git.openwrt.org Git - openwrt/staging/nbd.git/blob

   1 From b1e290ec968186530ec59479adfba89d2cfe21c8 Mon Sep 17 00:00:00 2001
   2 From: Vladimir Oltean <olteanv@gmail.com>
   3 Date: Sun, 24 Mar 2019 00:18:46 +0200
   4 Subject: [PATCH] net: phy: bcm54xx: Encode link speed and activity
   5  into LEDs
   6
   7 Previously the green and amber LEDs on this quad PHY were solid, to
   8 indicate an encoding of the link speed (10/100/1000).
   9
  10 This keeps the LEDs always on just as before, but now they flash on
  11 Rx/Tx activity.
  12
  13 Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
  14 Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
  15 Signed-off-by: David S. Miller <davem@davemloft.net>
  16 ---
  17  drivers/net/phy/broadcom.c | 13 +++++++++++++
  18  include/linux/brcmphy.h    | 16 ++++++++++++++++
  19  2 files changed, 29 insertions(+)
  20
  21 --- a/drivers/net/phy/broadcom.c
  22 +++ b/drivers/net/phy/broadcom.c
  23 @@ -345,6 +345,19 @@ static int bcm54xx_config_init(struct ph
  24
  25         bcm54xx_phydsp_config(phydev);
  26
  27 +       /* Encode link speed into LED1 and LED3 pair (green/amber).
  28 +        * Also flash these two LEDs on activity. This means configuring
  29 +        * them for MULTICOLOR and encoding link/activity into them.
  30 +        */
  31 +       val = BCM5482_SHD_LEDS1_LED1(BCM_LED_SRC_MULTICOLOR1) |
  32 +               BCM5482_SHD_LEDS1_LED3(BCM_LED_SRC_MULTICOLOR1);
  33 +       bcm_phy_write_shadow(phydev, BCM5482_SHD_LEDS1, val);
  34 +
  35 +       val = BCM_LED_MULTICOLOR_IN_PHASE |
  36 +               BCM5482_SHD_LEDS1_LED1(BCM_LED_MULTICOLOR_LINK_ACT) |
  37 +               BCM5482_SHD_LEDS1_LED3(BCM_LED_MULTICOLOR_LINK_ACT);
  38 +       bcm_phy_write_exp(phydev, BCM_EXP_MULTICOLOR, val);
  39 +
  40         return 0;
  41  }
  42
  43 --- a/include/linux/brcmphy.h
  44 +++ b/include/linux/brcmphy.h
  45 @@ -148,6 +148,22 @@
  46  #define BCM_LED_SRC_OFF                0xe     /* Tied high */
  47  #define BCM_LED_SRC_ON         0xf     /* Tied low */
  48
  49 +/*
  50 + * Broadcom Multicolor LED configurations (expansion register 4)
  51 + */
  52 +#define BCM_EXP_MULTICOLOR             (MII_BCM54XX_EXP_SEL_ER + 0x04)
  53 +#define BCM_LED_MULTICOLOR_IN_PHASE    BIT(8)
  54 +#define BCM_LED_MULTICOLOR_LINK_ACT    0x0
  55 +#define BCM_LED_MULTICOLOR_SPEED       0x1
  56 +#define BCM_LED_MULTICOLOR_ACT_FLASH   0x2
  57 +#define BCM_LED_MULTICOLOR_FDX         0x3
  58 +#define BCM_LED_MULTICOLOR_OFF         0x4
  59 +#define BCM_LED_MULTICOLOR_ON          0x5
  60 +#define BCM_LED_MULTICOLOR_ALT         0x6
  61 +#define BCM_LED_MULTICOLOR_FLASH       0x7
  62 +#define BCM_LED_MULTICOLOR_LINK                0x8
  63 +#define BCM_LED_MULTICOLOR_ACT         0x9
  64 +#define BCM_LED_MULTICOLOR_PROGRAM     0xa
  65
  66  /*
  67   * BCM5482: Shadow registers