpm-capable;
  93 -                       snps,dis-u1u2-when-u3-quirk;
  94 -                       snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
  95 -                       configure-gfladj;
  96 +                       usb2: usb3@3100000 {
  97 +                               compatible = "snps,dwc3";
  98 +                               reg = <0x0 0x3100000 0x0 0x10000>;
  99 +                               interrupts = <0 63 0x4>;
 100 +                               dr_mode = "host";
 101 +                               snps,quirk-frame-length-adjustment = <0x20>;
 102 +                               snps,dis_rxdet_inp3_quirk;
 103 +                               usb3-lpm-capable;
 104 +                               snps,dis-u1u2-when-u3-quirk;
 105 +                               snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
 106 +                               configure-gfladj;
 107 +                       };
 108                 };
 109
 110                 sata: sata@3200000 {
 111 --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
 112 +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
 113 @@ -624,40 +624,48 @@
 114                                  <&clockgen 4 1>;
 115                 };
 116
 117 -               usb0: usb@2f00000 {
 118 -                       compatible = "snps,dwc3";
 119 -                       reg = <0x0 0x2f00000 0x0 0x10000>;
 120 -                       interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
 121 -                       dr_mode = "host";
 122 -                       snps,quirk-frame-length-adjustment = <0x20>;
 123 -                       snps,dis_rxdet_inp3_quirk;
 124 -                       snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
 125 -                       usb3-lpm-capable;
 126 -                       snps,dis-u1u2-when-u3-quirk;
 127 -               };
 128 +               usb_aux_bus: usb_aux_bus {
 129 +                       #address-cells = <2>;
 130 +                       #size-cells = <2>;
 131 +                       compatible = "simple-bus";
 132 +                       ranges;
 133 +                       dma-ranges = <0x0 0x0 0x0 0x0 0x100 0x00000000>;
 134
 135 -               usb1: usb@3000000 {
 136 -                       compatible = "snps,dwc3";
 137 -                       reg = <0x0 0x3000000 0x0 0x10000>;
 138 -                       interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
 139 -                       dr_mode = "host";
 140 -                       snps,quirk-frame-length-adjustment = <0x20>;
 141 -                       snps,dis_rxdet_inp3_quirk;
 142 -                       snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
 143 -                       usb3-lpm-capable;
 144 -                       snps,dis-u1u2-when-u3-quirk;
 145 -               };
 146 +                       usb0: usb@2f00000 {
 147 +                               compatible = "snps,dwc3";
 148 +                               reg = <0x0 0x2f00000 0x0 0x10000>;
 149 +                               interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
 150 +                               dr_mode = "host";
 151 +                               snps,quirk-frame-length-adjustment = <0x20>;
 152 +                               snps,dis_rxdet_inp3_quirk;
 153 +                               snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
 154 +                               usb3-lpm-capable;
 155 +                               snps,dis-u1u2-when-u3-quirk;
 156 +                       };
 157 +
 158 +                       usb1: usb@3000000 {
 159 +                               compatible = "snps,dwc3";
 160 +                               reg = <0x0 0x3000000 0x0 0x10000>;
 161 +                               interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
 162 +                               dr_mode = "host";
 163 +                               snps,quirk-frame-length-adjustment = <0x20>;
 164 +                               snps,dis_rxdet_inp3_quirk;
 165 +                               snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
 166 +                               usb3-lpm-capable;
 167 +                               snps,dis-u1u2-when-u3-quirk;
 168 +                       };
 169
 170 -               usb2: usb@3100000 {
 171 -                       compatible = "snps,dwc3";
 172 -                       reg = <0x0 0x3100000 0x0 0x10000>;
 173 -                       interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
 174 -                       dr_mode = "host";
 175 -                       snps,quirk-frame-length-adjustment = <0x20>;
 176 -                       snps,dis_rxdet_inp3_quirk;
 177 -                       snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
 178 -                       usb3-lpm-capable;
 179 -                       snps,dis-u1u2-when-u3-quirk;
 180 +                       usb2: usb@3100000 {
 181 +                               compatible = "snps,dwc3";
 182 +                               reg = <0x0 0x3100000 0x0 0x10000>;
 183 +                               interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
 184 +                               dr_mode = "host";
 185 +                               snps,quirk-frame-length-adjustment = <0x20>;
 186 +                               snps,dis_rxdet_inp3_quirk;
 187 +                               snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
 188 +                               usb3-lpm-capable;
 189 +                               snps,dis-u1u2-when-u3-quirk;
 190 +                       };
 191                 };
 192
 193                 sata: sata@3200000 {