git.openwrt.org Git - openwrt/staging/blogic.git/blob

   1 From bd9a01e28e5d1632528e531480b42d6e2c861d88 Mon Sep 17 00:00:00 2001
   2 From: Vivek Unune <npcomplete13@gmail.com>
   3 Date: Sun, 1 Nov 2020 15:08:03 -0500
   4 Subject: [PATCH] ARM: dts: BCM5301X: Linksys EA9500 add fixed partitions
   5
   6 This router has dual paritions to store trx firmware image and
   7 dual partitions for nvram. The second one in each of these cases acts
   8 as a backup store.
   9
  10 When tested with OpenWrt, the default partition parser causes two issues:
  11
  12 1. It labels both nvram partitions as nvram. In factory, second one is
  13 labeled devinfo.
  14 2. It parses second trx image and tries to create second 'linux' partition
  15 and fails with - cannot create duplicate 'linux' partition
  16
  17 The following patch works around both of these issues.
  18
  19 Signed-off-by: Vivek Unune <npcomplete13@gmail.com>
  20 Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
  21 ---
  22  .../boot/dts/bcm47094-linksys-panamera.dts    | 41 +++++++++++++++++++
  23  1 file changed, 41 insertions(+)
  24
  25 --- a/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
  26 +++ b/arch/arm/boot/dts/bcm47094-linksys-panamera.dts
  27 @@ -292,3 +292,44 @@
  28  &usb3_phy {
  29         status = "okay";
  30  };
  31 +
  32 +&nandcs {
  33 +       partitions {
  34 +               compatible = "fixed-partitions";
  35 +               #address-cells = <1>;
  36 +               #size-cells = <1>;
  37 +
  38 +               partition@0 {
  39 +                       label = "boot";
  40 +                       reg = <0x0000000 0x0080000>;
  41 +                       read-only;
  42 +               };
  43 +
  44 +               partition@80000 {
  45 +                       label = "nvram";
  46 +                       reg = <0x080000 0x0100000>;
  47 +               };
  48 +
  49 +               partition@180000{
  50 +                       label = "devinfo";
  51 +                       reg = <0x0180000 0x080000>;
  52 +               };
  53 +
  54 +               partition@200000 {
  55 +                       label = "firmware";
  56 +                       reg = <0x0200000 0x01D00000>;
  57 +                       compatible = "brcm,trx";
  58 +               };
  59 +
  60 +               partition@1F00000 {
  61 +                       label = "failsafe";
  62 +                       reg = <0x01F00000 0x01D00000>;
  63 +                       read-only;
  64 +               };
  65 +
  66 +               partition@5200000 {
  67 +                       label = "system";
  68 +                       reg = <0x05200000 0x02E00000>;
  69 +               };
  70 +       };
  71 +};