git.openwrt.org Git - openwrt/staging/wigyori.git/blob

   1 From 25d2ba94005fac18fe68878cddff59a67e115554 Mon Sep 17 00:00:00 2001
   2 From: Christian Marangi <ansuelsmth@gmail.com>
   3 Date: Fri, 8 Dec 2023 15:51:53 +0100
   4 Subject: [PATCH 06/13] net: phy: at803x: move specific at8031 probe mode check
   5  to dedicated probe
   6
   7 Move specific at8031 probe mode check to dedicated probe to make
   8 at803x_probe more generic and keep code tidy.
   9
  10 Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
  11 Reviewed-by: Andrew Lunn <andrew@lunn.ch>
  12 Signed-off-by: David S. Miller <davem@davemloft.net>
  13 ---
  14  drivers/net/phy/at803x.c | 39 +++++++++++++++++++--------------------
  15  1 file changed, 19 insertions(+), 20 deletions(-)
  16
  17 --- a/drivers/net/phy/at803x.c
  18 +++ b/drivers/net/phy/at803x.c
  19 @@ -844,26 +844,6 @@ static int at803x_probe(struct phy_devic
  20         if (ret)
  21                 return ret;
  22
  23 -       if (phydev->drv->phy_id == ATH8031_PHY_ID) {
  24 -               int ccr = phy_read(phydev, AT803X_REG_CHIP_CONFIG);
  25 -               int mode_cfg;
  26 -
  27 -               if (ccr < 0)
  28 -                       return ccr;
  29 -               mode_cfg = ccr & AT803X_MODE_CFG_MASK;
  30 -
  31 -               switch (mode_cfg) {
  32 -               case AT803X_MODE_CFG_BX1000_RGMII_50OHM:
  33 -               case AT803X_MODE_CFG_BX1000_RGMII_75OHM:
  34 -                       priv->is_1000basex = true;
  35 -                       fallthrough;
  36 -               case AT803X_MODE_CFG_FX100_RGMII_50OHM:
  37 -               case AT803X_MODE_CFG_FX100_RGMII_75OHM:
  38 -                       priv->is_fiber = true;
  39 -                       break;
  40 -               }
  41 -       }
  42 -
  43         return 0;
  44  }
  45
  46 @@ -1584,6 +1564,9 @@ static int at8031_parse_dt(struct phy_de
  47
  48  static int at8031_probe(struct phy_device *phydev)
  49  {
  50 +       struct at803x_priv *priv = phydev->priv;
  51 +       int mode_cfg;
  52 +       int ccr;
  53         int ret;
  54
  55         ret = at803x_probe(phydev);
  56 @@ -1597,6 +1580,22 @@ static int at8031_probe(struct phy_devic
  57         if (ret)
  58                 return ret;
  59
  60 +       ccr = phy_read(phydev, AT803X_REG_CHIP_CONFIG);
  61 +       if (ccr < 0)
  62 +               return ccr;
  63 +       mode_cfg = ccr & AT803X_MODE_CFG_MASK;
  64 +
  65 +       switch (mode_cfg) {
  66 +       case AT803X_MODE_CFG_BX1000_RGMII_50OHM:
  67 +       case AT803X_MODE_CFG_BX1000_RGMII_75OHM:
  68 +               priv->is_1000basex = true;
  69 +               fallthrough;
  70 +       case AT803X_MODE_CFG_FX100_RGMII_50OHM:
  71 +       case AT803X_MODE_CFG_FX100_RGMII_75OHM:
  72 +               priv->is_fiber = true;
  73 +               break;
  74 +       }
  75 +
  76         /* Disable WoL in 1588 register which is enabled
  77          * by default
  78          */