projects / openwrt / openwrt.git / blob
? search:


a763e057249a3a2e6e252db0c87cfdc2f1753736
[openwrt/openwrt.git] /
1 From 9d8de47b617baa4fa92d9a1502904c0373f80384 Mon Sep 17 00:00:00 2001
2 From: Li Yang <leoyang.li@nxp.com>
3 Date: Thu, 2 May 2019 16:12:40 -0500
4 Subject: [PATCH] arm64: dts: ls208xa: accumulated change to ls208xa boards
5
6 commit 46123df3a174f0d76c8b954a0386e64841453836
7 Author: Florinel Iordache <florinel.iordache@nxp.com>
8 Date: Thu Aug 9 12:29:18 2018 +0300
9
10 arm64: dts: updates for Unified Backplane driver
11
12 Signed-off-by: Florinel Iordache <florinel.iordache@nxp.com>
13
14 commit 76a741dbb9b93ea9ab2f6122b8df5bc4f0db7676
15 Author: Nipun Gupta <nipun.gupta@nxp.com>
16 Date: Sat Apr 28 00:20:16 2018 +0530
17
18 arm64: dts: ls208x: add dma-cohernet property in fsl-mc node
19
20 Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
21
22 commit f6309e9dc8e0c6171a43fd6759123b5de1c574aa
23 Author: Zhang Ying-22455 <ying.zhang22455@nxp.com>
24 Date: Mon Apr 2 16:27:23 2018 +0800
25
26 arm64: dts: ls208xa: add dts entry for A-010650
27
28 Signed-off-by: Zhang Ying-22455 <ying.zhang22455@nxp.com>
29
30 commit 8c37bad2038a210a4f0a369fd946aaae4317eac4
31 Author: Nipun Gupta <nipun.gupta@nxp.com>
32 Date: Fri Apr 20 17:14:10 2018 +0530
33
34 arm64: dts: ls208x: add dma ranges property
35
36 Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
37
38 commit 38566bbd5ca6747b30d2f0c251bbcfe0723df8c6
39 Author: Changming Huang <jerry.huang@nxp.com>
40 Date: Wed Apr 19 12:49:50 2017 +0800
41
42 arm/arm64: dts: Add property snps incr burst type adjustment for
43 INCR burst type for dwc3
44
45 Signed-off-by: yinbo.zhu <yinbo.zhu@nxp.com>
46 Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
47
48 commit dbb65ea8ee1d46067e756c6d64c7fe66a0058f49
49 Author: Pankaj Bansal <pankaj.bansal@nxp.com>
50 Date: Mon Mar 5 12:37:04 2018 +0530
51
52 arm64: dts: ls208x: remove NXP Erratum A008585 from LS2088A.
53
54 NXP Erratum A008585 affects A57 core cluster used in LS2085rev1.
55 However this problem has been fixed in A72 core cluster used in
56 LS2088.
57 Therefore remove the erratum from LS2088A. Keeping it only in
58 LS2085.
59
60 Cc: <stable@vger.kernel.org> # 4.14
61 Signed-off-by: Pankaj Bansal <pankaj.bansal@nxp.com>
62 Reviewed-by: Sandeep Malik <sandeep.malik@nxp.com>
63 Acked-by: Priyanka Jain <priyanka.jain@nxp.com>
64
65 commit 85f41b0f6abe6b9d7d303790bb3712ed559890e9
66 Author: Nipun Gupta <nipun.gupta@nxp.com>
67 Date: Mon Feb 26 10:39:54 2018 +0530
68
69 arm64: dts: ls208xa: add dma coherent property in smmu node
70
71 Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
72
73 commit e910d8b78b823a625451b1da7ae7499dadde2ae9
74 Author: Suresh Gupta <suresh.gupta@nxp.com>
75 Date: Thu Feb 1 23:49:56 2018 +0530
76
77 arm64: dts: freescale: ls208xa: Modify DT nodes for qspi
78
79 Signed-off-by: Abhimanyu Saini <abhimanyu.saini@nxp.com>
80
81 commit 7654ef78c8c85de3a43dfa0dffd572d589ea1332
82 Author: Zhang Ying-22455 <ying.zhang22455@nxp.com>
83 Date: Wed Nov 1 10:34:04 2017 +0800
84
85 arm64: dts: ls208xa: correct the i2c clock to 1/2 platform pll
86
87 Signed-off-by: Zhang Ying-22455 <ying.zhang22455@nxp.com>
88
89 commit efdb129228baa6a999c06072338b979d783d7b60
90 Author: Bharat Bhushan <Bharat.Bhushan@nxp.com>
91 Date: Thu Aug 31 14:45:02 2017 +0530
92
93 arm64: dts: ls208xa: Add iommu-map property for pci
94
95 This patch adds iommu-map property for PCIe, which enables
96 SMMU for these devices on LS208xA devices.
97
98 Signed-off-by: Bharat Bhushan <Bharat.Bhushan@nxp.com>
99
100 commit 45af5d025eafaf4a85000e16e5f47992de663ff6
101 Author: Iordache Florinel-R70177 <florinel.iordache@nxp.com>
102 Date: Mon Aug 21 11:46:59 2017 +0300
103
104 arm64: dts: ls2088a: update backplane support with dpmac connections
105
106 Signed-off-by: Iordache Florinel-R70177 <florinel.iordache@nxp.com>
107
108 commit b2ede6c088a883fceb348e8659253b2c7cdeeff8
109 Author: Santan Kumar <santan.kumar@nxp.com>
110 Date: Thu Jun 22 13:04:00 2017 +0530
111
112 arm64: dts: ls2088ardb: Update nodes for QSPI
113
114 -As per board design, different QSPI flash is connected on
115 boards, hence change QSPI flash node from s25fl256s1 to s25fs512ss
116 in
117 device tree.
118 -Enable fast-read support in QSPI node.
119
120 Signed-off-by: Santan Kumar <santan.kumar@nxp.com>
121
122 commit d5324a75c56e9f9210113e51cffa846a86b50fbd
123 Author: Santan Kumar <santan.kumar@nxp.com>
124 Date: Mon Jun 19 15:26:03 2017 +0530
125
126 arm64: dts: ls2081ardb: Update nodes for QSPI, SATA, INA220
127
128 Update ls2081ardb.dts for below nodes:
129 -As per updated board design, different QSPI flash is connected on
130 boards, hence change QSPI flash node from n25q512a to s25fs512ss
131 in
132 device tree.
133 -Enable dual flash support in QSPI node.
134 -Add DTS node for INA220.
135 -Enable SATA node.
136
137 Signed-off-by: Santan Kumar <santan.kumar@nxp.com>
138 Signed-off-by: Tao Yang <b31903@freescale.com>
139 Signed-off-by: Yogesh Gaur <yogeshnarayan.gaur@nxp.com>
140
141 commit 43d506fa19e1e50e4c2e4f9689ad3c60d9a06d71
142 Author: Zhang Ying-22455 <ying.zhang22455@nxp.com>
143 Date: Thu May 11 08:42:19 2017 +0800
144
145 arm64: dts: ls208x: add property for PCA954x Mux device
146
147 PCA954x Mux device should never be turned-off after power-on. if
148 device tree contians "i2c-mux-never-disable" property for pca954x
149 device node, it can ensure that skip disabling PCA954x Mux device.
150
151 Signed-off-by: Zhang Ying-22455 <ying.zhang22455@nxp.com>
152
153 commit 6d3a96446a7ffccb0b9936b616d855c8d5572bce
154 Author: Bogdan Purcareata <bogdan.purcareata@nxp.com>
155 Date: Wed May 3 14:26:35 2017 +0000
156
157 arm64: dts: fsl/ls1088,ls208x: Add mdio and phy nodes
158
159 Add mdio and phy nodes for the following FSL platforms:
160 - LS1088A RDB
161 - LS2080A QDS & RDB
162 - LS2088A QDS, RDB & simu
163
164 Contains contributions from patches by the following authors:
165 Signed-off-by: Shaohui Xie <Shaohui.Xie@nxp.com>
166 Signed-off-by: Rai Harninder <harninder.rai@nxp.com>
167 Signed-off-by: Pratiyush Mohan Srivastava
168 <pratiyush.srivastava@nxp.com>
169 Signed-off-by: Raghav Dogra <raghav.dogra@nxp.com>
170 Signed-off-by: Santan Kumar <santan.kumar@nxp.com>
171 Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
172 Signed-off-by: Ashish Kumar <ashish.kumar@nxp.com>
173 Signed-off-by: Abhimanyu Saini <abhimanyu.saini@nxp.com>
174 Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
175 Signed-off-by: Bogdan Purcareata <bogdan.purcareata@nxp.com>
176
177 commit 0443625ea24bc4ea315c30b718712254c588bd18
178 Author: Suresh Gupta <suresh.gupta@nxp.com>
179 Date: Fri May 5 13:54:22 2017 +0530
180
181 arm64: dts: ls208xa: Add QSPI Flash node for RDB
182
183 This is temporary patch, will rewrite for open source
184
185 Signed-off-by: Suresh Gupta <suresh.gupta@nxp.com>
186
187 commit ed0ce1d49aa72d12ea54f82d3771a377c68af37e
188 Author: Priyanka Jain <priyanka.jain@nxp.com>
189 Date: Thu Apr 13 16:49:40 2017 +0530
190
191 arm64: dts: ls2081ardb: Add DTS support for NXP LS2081ARDB
192
193 This patch add support for NXP LS2081ARDB board which has
194 LS2081A SoC.
195
196 LS2081A SoC is 40-pin derivative of LS2088A SoC
197 So, from functional perspective both are same.
198 Hence,ls2088a SoC dtsi files are included from ls2081ARDB dts
199
200 Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
201
202 commit e4fb842554a5e7b8c3f6e3c243222dbe4515aee3
203 Author: Zhang Ying-22455 <ying.zhang22455@nxp.com>
204 Date: Thu Apr 27 15:01:54 2017 +0800
205
206 arm64: dts: ls208xa: add ftm0 nodes
207
208 Signed-off-by: Zhang Ying-22455 <ying.zhang22455@nxp.com>
209
210 commit 64c3e2c3a7ddc89c3c23c012ee364f2c014524d2
211 Author: costi <constantin.tudor@freescale.com>
212 Date: Fri Mar 3 18:08:28 2017 +0200
213
214 arm64: dts: fsl-ls2088: Add mdio/phy devices
215
216 Signed-off-by: Constantin Tudor <constantin.tudor@nxp.com>
217
218 commit 3bcdc4de0a1c9e6f4a4ddc916e8efe8044d8bbfd
219 Author: Po Liu <po.liu@nxp.com>
220 Date: Fri Sep 30 17:11:36 2016 +0800
221
222 arm64: dts: ls1043/ls2080: add pcie aer/pme interrupt-name property
223
224 Some platforms(NXP Layerscape for example) aer/pme interrupts was
225 not
226 MSI/MSI-X/INTx but using interrupt line independently. This patch
227 add "aer", "pme" interrupt-names for aer/pme interrupt.
228
229 With the interrupt-names "aer", "pme" code could probe aer/pme
230 interrupt
231 line for pcie root port, replace the aer/pme interrupt service irqs.
232
233 This is intend to fixup the Layerscape platforms which aer/pmes
234 interrupts
235 was not MSI/MSI-X/INTx, but using interrupt line independently.
236
237 Since the interrupt-names "intr" never been used. Remove it.
238
239 Signed-off-by: Po Liu <po.liu@nxp.com>
240 Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
241
242 commit 64d859836d3d194e8bc926bb951fd21859689824
243 Author: Nipun Gupta <nipun.gupta@nxp.com>
244 Date: Mon Dec 5 05:20:51 2016 +0530
245
246 arm64: dts: ls208xa: Comply with the new iommu binding for fsl_mc
247
248 fsl-mc bus support the new iommu-map property. Comply to this
249 binding
250 for fsl_mc bus.
251
252 Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
253 ---
254 arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts | 62 +++++++++
255 arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts | 80 +++++++++++
256 arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi | 12 ++
257 arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dts | 120 ++++++++++++++++
258 arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts | 80 +++++++++++
259 arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi | 1 +
260 arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi | 11 +-
261 arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi | 155 +++++++++++++++++++--
262 8 files changed, 505 insertions(+), 16 deletions(-)
263
264 --- a/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts
265 +++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts
266 @@ -23,3 +23,65 @@
267 stdout-path = "serial0:115200n8";
268 };
269 };
270 +
271 +&ifc {
272 + boardctrl: board-control@3,0 {
273 + #address-cells = <1>;
274 + #size-cells = <1>;
275 + compatible = "fsl,tetra-fpga", "fsl,fpga-qixis", "simple-bus";
276 + reg = <3 0 0x300>; /* TODO check address */
277 + ranges = <0 3 0 0x300>;
278 +
279 + mdio_mux_emi1 {
280 + compatible = "mdio-mux-mmioreg", "mdio-mux";
281 + mdio-parent-bus = <&emdio1>;
282 + reg = <0x54 1>; /* BRDCFG4 */
283 + mux-mask = <0xe0>; /* EMI1_MDIO */
284 +
285 + #address-cells=<1>;
286 + #size-cells = <0>;
287 +
288 + /* Child MDIO buses, one for each riser card:
289 + * reg = 0x0, 0x20, 0x40, 0x60, 0x80, 0xa0.
290 + * VSC8234 PHYs on the riser cards.
291 + */
292 +
293 + mdio_mux3: mdio@60 {
294 + reg = <0x60>;
295 + #address-cells = <1>;
296 + #size-cells = <0>;
297 +
298 + mdio0_phy12: mdio_phy0@1c {
299 + reg = <0x1c>;
300 + phy-connection-type = "sgmii";
301 + };
302 + mdio0_phy13: mdio_phy1@1d {
303 + reg = <0x1d>;
304 + phy-connection-type = "sgmii";
305 + };
306 + mdio0_phy14: mdio_phy2@1e {
307 + reg = <0x1e>;
308 + phy-connection-type = "sgmii";
309 + };
310 + mdio0_phy15: mdio_phy3@1f {
311 + reg = <0x1f>;
312 + phy-connection-type = "sgmii";
313 + };
314 + };
315 + };
316 + };
317 +};
318 +
319 +/* Update DPMAC connections to external PHYs, under SerDes 0x2a_0x49. */
320 +&dpmac9 {
321 + phy-handle = <&mdio0_phy12>;
322 +};
323 +&dpmac10 {
324 + phy-handle = <&mdio0_phy13>;
325 +};
326 +&dpmac11 {
327 + phy-handle = <&mdio0_phy14>;
328 +};
329 +&dpmac12 {
330 + phy-handle = <&mdio0_phy15>;
331 +};
332 --- a/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts
333 +++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts
334 @@ -23,3 +23,83 @@
335 stdout-path = "serial1:115200n8";
336 };
337 };
338 +
339 +&emdio1 {
340 + status = "disabled";
341 + /* CS4340 PHYs */
342 + mdio1_phy1: emdio1_phy@1 {
343 + reg = <0x10>;
344 + phy-connection-type = "xfi";
345 + };
346 + mdio1_phy2: emdio1_phy@2 {
347 + reg = <0x11>;
348 + phy-connection-type = "xfi";
349 + };
350 + mdio1_phy3: emdio1_phy@3 {
351 + reg = <0x12>;
352 + phy-connection-type = "xfi";
353 + };
354 + mdio1_phy4: emdio1_phy@4 {
355 + reg = <0x13>;
356 + phy-connection-type = "xfi";
357 + };
358 +};
359 +
360 +&emdio2 {
361 + /* AQR405 PHYs */
362 + mdio2_phy1: emdio2_phy@1 {
363 + compatible = "ethernet-phy-ieee802.3-c45";
364 + interrupts = <0 1 0x4>; /* Level high type */
365 + reg = <0x0>;
366 + phy-connection-type = "xfi";
367 + };
368 + mdio2_phy2: emdio2_phy@2 {
369 + compatible = "ethernet-phy-ieee802.3-c45";
370 + interrupts = <0 2 0x4>; /* Level high type */
371 + reg = <0x1>;
372 + phy-connection-type = "xfi";
373 + };
374 + mdio2_phy3: emdio2_phy@3 {
375 + compatible = "ethernet-phy-ieee802.3-c45";
376 + interrupts = <0 4 0x4>; /* Level high type */
377 + reg = <0x2>;
378 + phy-connection-type = "xfi";
379 + };
380 + mdio2_phy4: emdio2_phy@4 {
381 + compatible = "ethernet-phy-ieee802.3-c45";
382 + interrupts = <0 5 0x4>; /* Level high type */
383 + reg = <0x3>;
384 + phy-connection-type = "xfi";
385 + };
386 +};
387 +
388 +/* Update DPMAC connections to external PHYs, under the assumption of
389 + * SerDes 0x2a_0x41. This is currently the only SerDes supported on the board.
390 + */
391 +/* Leave Cortina nodes commented out until driver is integrated
392 + *&dpmac1 {
393 + * phy-handle = <&mdio1_phy1>;
394 + *};
395 + *&dpmac2 {
396 + * phy-handle = <&mdio1_phy2>;
397 + *};
398 + *&dpmac3 {
399 + * phy-handle = <&mdio1_phy3>;
400 + *};
401 + *&dpmac4 {
402 + * phy-handle = <&mdio1_phy4>;
403 + *};
404 + */
405 +
406 +&dpmac5 {
407 + phy-handle = <&mdio2_phy1>;
408 +};
409 +&dpmac6 {
410 + phy-handle = <&mdio2_phy2>;
411 +};
412 +&dpmac7 {
413 + phy-handle = <&mdio2_phy3>;
414 +};
415 +&dpmac8 {
416 + phy-handle = <&mdio2_phy4>;
417 +};
418 --- a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
419 +++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
420 @@ -118,6 +118,18 @@
421 };
422 };
423
424 +&timer {
425 + fsl,erratum-a008585;
426 +};
427 +
428 +&usb0 {
429 + snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
430 +};
431 +
432 +&usb1 {
433 + snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
434 +};
435 +
436 &pcie1 {
437 reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */
438 0x10 0x00000000 0x0 0x00002000>; /* configuration space */
439 --- a/arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dts
440 +++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dts
441 @@ -22,3 +22,123 @@
442 stdout-path = "serial0:115200n8";
443 };
444 };
445 +
446 +&ifc {
447 + boardctrl: board-control@3,0 {
448 + #address-cells = <1>;
449 + #size-cells = <1>;
450 + compatible = "fsl,tetra-fpga", "fsl,fpga-qixis", "simple-bus";
451 + reg = <3 0 0x300>; /* TODO check address */
452 + ranges = <0 3 0 0x300>;
453 +
454 + mdio_mux_emi1 {
455 + compatible = "mdio-mux-mmioreg", "mdio-mux";
456 + mdio-parent-bus = <&emdio1>;
457 + reg = <0x54 1>; /* BRDCFG4 */
458 + mux-mask = <0xe0>; /* EMI1_MDIO */
459 +
460 + #address-cells=<1>;
461 + #size-cells = <0>;
462 +
463 + /* Child MDIO buses, one for each riser card:
464 + * reg = 0x0, 0x20, 0x40, 0x60, 0x80, 0xa0.
465 + * VSC8234 PHYs on the riser cards.
466 + */
467 +
468 + mdio_mux3: mdio@60 {
469 + reg = <0x60>;
470 + #address-cells = <1>;
471 + #size-cells = <0>;
472 +
473 + mdio0_phy12: mdio_phy0@1c {
474 + reg = <0x1c>;
475 + phy-connection-type = "sgmii";
476 + };
477 + mdio0_phy13: mdio_phy1@1d {
478 + reg = <0x1d>;
479 + phy-connection-type = "sgmii";
480 + };
481 + mdio0_phy14: mdio_phy2@1e {
482 + reg = <0x1e>;
483 + phy-connection-type = "sgmii";
484 + };
485 + mdio0_phy15: mdio_phy3@1f {
486 + reg = <0x1f>;
487 + phy-connection-type = "sgmii";
488 + };
489 + };
490 + };
491 + };
492 +};
493 +
494 +&pcs_mdio1 {
495 + pcs_phy1: ethernet-phy@0 {
496 + backplane-mode = "10gbase-kr";
497 + compatible = "ethernet-phy-ieee802.3-c45";
498 + reg = <0x0>;
499 + fsl,lane-handle = <&serdes1>;
500 + fsl,lane-reg = <0x9C0 0x40>;/* lane H */
501 + };
502 +};
503 +
504 +&pcs_mdio2 {
505 + pcs_phy2: ethernet-phy@0 {
506 + backplane-mode = "10gbase-kr";
507 + compatible = "ethernet-phy-ieee802.3-c45";
508 + reg = <0x0>;
509 + fsl,lane-handle = <&serdes1>;
510 + fsl,lane-reg = <0x980 0x40>;/* lane G */
511 + };
512 +};
513 +
514 +&pcs_mdio3 {
515 + pcs_phy3: ethernet-phy@0 {
516 + backplane-mode = "10gbase-kr";
517 + compatible = "ethernet-phy-ieee802.3-c45";
518 + reg = <0x0>;
519 + fsl,lane-handle = <&serdes1>;
520 + fsl,lane-reg = <0x940 0x40>;/* lane F */
521 + };
522 +};
523 +
524 +&pcs_mdio4 {
525 + pcs_phy4: ethernet-phy@0 {
526 + backplane-mode = "10gbase-kr";
527 + compatible = "ethernet-phy-ieee802.3-c45";
528 + reg = <0x0>;
529 + fsl,lane-handle = <&serdes1>;
530 + fsl,lane-reg = <0x900 0x40>;/* lane E */
531 + };
532 +};
533 +
534 +/* Update DPMAC connections to backplane PHYs, under SerDes 0x2a_0xXX.
535 + * &dpmac1 {
536 + * phy-handle = <&pcs_phy1>;
537 + * };
538 + *
539 + * &dpmac2 {
540 + * phy-handle = <&pcs_phy2>;
541 + * };
542 + *
543 + * &dpmac3 {
544 + * phy-handle = <&pcs_phy3>;
545 + * };
546 + *
547 + * &dpmac4 {
548 + * phy-handle = <&pcs_phy4>;
549 + * };
550 + */
551 +
552 +/* Update DPMAC connections to external PHYs, under SerDes 0x2a_0x49. */
553 +&dpmac9 {
554 + phy-handle = <&mdio0_phy12>;
555 +};
556 +&dpmac10 {
557 + phy-handle = <&mdio0_phy13>;
558 +};
559 +&dpmac11 {
560 + phy-handle = <&mdio0_phy14>;
561 +};
562 +&dpmac12 {
563 + phy-handle = <&mdio0_phy15>;
564 +};
565 --- a/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts
566 +++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts
567 @@ -22,3 +22,83 @@
568 stdout-path = "serial1:115200n8";
569 };
570 };
571 +
572 +&emdio1 {
573 + status = "disabled";
574 + /* CS4340 PHYs */
575 + mdio1_phy1: emdio1_phy@1 {
576 + reg = <0x10>;
577 + phy-connection-type = "xfi";
578 + };
579 + mdio1_phy2: emdio1_phy@2 {
580 + reg = <0x11>;
581 + phy-connection-type = "xfi";
582 + };
583 + mdio1_phy3: emdio1_phy@3 {
584 + reg = <0x12>;
585 + phy-connection-type = "xfi";
586 + };
587 + mdio1_phy4: emdio1_phy@4 {
588 + reg = <0x13>;
589 + phy-connection-type = "xfi";
590 + };
591 +};
592 +
593 +&emdio2 {
594 + /* AQR405 PHYs */
595 + mdio2_phy1: emdio2_phy@1 {
596 + compatible = "ethernet-phy-ieee802.3-c45";
597 + interrupts = <0 1 0x4>; /* Level high type */
598 + reg = <0x0>;
599 + phy-connection-type = "xfi";
600 + };
601 + mdio2_phy2: emdio2_phy@2 {
602 + compatible = "ethernet-phy-ieee802.3-c45";
603 + interrupts = <0 2 0x4>; /* Level high type */
604 + reg = <0x1>;
605 + phy-connection-type = "xfi";
606 + };
607 + mdio2_phy3: emdio2_phy@3 {
608 + compatible = "ethernet-phy-ieee802.3-c45";
609 + interrupts = <0 4 0x4>; /* Level high type */
610 + reg = <0x2>;
611 + phy-connection-type = "xfi";
612 + };
613 + mdio2_phy4: emdio2_phy@4 {
614 + compatible = "ethernet-phy-ieee802.3-c45";
615 + interrupts = <0 5 0x4>; /* Level high type */
616 + reg = <0x3>;
617 + phy-connection-type = "xfi";
618 + };
619 +};
620 +
621 +/* Update DPMAC connections to external PHYs, under the assumption of
622 + * SerDes 0x2a_0x41. This is currently the only SerDes supported on the board.
623 + */
624 +/* Leave Cortina PHYs commented out until proper driver is integrated
625 + *&dpmac1 {
626 + * phy-handle = <&mdio1_phy1>;
627 + *};
628 + *&dpmac2 {
629 + * phy-handle = <&mdio1_phy2>;
630 + *};
631 + *&dpmac3 {
632 + * phy-handle = <&mdio1_phy3>;
633 + *};
634 + *&dpmac4 {
635 + * phy-handle = <&mdio1_phy4>;
636 + *};
637 + */
638 +
639 +&dpmac5 {
640 + phy-handle = <&mdio2_phy1>;
641 +};
642 +&dpmac6 {
643 + phy-handle = <&mdio2_phy2>;
644 +};
645 +&dpmac7 {
646 + phy-handle = <&mdio2_phy3>;
647 +};
648 +&dpmac8 {
649 + phy-handle = <&mdio2_phy4>;
650 +};
651 --- a/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi
652 +++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi
653 @@ -129,6 +129,7 @@
654
655 &qspi {
656 status = "okay";
657 + fsl,qspi-has-second-chip;
658 flash0: s25fl256s1@0 {
659 #address-cells = <1>;
660 #size-cells = <1>;
661 --- a/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi
662 +++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi
663 @@ -49,6 +49,7 @@
664 reg = <0x75>;
665 #address-cells = <1>;
666 #size-cells = <0>;
667 + i2c-mux-never-disable;
668 i2c@1 {
669 #address-cells = <1>;
670 #size-cells = <0>;
671 @@ -108,7 +109,15 @@
672 };
673
674 &qspi {
675 - status = "disabled";
676 + status = "okay";
677 + flash0: s25fs512s@0 {
678 + #address-cells = <1>;
679 + #size-cells = <1>;
680 + compatible = "spansion,m25p80";
681 + m25p,fast-read;
682 + spi-max-frequency = <20000000>;
683 + reg = <0>;
684 + };
685 };
686
687 &sata0 {
688 --- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
689 +++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
690 @@ -114,13 +114,12 @@
691 };
692 };
693
694 - timer {
695 + timer: timer {
696 compatible = "arm,armv8-timer";
697 interrupts = <1 13 4>, /* Physical Secure PPI, active-low */
698 <1 14 4>, /* Physical Non-Secure PPI, active-low */
699 <1 11 4>, /* Virtual PPI, active-low */
700 <1 10 4>; /* Hypervisor PPI, active-low */
701 - fsl,erratum-a008585;
702 };
703
704 pmu {
705 @@ -559,15 +558,126 @@
706 #interrupt-cells = <2>;
707 };
708
709 + /* TODO: WRIOP (CCSR?) */
710 + emdio1: mdio@0x8B96000 { /* WRIOP0: 0x8B8_0000,
711 + * E-MDIO1: 0x1_6000
712 + */
713 + compatible = "fsl,fman-memac-mdio";
714 + reg = <0x0 0x8B96000 0x0 0x1000>;
715 + device_type = "mdio"; /* TODO: is this necessary? */
716 + little-endian; /* force the driver in LE mode */
717 +
718 + /* Not necessary on the QDS, but needed on the RDB */
719 + #address-cells = <1>;
720 + #size-cells = <0>;
721 + };
722 +
723 + emdio2: mdio@0x8B97000 { /* WRIOP0: 0x8B8_0000,
724 + * E-MDIO2: 0x1_7000
725 + */
726 + compatible = "fsl,fman-memac-mdio";
727 + reg = <0x0 0x8B97000 0x0 0x1000>;
728 + device_type = "mdio"; /* TODO: is this necessary? */
729 + little-endian; /* force the driver in LE mode */
730 +
731 + #address-cells = <1>;
732 + #size-cells = <0>;
733 + };
734 +
735 + pcs_mdio1: mdio@0x8c07000 {
736 + compatible = "fsl,fman-memac-mdio";
737 + reg = <0x0 0x8c07000 0x0 0x1000>;
738 + device_type = "mdio";
739 + little-endian;
740 +
741 + #address-cells = <1>;
742 + #size-cells = <0>;
743 + };
744 +
745 + pcs_mdio2: mdio@0x8c0b000 {
746 + compatible = "fsl,fman-memac-mdio";
747 + reg = <0x0 0x8c0b000 0x0 0x1000>;
748 + device_type = "mdio";
749 + little-endian;
750 +
751 + #address-cells = <1>;
752 + #size-cells = <0>;
753 + };
754 +
755 + pcs_mdio3: mdio@0x8c0f000 {
756 + compatible = "fsl,fman-memac-mdio";
757 + reg = <0x0 0x8c0f000 0x0 0x1000>;
758 + device_type = "mdio";
759 + little-endian;
760 +
761 + #address-cells = <1>;
762 + #size-cells = <0>;
763 + };
764 +
765 + pcs_mdio4: mdio@0x8c13000 {
766 + compatible = "fsl,fman-memac-mdio";
767 + reg = <0x0 0x8c13000 0x0 0x1000>;
768 + device_type = "mdio";
769 + little-endian;
770 +
771 + #address-cells = <1>;
772 + #size-cells = <0>;
773 + };
774 +
775 + pcs_mdio5: mdio@0x8c17000 {
776 + status = "disabled";
777 + compatible = "fsl,fman-memac-mdio";
778 + reg = <0x0 0x8c17000 0x0 0x1000>;
779 + device_type = "mdio";
780 + little-endian;
781 +
782 + #address-cells = <1>;
783 + #size-cells = <0>;
784 + };
785 +
786 + pcs_mdio6: mdio@0x8c1b000 {
787 + status = "disabled";
788 + compatible = "fsl,fman-memac-mdio";
789 + reg = <0x0 0x8c1b000 0x0 0x1000>;
790 + device_type = "mdio";
791 + little-endian;
792 +
793 + #address-cells = <1>;
794 + #size-cells = <0>;
795 + };
796 +
797 + pcs_mdio7: mdio@0x8c1f000 {
798 + status = "disabled";
799 + compatible = "fsl,fman-memac-mdio";
800 + reg = <0x0 0x8c1f000 0x0 0x1000>;
801 + device_type = "mdio";
802 + little-endian;
803 +
804 + #address-cells = <1>;
805 + #size-cells = <0>;
806 + };
807 +
808 + pcs_mdio8: mdio@0x8c23000 {
809 + status = "disabled";
810 + compatible = "fsl,fman-memac-mdio";
811 + reg = <0x0 0x8c23000 0x0 0x1000>;
812 + device_type = "mdio";
813 + little-endian;
814 +
815 + #address-cells = <1>;
816 + #size-cells = <0>;
817 + };
818 +
819 i2c0: i2c@2000000 {
820 status = "disabled";
821 - compatible = "fsl,vf610-i2c";
822 + compatible = "fsl,vf610-i2c", "fsl,ls208xa-vf610-i2c";
823 #address-cells = <1>;
824 #size-cells = <0>;
825 reg = <0x0 0x2000000 0x0 0x10000>;
826 interrupts = <0 34 0x4>; /* Level high type */
827 clock-names = "i2c";
828 - clocks = <&clockgen 4 3>;
829 + clocks = <&clockgen 4 1>;
830 + scl-gpios = <&gpio3 10 0>;
831 };
832
833 i2c1: i2c@2010000 {
834 @@ -578,7 +688,7 @@
835 reg = <0x0 0x2010000 0x0 0x10000>;
836 interrupts = <0 34 0x4>; /* Level high type */
837 clock-names = "i2c";
838 - clocks = <&clockgen 4 3>;
839 + clocks = <&clockgen 4 1>;
840 };
841
842 i2c2: i2c@2020000 {
843 @@ -589,7 +699,7 @@
844 reg = <0x0 0x2020000 0x0 0x10000>;
845 interrupts = <0 35 0x4>; /* Level high type */
846 clock-names = "i2c";
847 - clocks = <&clockgen 4 3>;
848 + clocks = <&clockgen 4 1>;
849 };
850
851 i2c3: i2c@2030000 {
852 @@ -600,7 +710,7 @@
853 reg = <0x0 0x2030000 0x0 0x10000>;
854 interrupts = <0 35 0x4>; /* Level high type */
855 clock-names = "i2c";
856 - clocks = <&clockgen 4 3>;
857 + clocks = <&clockgen 4 1>;
858 };
859
860 ifc: ifc@2240000 {
861 @@ -632,8 +742,8 @@
862 pcie1: pcie@3400000 {
863 compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie";
864 reg-names = "regs", "config";
865 - interrupts = <0 108 0x4>; /* Level high type */
866 - interrupt-names = "intr";
867 + interrupts = <0 108 0x4>; /* aer interrupt */
868 + interrupt-names = "aer";
869 #address-cells = <3>;
870 #size-cells = <2>;
871 device_type = "pci";
872 @@ -641,6 +751,7 @@
873 num-viewport = <6>;
874 bus-range = <0x0 0xff>;
875 msi-parent = <&its>;
876 + iommu-map = <0 &smmu 0 1>; /* This is fixed-up by u-boot */
877 #interrupt-cells = <1>;
878 interrupt-map-mask = <0 0 0 7>;
879 interrupt-map = <0000 0 0 1 &gic 0 0 0 109 4>,
880 @@ -653,8 +764,8 @@
881 pcie2: pcie@3500000 {
882 compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie";
883 reg-names = "regs", "config";
884 - interrupts = <0 113 0x4>; /* Level high type */
885 - interrupt-names = "intr";
886 + interrupts = <0 113 0x4>; /* aer interrupt */
887 + interrupt-names = "aer";
888 #address-cells = <3>;
889 #size-cells = <2>;
890 device_type = "pci";
891 @@ -662,6 +773,7 @@
892 num-viewport = <6>;
893 bus-range = <0x0 0xff>;
894 msi-parent = <&its>;
895 + iommu-map = <0 &smmu 0 1>; /* This is fixed-up by u-boot */
896 #interrupt-cells = <1>;
897 interrupt-map-mask = <0 0 0 7>;
898 interrupt-map = <0000 0 0 1 &gic 0 0 0 114 4>,
899 @@ -674,8 +786,8 @@
900 pcie3: pcie@3600000 {
901 compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie";
902 reg-names = "regs", "config";
903 - interrupts = <0 118 0x4>; /* Level high type */
904 - interrupt-names = "intr";
905 + interrupts = <0 118 0x4>; /* aer interrupt */
906 + interrupt-names = "aer";
907 #address-cells = <3>;
908 #size-cells = <2>;
909 device_type = "pci";
910 @@ -683,6 +795,7 @@
911 num-viewport = <256>;
912 bus-range = <0x0 0xff>;
913 msi-parent = <&its>;
914 + iommu-map = <0 &smmu 0 1>; /* This is fixed-up by u-boot */
915 #interrupt-cells = <1>;
916 interrupt-map-mask = <0 0 0 7>;
917 interrupt-map = <0000 0 0 1 &gic 0 0 0 119 4>,
918 @@ -695,8 +808,8 @@
919 pcie4: pcie@3700000 {
920 compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie";
921 reg-names = "regs", "config";
922 - interrupts = <0 123 0x4>; /* Level high type */
923 - interrupt-names = "intr";
924 + interrupts = <0 123 0x4>; /* aer interrupt */
925 + interrupt-names = "aer";
926 #address-cells = <3>;
927 #size-cells = <2>;
928 device_type = "pci";
929 @@ -704,6 +817,7 @@
930 num-viewport = <6>;
931 bus-range = <0x0 0xff>;
932 msi-parent = <&its>;
933 + iommu-map = <0 &smmu 0 1>; /* This is fixed-up by u-boot */
934 #interrupt-cells = <1>;
935 interrupt-map-mask = <0 0 0 7>;
936 interrupt-map = <0000 0 0 1 &gic 0 0 0 124 4>,
937 @@ -753,11 +867,22 @@
938 snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
939 };
940
941 + serdes1: serdes@1ea0000 {
942 + reg = <0x0 0x1ea0000 0 0x00002000>;
943 + compatible = "fsl,serdes-10g";
944 + };
945 +
946 ccn@4000000 {
947 compatible = "arm,ccn-504";
948 reg = <0x0 0x04000000 0x0 0x01000000>;
949 interrupts = <0 12 4>;
950 };
951 +
952 + ftm0: ftm0@2800000 {
953 + compatible = "fsl,ftm-alarm";
954 + reg = <0x0 0x2800000 0x0 0x10000>;
955 + interrupts = <0 44 4>;
956 + };
957 };
958
959 ddr1: memory-controller@1080000 {
OpenWrt Source Repository