git.openwrt.org Git - openwrt/staging/mans0n.git/blob

   1 From 42e01cb9cb109fb0bb4743f6c54d6aa67ac39b61 Mon Sep 17 00:00:00 2001
   2 Message-Id: <42e01cb9cb109fb0bb4743f6c54d6aa67ac39b61.1515610034.git.mschiffer@universe-factory.net>
   3 In-Reply-To: <9df7ddc3ed25b7d3473f117a0680b9418adb5753.1515610034.git.mschiffer@universe-factory.net>
   4 References: <9df7ddc3ed25b7d3473f117a0680b9418adb5753.1515610034.git.mschiffer@universe-factory.net>
   5 From: Matthias Schiffer <mschiffer@universe-factory.net>
   6 Date: Mon, 27 Nov 2017 18:56:23 +0100
   7 Subject: [PATCH 2/2] ath10k: move spectral scan support under a separate
   8  config symbol
   9
  10 At the moment, spectral scan support, and with it RELAY, is always enabled
  11 with ATH10K_DEBUGFS. Spectral scan support is currently the only user of
  12 RELAY in ath10k, and it unconditionally reserves a relay channel.
  13
  14 Having debugfs support in ath10k is often useful even on very small
  15 embedded routers, where we'd rather like to avoid the code size and RAM
  16 usage of the relay support. While ath10k-based devices usually have more
  17 resources than ath9k-based ones, it makes sense to keep the configuration
  18 symmetric to ath9k, so the same base kernel without RELAY can be used for
  19 both ath9k and ath10k hardware.
  20
  21 Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
  22 Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
  23 ---
  24  drivers/net/wireless/ath/ath10k/Kconfig    | 9 ++++++++-
  25  drivers/net/wireless/ath/ath10k/Makefile   | 2 +-
  26  drivers/net/wireless/ath/ath10k/spectral.h | 4 ++--
  27  3 files changed, 11 insertions(+), 4 deletions(-)
  28
  29 --- a/drivers/net/wireless/ath/ath10k/Kconfig
  30 +++ b/drivers/net/wireless/ath/ath10k/Kconfig
  31 @@ -51,12 +51,19 @@ config ATH10K_DEBUG
  32  config ATH10K_DEBUGFS
  33         bool "Atheros ath10k debugfs support"
  34         depends on ATH10K && DEBUG_FS
  35 -       depends on RELAY
  36         ---help---
  37           Enabled debugfs support
  38
  39           If unsure, say Y to make it easier to debug problems.
  40
  41 +config ATH10K_SPECTRAL
  42 +       bool "Atheros ath10k spectral scan support"
  43 +       depends on ATH10K_DEBUGFS
  44 +       depends on RELAY
  45 +       default n
  46 +       ---help---
  47 +         Say Y to enable access to the FFT/spectral data via debugfs.
  48 +
  49  config ATH10K_TRACING
  50         depends on !KERNEL_3_4
  51         bool "Atheros ath10k tracing support"
  52 --- a/drivers/net/wireless/ath/ath10k/Makefile
  53 +++ b/drivers/net/wireless/ath/ath10k/Makefile
  54 @@ -14,7 +14,7 @@ ath10k_core-y += mac.o \
  55                  p2p.o \
  56                  swap.o
  57
  58 -ath10k_core-$(CPTCFG_ATH10K_DEBUGFS) += spectral.o
  59 +ath10k_core-$(CPTCFG_ATH10K_SPECTRAL) += spectral.o
  60  ath10k_core-$(CPTCFG_NL80211_TESTMODE) += testmode.o
  61  ath10k_core-$(CPTCFG_ATH10K_TRACING) += trace.o
  62  ath10k_core-$(CPTCFG_ATH10K_THERMAL) += thermal.o
  63 --- a/drivers/net/wireless/ath/ath10k/spectral.h
  64 +++ b/drivers/net/wireless/ath/ath10k/spectral.h
  65 @@ -44,7 +44,7 @@ enum ath10k_spectral_mode {
  66         SPECTRAL_MANUAL,
  67  };
  68
  69 -#ifdef CPTCFG_ATH10K_DEBUGFS
  70 +#ifdef CPTCFG_ATH10K_SPECTRAL
  71
  72  int ath10k_spectral_process_fft(struct ath10k *ar,
  73                                 struct wmi_phyerr_ev_arg *phyerr,
  74 @@ -85,6 +85,6 @@ static inline void ath10k_spectral_destr
  75  {
  76  }
  77
  78 -#endif /* CPTCFG_ATH10K_DEBUGFS */
  79 +#endif /* CPTCFG_ATH10K_SPECTRAL */
  80
  81  #endif /* SPECTRAL_H */
  82 --- a/local-symbols
  83 +++ b/local-symbols
  84 @@ -140,6 +140,7 @@ ATH10K_SDIO=
  85  ATH10K_USB=
  86  ATH10K_DEBUG=
  87  ATH10K_DEBUGFS=
  88 +ATH10K_SPECTRAL=
  89  ATH10K_THERMAL=
  90  ATH10K_TRACING=
  91  ATH10K_DFS_CERTIFIED=