git.openwrt.org Git - openwrt/staging/xback.git/blob

   1 From 03e96644d7a810916fc4997d572577e876908b18 Mon Sep 17 00:00:00 2001
   2 From: =?UTF-8?q?Ren=C3=A9=20Kjellerup?= <rk.katana.steel@gmail.com>
   3 Date: Mon, 1 Oct 2018 15:07:16 -0700
   4 Subject: [PATCH] ARM: dts: BCM5301X: Add basic DT for Linksys EA6500 V2
   5
   6 It is wireless home router based on BCM4708A0 with BCM4360 + BCM4331
   7 wireless chipsets. The BCM4331 5GHz chip currently isn't supported only
   8 due to missing compatible firmware.
   9
  10 Signed-off-by: Rene Kjellerup <rk.katana.steel@gmail.com>
  11 Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
  12 ---
  13  arch/arm/boot/dts/Makefile                      |  1 +
  14  arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts | 45 +++++++++++++++++++++++++
  15  2 files changed, 46 insertions(+)
  16  create mode 100644 arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts
  17
  18 --- a/arch/arm/boot/dts/Makefile
  19 +++ b/arch/arm/boot/dts/Makefile
  20 @@ -82,6 +82,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
  21         bcm4708-asus-rt-ac68u.dtb \
  22         bcm4708-buffalo-wzr-1750dhp.dtb \
  23         bcm4708-linksys-ea6300-v1.dtb \
  24 +       bcm4708-linksys-ea6500-v2.dtb \
  25         bcm4708-luxul-xap-1510.dtb \
  26         bcm4708-luxul-xwc-1000.dtb \
  27         bcm4708-netgear-r6250.dtb \
  28 --- /dev/null
  29 +++ b/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts
  30 @@ -0,0 +1,45 @@
  31 +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
  32 +/*
  33 + * Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl>
  34 + * Copyright (C) 2018 Rene Kjellerup <rk.katana.steel@gmail.com>
  35 + */
  36 +
  37 +/dts-v1/;
  38 +
  39 +#include "bcm4708.dtsi"
  40 +#include "bcm5301x-nand-cs0-bch8.dtsi"
  41 +
  42 +/ {
  43 +       compatible = "linksys,ea6500-v2", "brcm,bcm4708";
  44 +       model = "Linksys EA6500 V2";
  45 +
  46 +       chosen {
  47 +               bootargs = "console=ttyS0,115200";
  48 +       };
  49 +
  50 +       memory {
  51 +               reg = <0x00000000 0x08000000>;
  52 +       };
  53 +
  54 +       gpio-keys {
  55 +               compatible = "gpio-keys";
  56 +               #address-cells = <1>;
  57 +               #size-cells = <0>;
  58 +
  59 +               wps {
  60 +                       label = "WPS";
  61 +                       linux,code = <KEY_WPS_BUTTON>;
  62 +                       gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
  63 +               };
  64 +
  65 +               restart {
  66 +                       label = "Reset";
  67 +                       linux,code = <KEY_RESTART>;
  68 +                       gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
  69 +               };
  70 +       };
  71 +};
  72 +
  73 +&usb3_phy {
  74 +       status = "okay";
  75 +};