git.openwrt.org Git - openwrt/staging/neocturne.git/blob

   1 From 5353102f2d7e2f61cca4014aacfa3ac9a71aaeea Mon Sep 17 00:00:00 2001
   2 From: Jonathan Bell <jonathan@raspberrypi.org>
   3 Date: Fri, 17 May 2019 13:31:21 +0100
   4 Subject: [PATCH 551/703] phy: bcm54213pe: configure the LED outputs to be more
   5  user-friendly
   6
   7 The default state was both LEDs indicating link speed.
   8
   9 Change the default configuration to
  10 - Amber: 1000/100 link speed indication
  11 - Green: link present + activity indication
  12
  13 Signed-off-by: Jonathan Bell <jonathan@raspberrypi.org>
  14 ---
  15  drivers/net/phy/broadcom.c | 17 +++++++++++++++++
  16  include/linux/brcmphy.h    |  4 ++++
  17  2 files changed, 21 insertions(+)
  18
  19 --- a/drivers/net/phy/broadcom.c
  20 +++ b/drivers/net/phy/broadcom.c
  21 @@ -52,6 +52,21 @@ static int bcm54210e_config_init(struct
  22         return 0;
  23  }
  24
  25 +static void bcm54213pe_config_init(struct phy_device *phydev)
  26 +{
  27 +       u16 val;
  28 +
  29 +       /* Enable ACT+LINK indication on ACTIVITY trigger */
  30 +       val = bcm_phy_read_shadow(phydev, BCM54XX_SHD_LEDCTL);
  31 +       val |= BCM54XX_SHD_LEDCTL_ACTLINK_EN;
  32 +       bcm_phy_write_shadow(phydev, BCM54XX_SHD_LEDCTL, val);
  33 +
  34 +       /* Set ACTIVITY on LED "1" output, LINKSPD[1] on LED "3" output */
  35 +       val = BCM5482_SHD_LEDS1_LED1(BCM_LED_SRC_ACTIVITYLED) |
  36 +               BCM5482_SHD_LEDS1_LED3(BCM_LED_SRC_LINKSPD1);
  37 +       bcm_phy_write_shadow(phydev, BCM5482_SHD_LEDS1, val);
  38 +}
  39 +
  40  static int bcm54612e_config_init(struct phy_device *phydev)
  41  {
  42         int reg;
  43 @@ -310,6 +325,8 @@ static int bcm54xx_config_init(struct ph
  44                 err = bcm54210e_config_init(phydev);
  45                 if (err)
  46                         return err;
  47 +       } else if (BRCM_PHY_MODEL(phydev) == PHY_ID_BCM54213PE) {
  48 +               bcm54213pe_config_init(phydev);
  49         } else if (BRCM_PHY_MODEL(phydev) == PHY_ID_BCM54612E) {
  50                 err = bcm54612e_config_init(phydev);
  51                 if (err)
  52 --- a/include/linux/brcmphy.h
  53 +++ b/include/linux/brcmphy.h
  54 @@ -168,6 +168,10 @@
  55  #define  BCM54XX_SHD_SCR3_DLLAPD_DIS   0x0002
  56  #define  BCM54XX_SHD_SCR3_TRDDAPD      0x0004
  57
  58 +/* 01001: Additional LED trigger options */
  59 +#define BCM54XX_SHD_LEDCTL             0x09
  60 +#define  BCM54XX_SHD_LEDCTL_ACTLINK_EN 0x0010
  61 +
  62  /* 01010: Auto Power-Down */
  63  #define BCM54XX_SHD_APD                        0x0a
  64  #define  BCM_APD_CLR_MASK              0xFE9F /* clear bits 5, 6 & 8 */