git.openwrt.org Git - openwrt/staging/xback.git/blob

   1 From 13ad5ccc093ff448b99ac7e138e91e78796adb48 Mon Sep 17 00:00:00 2001
   2 From: Ansuel Smith <ansuelsmth@gmail.com>
   3 Date: Thu, 14 Oct 2021 00:39:12 +0200
   4 Subject: dt-bindings: net: dsa: qca8k: Document qca,sgmii-enable-pll
   5
   6 Document qca,sgmii-enable-pll binding used in the CPU nodes to
   7 enable SGMII PLL on MAC config.
   8
   9 Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
  10 Signed-off-by: David S. Miller <davem@davemloft.net>
  11 ---
  12  Documentation/devicetree/bindings/net/dsa/qca8k.txt | 10 ++++++++++
  13  1 file changed, 10 insertions(+)
  14
  15 --- a/Documentation/devicetree/bindings/net/dsa/qca8k.txt
  16 +++ b/Documentation/devicetree/bindings/net/dsa/qca8k.txt
  17 @@ -45,6 +45,16 @@ A CPU port node has the following option
  18                                  Mostly used in qca8327 with CPU port 0 set to
  19                                  sgmii.
  20  - qca,sgmii-txclk-falling-edge: Set the transmit clock phase to falling edge.
  21 +- qca,sgmii-enable-pll  : For SGMII CPU port, explicitly enable PLL, TX and RX
  22 +                          chain along with Signal Detection.
  23 +                          This should NOT be enabled for qca8327. If enabled with
  24 +                          qca8327 the sgmii port won't correctly init and an err
  25 +                          is printed.
  26 +                          This can be required for qca8337 switch with revision 2.
  27 +                          A warning is displayed when used with revision greater
  28 +                          2.
  29 +                          With CPU port set to sgmii and qca8337 it is advised
  30 +                          to set this unless a communication problem is observed.
  31
  32  For QCA8K the 'fixed-link' sub-node supports only the following properties:
  33