git.openwrt.org Git - openwrt/staging/ynezz.git/blob

   1 From bdecfcdb5461834aab24002bb18d3cbdd907b7fb Mon Sep 17 00:00:00 2001
   2 From: Huang Rui <ray.huang@amd.com>
   3 Date: Mon, 23 Nov 2015 18:07:35 +0800
   4 Subject: [PATCH] sp5100_tco: fix the device check for SB800 and later chipsets
   5
   6 For SB800 and later chipsets, the register definitions are the same
   7 with SB800. And for SB700 and older chipsets, the definitions should
   8 be same with SP5100/SB7x0.
   9
  10 Signed-off-by: Huang Rui <ray.huang@amd.com>
  11 Cc: Denis Turischev <denis.turischev@compulab.co.il>
  12 Signed-off-by: Guenter Roeck <linux@roeck-us.net>
  13 Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
  14 ---
  15  drivers/watchdog/sp5100_tco.c | 28 ++++++++++++++++------------
  16  1 file changed, 16 insertions(+), 12 deletions(-)
  17
  18 diff --git a/drivers/watchdog/sp5100_tco.c b/drivers/watchdog/sp5100_tco.c
  19 index 0ccadb4..6467b91 100644
  20 --- a/drivers/watchdog/sp5100_tco.c
  21 +++ b/drivers/watchdog/sp5100_tco.c
  22 @@ -335,21 +335,24 @@ static unsigned char sp5100_tco_setupdevice(void)
  23         if (!sp5100_tco_pci)
  24                 return 0;
  25
  26 -       pr_info("PCI Revision ID: 0x%x\n", sp5100_tco_pci->revision);
  27 +       pr_info("PCI Vendor ID: 0x%x, Device ID: 0x%x, Revision ID: 0x%x\n",
  28 +               sp5100_tco_pci->vendor, sp5100_tco_pci->device,
  29 +               sp5100_tco_pci->revision);
  30
  31         /*
  32          * Determine type of southbridge chipset.
  33          */
  34 -       if (sp5100_tco_pci->revision >= 0x40) {
  35 -               dev_name = SB800_DEVNAME;
  36 -               index_reg = SB800_IO_PM_INDEX_REG;
  37 -               data_reg = SB800_IO_PM_DATA_REG;
  38 -               base_addr = SB800_PM_WATCHDOG_BASE;
  39 -       } else {
  40 +       if (sp5100_tco_pci->device == PCI_DEVICE_ID_ATI_SBX00_SMBUS &&
  41 +           sp5100_tco_pci->revision < 0x40) {
  42                 dev_name = SP5100_DEVNAME;
  43                 index_reg = SP5100_IO_PM_INDEX_REG;
  44                 data_reg = SP5100_IO_PM_DATA_REG;
  45                 base_addr = SP5100_PM_WATCHDOG_BASE;
  46 +       } else {
  47 +               dev_name = SB800_DEVNAME;
  48 +               index_reg = SB800_IO_PM_INDEX_REG;
  49 +               data_reg = SB800_IO_PM_DATA_REG;
  50 +               base_addr = SB800_PM_WATCHDOG_BASE;
  51         }
  52
  53         /* Request the IO ports used by this driver */
  54 @@ -385,7 +388,12 @@ static unsigned char sp5100_tco_setupdevice(void)
  55          * Secondly, Find the watchdog timer MMIO address
  56          * from SBResource_MMIO register.
  57          */
  58 -       if (sp5100_tco_pci->revision >= 0x40) {
  59 +       if (sp5100_tco_pci->device == PCI_DEVICE_ID_ATI_SBX00_SMBUS &&
  60 +           sp5100_tco_pci->revision < 0x40) {
  61 +               /* Read SBResource_MMIO from PCI config(PCI_Reg: 9Ch) */
  62 +               pci_read_config_dword(sp5100_tco_pci,
  63 +                                     SP5100_SB_RESOURCE_MMIO_BASE, &val);
  64 +       } else {
  65                 /* Read SBResource_MMIO from AcpiMmioEn(PM_Reg: 24h) */
  66                 outb(SB800_PM_ACPI_MMIO_EN+3, SB800_IO_PM_INDEX_REG);
  67                 val = inb(SB800_IO_PM_DATA_REG);
  68 @@ -395,10 +403,6 @@ static unsigned char sp5100_tco_setupdevice(void)
  69                 val = val << 8 | inb(SB800_IO_PM_DATA_REG);
  70                 outb(SB800_PM_ACPI_MMIO_EN+0, SB800_IO_PM_INDEX_REG);
  71                 val = val << 8 | inb(SB800_IO_PM_DATA_REG);
  72 -       } else {
  73 -               /* Read SBResource_MMIO from PCI config(PCI_Reg: 9Ch) */
  74 -               pci_read_config_dword(sp5100_tco_pci,
  75 -                                     SP5100_SB_RESOURCE_MMIO_BASE, &val);
  76         }
  77
  78         /* The SBResource_MMIO is enabled and mapped memory space? */
  79 --
  80 2.7.4