git.openwrt.org Git - openwrt/staging/ansuel.git/blob

   1 From 2c7d2adefa34858208435e771690d2808eaf809d Mon Sep 17 00:00:00 2001
   2 From: James Hughes <james.hughes@raspberrypi.org>
   3 Date: Thu, 31 Oct 2019 14:39:44 +0000
   4 Subject: [PATCH] net:phy:2711 Allow ethernet LED mode to be set via
   5  device tree
   6
   7 Add device tree entries and code to allow the specification of
   8 the lighting modes for the LED's on the ethernet connector.
   9
  10 Signed-off-by: James Hughes <james.hughes@raspberrypi.org>
  11
  12 net:phy:2711 Change the default ethernet LED actions
  13
  14 This should return default behaviour back to that of previous
  15 releases.
  16 ---
  17  drivers/net/phy/broadcom.c | 11 +++++++----
  18  1 file changed, 7 insertions(+), 4 deletions(-)
  19
  20 --- a/drivers/net/phy/broadcom.c
  21 +++ b/drivers/net/phy/broadcom.c
  22 @@ -337,6 +337,9 @@ static void bcm54xx_ptp_config_init(stru
  23  static int bcm54xx_config_init(struct phy_device *phydev)
  24  {
  25         int reg, err, val;
  26 +       u32 led_modes[] = {BCM_LED_MULTICOLOR_LINK_ACT,
  27 +                          BCM_LED_MULTICOLOR_LINK};
  28 +       struct device_node *np = phydev->mdio.dev.of_node;
  29
  30         reg = phy_read(phydev, MII_BCM54XX_ECR);
  31         if (reg < 0)
  32 @@ -392,10 +395,10 @@ static int bcm54xx_config_init(struct ph
  33
  34         bcm54xx_phydsp_config(phydev);
  35
  36 +       of_property_read_u32_array(np, "led-modes", led_modes, 2);
  37 +
  38         /* For non-SFP setups, encode link speed into LED1 and LED3 pair
  39          * (green/amber).
  40 -        * Also flash these two LEDs on activity. This means configuring
  41 -        * them for MULTICOLOR and encoding link/activity into them.
  42          * Don't do this for devices on an SFP module, since some of these
  43          * use the LED outputs to control the SFP LOS signal, and changing
  44          * these settings will cause LOS to malfunction.
  45 @@ -406,8 +409,8 @@ static int bcm54xx_config_init(struct ph
  46                 bcm_phy_write_shadow(phydev, BCM5482_SHD_LEDS1, val);
  47
  48                 val = BCM_LED_MULTICOLOR_IN_PHASE |
  49 -                       BCM5482_SHD_LEDS1_LED1(BCM_LED_MULTICOLOR_LINK_ACT) |
  50 -                       BCM5482_SHD_LEDS1_LED3(BCM_LED_MULTICOLOR_LINK_ACT);
  51 +                       BCM5482_SHD_LEDS1_LED1(led_modes[0]) |
  52 +                       BCM5482_SHD_LEDS1_LED3(led_modes[1]);
  53                 bcm_phy_write_exp(phydev, BCM_EXP_MULTICOLOR, val);
  54         }
  55