git.openwrt.org Git - openwrt/staging/jow.git/blob

   1 From 2dfd145470894296d70873942ae056340e3fd78d Mon Sep 17 00:00:00 2001
   2 From: Ran Wang <ran.wang_1@nxp.com>
   3 Date: Tue, 7 Jul 2020 15:40:31 +0800
   4 Subject: [PATCH] arm64: dts: ls1043a: update USB nodes status to match board
   5  config
   6 MIME-Version: 1.0
   7 Content-Type: text/plain; charset=UTF-8
   8 Content-Transfer-Encoding: 8bit
   9
  10 ls1043a-rdb and ls1043a-qds board’s default HW config (such as
  11 pin mux selection) would not enable some USB controllers’
  12 data path, which causing over-current detected on those
  13 controllers. This will hit the case of ‘xhci driver prevent bus suspend
  14 if a root hub port detected over-current condition’, causing system
  15 failed to be suspended. So disable them in device tree to resolve this
  16 issue.
  17
  18 Signed-off-by: Ran Wang <ran.wang_1@nxp.com>
  19 Signed-off-by: Shawn Guo <shawnguo@kernel.org>
  20 ---
  21  arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts | 4 ++++
  22  arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts | 8 ++++++++
  23  arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi    | 3 +++
  24  3 files changed, 15 insertions(+)
  25
  26 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
  27 +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-qds.dts
  28 @@ -167,6 +167,10 @@
  29         };
  30  };
  31
  32 +&usb0 {
  33 +       status = "okay";
  34 +};
  35 +
  36  #include "fsl-ls1043-post.dtsi"
  37
  38  &fman0 {
  39 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
  40 +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a-rdb.dts
  41 @@ -212,3 +212,11 @@
  42                 };
  43         };
  44  };
  45 +
  46 +&usb0 {
  47 +       status = "okay";
  48 +};
  49 +
  50 +&usb1 {
  51 +       status = "okay";
  52 +};
  53 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
  54 +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
  55 @@ -706,6 +706,7 @@
  56                                 snps,host-vbus-glitches;
  57                                 configure-gfladj;
  58                                 dma-coherent;
  59 +                               status = "disabled";
  60                         };
  61
  62                         usb1: usb3@3000000 {
  63 @@ -721,6 +722,7 @@
  64                                 snps,host-vbus-glitches;
  65                                 configure-gfladj;
  66                                 dma-coherent;
  67 +                               status = "disabled";
  68                         };
  69
  70                         usb2: usb3@3100000 {
  71 @@ -736,6 +738,7 @@
  72                                 snps,host-vbus-glitches;
  73                                 configure-gfladj;
  74                                 dma-coherent;
  75 +                               status = "disabled";
  76                         };
  77
  78                         sata: sata@3200000 {