git.openwrt.org Git - openwrt/staging/zorun.git/blob

   1 From 268bd5b5557ccb0ac4eae998ad7c6261c240b89b Mon Sep 17 00:00:00 2001
   2 From: Stefan Wahren <wahrenst@gmx.net>
   3 Date: Sun, 21 Jul 2019 16:01:36 +0200
   4 Subject: [PATCH] pinctrl: bcm2835: Add support for BCM2711 pull-up
   5  functionality
   6
   7 commit e38a9a437fb93ddafab5030165e4c6a3a5021669 upstream.
   8
   9 The BCM2711 has a new way of selecting the pull-up/pull-down setting
  10 for a GPIO pin. The registers used for the BCM2835, GP_PUD and
  11 GP_PUDCLKn0, are no longer connected. A new set of registers,
  12 GP_GPIO_PUP_PDN_CNTRL_REGx must be used. This commit will add
  13 a new compatible string "brcm,bcm2711-gpio" and the kernel
  14 driver will use it to select which method is used to select
  15 pull-up/pull-down.
  16
  17 This patch based on a patch by Al Cooper which was intended for the
  18 BCM7211. This is a bugfixed and improved version.
  19
  20 Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
  21 Acked-by: Eric Anholt <eric@anholt.net>
  22 ---
  23  drivers/pinctrl/bcm/pinctrl-bcm2835.c | 105 ++++++++++++++++++++++++--
  24  1 file changed, 100 insertions(+), 5 deletions(-)
  25
  26 --- a/drivers/pinctrl/bcm/pinctrl-bcm2835.c
  27 +++ b/drivers/pinctrl/bcm/pinctrl-bcm2835.c
  28 @@ -57,15 +57,24 @@
  29  #define GPAFEN0                0x88    /* Pin Async Falling Edge Detect */
  30  #define GPPUD          0x94    /* Pin Pull-up/down Enable */
  31  #define GPPUDCLK0      0x98    /* Pin Pull-up/down Enable Clock */
  32 +#define GP_GPIO_PUP_PDN_CNTRL_REG0 0xe4 /* 2711 Pin Pull-up/down select */
  33
  34  #define FSEL_REG(p)            (GPFSEL0 + (((p) / 10) * 4))
  35  #define FSEL_SHIFT(p)          (((p) % 10) * 3)
  36  #define GPIO_REG_OFFSET(p)     ((p) / 32)
  37  #define GPIO_REG_SHIFT(p)      ((p) % 32)
  38
  39 +#define PUD_2711_MASK          0x3
  40 +#define PUD_2711_REG_OFFSET(p) ((p) / 16)
  41 +#define PUD_2711_REG_SHIFT(p)  (((p) % 16) * 2)
  42 +
  43  /* argument: bcm2835_pinconf_pull */
  44  #define BCM2835_PINCONF_PARAM_PULL     (PIN_CONFIG_END + 1)
  45
  46 +#define BCM2711_PULL_NONE      0x0
  47 +#define BCM2711_PULL_UP                0x1
  48 +#define BCM2711_PULL_DOWN      0x2
  49 +
  50  struct bcm2835_pinctrl {
  51         struct device *dev;
  52         void __iomem *base;
  53 @@ -975,6 +984,77 @@ static const struct pinconf_ops bcm2835_
  54         .pin_config_set = bcm2835_pinconf_set,
  55  };
  56
  57 +static void bcm2711_pull_config_set(struct bcm2835_pinctrl *pc,
  58 +                                   unsigned int pin, unsigned int arg)
  59 +{
  60 +       u32 shifter;
  61 +       u32 value;
  62 +       u32 off;
  63 +
  64 +       off = PUD_2711_REG_OFFSET(pin);
  65 +       shifter = PUD_2711_REG_SHIFT(pin);
  66 +
  67 +       value = bcm2835_gpio_rd(pc, GP_GPIO_PUP_PDN_CNTRL_REG0 + (off * 4));
  68 +       value &= ~(PUD_2711_MASK << shifter);
  69 +       value |= (arg << shifter);
  70 +       bcm2835_gpio_wr(pc, GP_GPIO_PUP_PDN_CNTRL_REG0 + (off * 4), value);
  71 +}
  72 +
  73 +static int bcm2711_pinconf_set(struct pinctrl_dev *pctldev,
  74 +                              unsigned int pin, unsigned long *configs,
  75 +                              unsigned int num_configs)
  76 +{
  77 +       struct bcm2835_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
  78 +       u32 param, arg;
  79 +       int i;
  80 +
  81 +       for (i = 0; i < num_configs; i++) {
  82 +               param = pinconf_to_config_param(configs[i]);
  83 +               arg = pinconf_to_config_argument(configs[i]);
  84 +
  85 +               switch (param) {
  86 +               /* convert legacy brcm,pull */
  87 +               case BCM2835_PINCONF_PARAM_PULL:
  88 +                       if (arg == BCM2835_PUD_UP)
  89 +                               arg = BCM2711_PULL_UP;
  90 +                       else if (arg == BCM2835_PUD_DOWN)
  91 +                               arg = BCM2711_PULL_DOWN;
  92 +                       else
  93 +                               arg = BCM2711_PULL_NONE;
  94 +
  95 +                       bcm2711_pull_config_set(pc, pin, arg);
  96 +                       break;
  97 +
  98 +               /* Set pull generic bindings */
  99 +               case PIN_CONFIG_BIAS_DISABLE:
 100 +                       bcm2711_pull_config_set(pc, pin, BCM2711_PULL_NONE);
 101 +                       break;
 102 +               case PIN_CONFIG_BIAS_PULL_DOWN:
 103 +                       bcm2711_pull_config_set(pc, pin, BCM2711_PULL_DOWN);
 104 +                       break;
 105 +               case PIN_CONFIG_BIAS_PULL_UP:
 106 +                       bcm2711_pull_config_set(pc, pin, BCM2711_PULL_UP);
 107 +                       break;
 108 +
 109 +               /* Set output-high or output-low */
 110 +               case PIN_CONFIG_OUTPUT:
 111 +                       bcm2835_gpio_set_bit(pc, arg ? GPSET0 : GPCLR0, pin);
 112 +                       break;
 113 +
 114 +               default:
 115 +                       return -ENOTSUPP;
 116 +               }
 117 +       } /* for each config */
 118 +
 119 +       return 0;
 120 +}
 121 +
 122 +static const struct pinconf_ops bcm2711_pinconf_ops = {
 123 +       .is_generic = true,
 124 +       .pin_config_get = bcm2835_pinconf_get,
 125 +       .pin_config_set = bcm2711_pinconf_set,
 126 +};
 127 +
 128  static struct pinctrl_desc bcm2835_pinctrl_desc = {
 129         .name = MODULE_NAME,
 130         .pins = bcm2835_gpio_pins,
 131 @@ -990,6 +1070,18 @@ static struct pinctrl_gpio_range bcm2835
 132         .npins = BCM2835_NUM_GPIOS,
 133  };
 134
 135 +static const struct of_device_id bcm2835_pinctrl_match[] = {
 136 +       {
 137 +               .compatible = "brcm,bcm2835-gpio",
 138 +               .data = &bcm2835_pinconf_ops,
 139 +       },
 140 +       {
 141 +               .compatible = "brcm,bcm2711-gpio",
 142 +               .data = &bcm2711_pinconf_ops,
 143 +       },
 144 +       {}
 145 +};
 146 +
 147  static int bcm2835_pinctrl_probe(struct platform_device *pdev)
 148  {
 149         struct device *dev = &pdev->dev;
 150 @@ -997,6 +1089,8 @@ static int bcm2835_pinctrl_probe(struct
 151         struct bcm2835_pinctrl *pc;
 152         struct resource iomem;
 153         int err, i;
 154 +       const struct of_device_id *match;
 155 +
 156         BUILD_BUG_ON(ARRAY_SIZE(bcm2835_gpio_pins) != BCM2835_NUM_GPIOS);
 157         BUILD_BUG_ON(ARRAY_SIZE(bcm2835_gpio_groups) != BCM2835_NUM_GPIOS);
 158
 159 @@ -1073,6 +1167,12 @@ static int bcm2835_pinctrl_probe(struct
 160                                              bcm2835_gpio_irq_handler);
 161         }
 162
 163 +       match = of_match_node(bcm2835_pinctrl_match, pdev->dev.of_node);
 164 +       if (match) {
 165 +               bcm2835_pinctrl_desc.confops =
 166 +                       (const struct pinconf_ops *)match->data;
 167 +       }
 168 +
 169         pc->pctl_dev = devm_pinctrl_register(dev, &bcm2835_pinctrl_desc, pc);
 170         if (IS_ERR(pc->pctl_dev)) {
 171                 gpiochip_remove(&pc->gpio_chip);
 172 @@ -1087,11 +1187,6 @@ static int bcm2835_pinctrl_probe(struct
 173         return 0;
 174  }
 175
 176 -static const struct of_device_id bcm2835_pinctrl_match[] = {
 177 -       { .compatible = "brcm,bcm2835-gpio" },
 178 -       {}
 179 -};
 180 -
 181  static struct platform_driver bcm2835_pinctrl_driver = {
 182         .probe = bcm2835_pinctrl_probe,
 183         .driver = {