git.openwrt.org Git - openwrt/staging/neocturne.git/blob

   1 From 46fbde5380a7a1707e19ac46842cb9ce526c5216 Mon Sep 17 00:00:00 2001
   2 From: Dave Stevenson <dave.stevenson@raspberrypi.com>
   3 Date: Tue, 14 Dec 2021 14:54:15 +0000
   4 Subject: [PATCH] ARM: dts: bcm2711-cm4s Correct i2c0mux to use 0/1 and
   5  28/29 & 2 regulators
   6
   7 CM4S follows CM1/3, so based on the documentation cameras/displays
   8 connect to 0/1 and 28/29, not 0/1 and 44/45.
   9
  10 Likewise the camera regulator controls are independent as on CM1/3.
  11
  12 Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
  13 ---
  14  arch/arm/boot/dts/bcm2711-rpi-cm4s.dts | 18 ++++++++++++++++--
  15  1 file changed, 16 insertions(+), 2 deletions(-)
  16
  17 --- a/arch/arm/boot/dts/bcm2711-rpi-cm4s.dts
  18 +++ b/arch/arm/boot/dts/bcm2711-rpi-cm4s.dts
  19 @@ -155,14 +155,28 @@
  20
  21  #include "bcm283x-rpi-csi0-2lane.dtsi"
  22  #include "bcm283x-rpi-csi1-4lane.dtsi"
  23 -#include "bcm283x-rpi-i2c0mux_0_44.dtsi"
  24 -#include "bcm283x-rpi-cam1-regulator.dtsi"
  25 +#include "bcm283x-rpi-i2c0mux_0_28.dtsi"
  26
  27  / {
  28         chosen {
  29                 bootargs = "coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1";
  30         };
  31
  32 +       cam1_reg: cam1_reg {
  33 +               compatible = "regulator-fixed";
  34 +               regulator-name = "cam1-regulator";
  35 +               gpio = <&gpio 2 GPIO_ACTIVE_HIGH>;
  36 +               enable-active-high;
  37 +               status = "disabled";
  38 +       };
  39 +       cam0_reg: cam0_reg {
  40 +               compatible = "regulator-fixed";
  41 +               regulator-name = "cam0-regulator";
  42 +               gpio = <&gpio 30 GPIO_ACTIVE_HIGH>;
  43 +               enable-active-high;
  44 +               status = "disabled";
  45 +       };
  46 +
  47         aliases {
  48                 serial0 = &uart0;
  49                 mmc0 = &emmc2;