git.openwrt.org Git - openwrt/staging/wigyori.git/blob

   1 From 3b00a07c2443745d62babfe08dbb2ad8e649526e Mon Sep 17 00:00:00 2001
   2 From: Ansuel Smith <ansuelsmth@gmail.com>
   3 Date: Fri, 19 Nov 2021 03:03:49 +0100
   4 Subject: [PATCH] net: dsa: qca8k: fix internal delay applied to the wrong PAD
   5  config
   6
   7 With SGMII phy the internal delay is always applied to the PAD0 config.
   8 This is caused by the falling edge configuration that hardcode the reg
   9 to PAD0 (as the falling edge bits are present only in PAD0 reg)
  10 Move the delay configuration before the reg overwrite to correctly apply
  11 the delay.
  12
  13 Fixes: cef08115846e ("net: dsa: qca8k: set internal delay also for sgmii")
  14 Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
  15 Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
  16 Signed-off-by: David S. Miller <davem@davemloft.net>
  17 ---
  18  drivers/net/dsa/qca8k.c | 12 ++++++------
  19  1 file changed, 6 insertions(+), 6 deletions(-)
  20
  21 --- a/drivers/net/dsa/qca8k.c
  22 +++ b/drivers/net/dsa/qca8k.c
  23 @@ -1433,6 +1433,12 @@ qca8k_phylink_mac_config(struct dsa_swit
  24
  25                 qca8k_write(priv, QCA8K_REG_SGMII_CTRL, val);
  26
  27 +               /* From original code is reported port instability as SGMII also
  28 +                * require delay set. Apply advised values here or take them from DT.
  29 +                */
  30 +               if (state->interface == PHY_INTERFACE_MODE_SGMII)
  31 +                       qca8k_mac_config_setup_internal_delay(priv, cpu_port_index, reg);
  32 +
  33                 /* For qca8327/qca8328/qca8334/qca8338 sgmii is unique and
  34                  * falling edge is set writing in the PORT0 PAD reg
  35                  */
  36 @@ -1455,12 +1461,6 @@ qca8k_phylink_mac_config(struct dsa_swit
  37                                         QCA8K_PORT0_PAD_SGMII_TXCLK_FALLING_EDGE,
  38                                         val);
  39
  40 -               /* From original code is reported port instability as SGMII also
  41 -                * require delay set. Apply advised values here or take them from DT.
  42 -                */
  43 -               if (state->interface == PHY_INTERFACE_MODE_SGMII)
  44 -                       qca8k_mac_config_setup_internal_delay(priv, cpu_port_index, reg);
  45 -
  46                 break;
  47         default:
  48                 dev_err(ds->dev, "xMII mode %s not supported for port %d\n",