git.openwrt.org Git - openwrt/staging/xback.git/blob

   1 From 3ab0c4b6aa76a4dedb51c4e800b5b4ba29187c46 Mon Sep 17 00:00:00 2001
   2 From: James Hughes <james.hughes@raspberrypi.org>
   3 Date: Thu, 31 Oct 2019 14:39:44 +0000
   4 Subject: [PATCH] net:phy:2711 Allow ethernet LED mode to be set via
   5  device tree
   6
   7 Add device tree entries and code to allow the specification of
   8 the lighting modes for the LED's on the ethernet connector.
   9
  10 Signed-off-by: James Hughes <james.hughes@raspberrypi.org>
  11 ---
  12  drivers/net/phy/broadcom.c | 9 +++++++--
  13  1 file changed, 7 insertions(+), 2 deletions(-)
  14
  15 --- a/drivers/net/phy/broadcom.c
  16 +++ b/drivers/net/phy/broadcom.c
  17 @@ -313,6 +313,9 @@ static void bcm54xx_adjust_rxrefclk(stru
  18  static int bcm54xx_config_init(struct phy_device *phydev)
  19  {
  20         int reg, err, val;
  21 +       u32 led_modes[] = {BCM_LED_MULTICOLOR_LINK_ACT,
  22 +                          BCM_LED_MULTICOLOR_LINK_ACT};
  23 +       struct device_node *np = phydev->mdio.dev.of_node;
  24
  25         reg = phy_read(phydev, MII_BCM54XX_ECR);
  26         if (reg < 0)
  27 @@ -368,6 +371,8 @@ static int bcm54xx_config_init(struct ph
  28
  29         bcm54xx_phydsp_config(phydev);
  30
  31 +       of_property_read_u32_array(np, "led-modes", led_modes, 2);
  32 +
  33         /* Encode link speed into LED1 and LED3 pair (green/amber).
  34          * Also flash these two LEDs on activity. This means configuring
  35          * them for MULTICOLOR and encoding link/activity into them.
  36 @@ -377,8 +382,8 @@ static int bcm54xx_config_init(struct ph
  37         bcm_phy_write_shadow(phydev, BCM5482_SHD_LEDS1, val);
  38
  39         val = BCM_LED_MULTICOLOR_IN_PHASE |
  40 -               BCM5482_SHD_LEDS1_LED1(BCM_LED_MULTICOLOR_LINK_ACT) |
  41 -               BCM5482_SHD_LEDS1_LED3(BCM_LED_MULTICOLOR_LINK_ACT);
  42 +               BCM5482_SHD_LEDS1_LED1(led_modes[0]) |
  43 +               BCM5482_SHD_LEDS1_LED3(led_modes[1]);
  44         bcm_phy_write_exp(phydev, BCM_EXP_MULTICOLOR, val);
  45
  46         return 0;