git.openwrt.org Git - openwrt/staging/ansuel.git/blob

   1 From 14d4e308e0aa0b78dc7a059716861a4380de3535 Mon Sep 17 00:00:00 2001
   2 From: Aleksander Jan Bajkowski <olek2@wp.pl>
   3 Date: Tue, 14 Sep 2021 23:21:02 +0200
   4 Subject: [PATCH 5/5] net: lantiq: configure the burst length in ethernet
   5  drivers
   6
   7 Configure the burst length in Ethernet drivers. This improves
   8 Ethernet performance by 58%. According to the vendor BSP,
   9 8W burst length is supported by ar9 and newer SoCs.
  10
  11 The NAT benchmark results on xRX200 (Down/Up):
  12 * 2W: 330 Mb/s
  13 * 4W: 432 Mb/s    372 Mb/s
  14 * 8W: 520 Mb/s    389 Mb/s
  15
  16 Tested on xRX200 and xRX330.
  17
  18 Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
  19 Signed-off-by: David S. Miller <davem@davemloft.net>
  20 ---
  21  drivers/net/ethernet/lantiq_etop.c   | 21 ++++++++++++++++++---
  22  drivers/net/ethernet/lantiq_xrx200.c | 21 ++++++++++++++++++---
  23  2 files changed, 36 insertions(+), 6 deletions(-)
  24
  25 --- a/drivers/net/ethernet/lantiq_etop.c
  26 +++ b/drivers/net/ethernet/lantiq_etop.c
  27 @@ -148,6 +148,9 @@ struct ltq_etop_priv {
  28         struct ltq_etop_chan txch;
  29         struct ltq_etop_chan rxch;
  30
  31 +       int tx_burst_len;
  32 +       int rx_burst_len;
  33 +
  34         int tx_irq;
  35         int rx_irq;
  36
  37 @@ -399,7 +402,7 @@ ltq_etop_dma_init(struct net_device *dev
  38         int rx = priv->rx_irq - LTQ_DMA_ETOP;
  39         int err;
  40
  41 -       ltq_dma_init_port(DMA_PORT_ETOP);
  42 +       ltq_dma_init_port(DMA_PORT_ETOP, priv->tx_burst_len, rx_burst_len);
  43
  44         priv->txch.dma.nr = tx;
  45         priv->txch.dma.dev = &priv->pdev->dev;
  46 @@ -676,8 +679,8 @@ ltq_etop_tx(struct sk_buff *skb, struct
  47                 return NETDEV_TX_BUSY;
  48         }
  49
  50 -       /* dma needs to start on a 16 byte aligned address */
  51 -       byte_offset = CPHYSADDR(skb->data) % 16;
  52 +       /* dma needs to start on a burst length value aligned address */
  53 +       byte_offset = CPHYSADDR(skb->data) % (priv->tx_burst_len * 4);
  54         priv->txch.skb[priv->txch.dma.desc] = skb;
  55
  56         netif_trans_update(dev);
  57 @@ -925,6 +928,18 @@ static int ltq_etop_probe(struct platfor
  58         spin_lock_init(&priv->lock);
  59         SET_NETDEV_DEV(dev, &pdev->dev);
  60
  61 +       err = device_property_read_u32(&pdev->dev, "lantiq,tx-burst-length", &priv->tx_burst_len);
  62 +       if (err < 0) {
  63 +               dev_err(&pdev->dev, "unable to read tx-burst-length property\n");
  64 +               return err;
  65 +       }
  66 +
  67 +       err = device_property_read_u32(&pdev->dev, "lantiq,rx-burst-length", &priv->rx_burst_len);
  68 +       if (err < 0) {
  69 +               dev_err(&pdev->dev, "unable to read rx-burst-length property\n");
  70 +               return err;
  71 +       }
  72 +
  73         netif_napi_add(dev, &priv->txch.napi, ltq_etop_poll_tx, 8);
  74         netif_napi_add(dev, &priv->rxch.napi, ltq_etop_poll_rx, 32);
  75         priv->txch.netdev = dev;
  76 --- a/drivers/net/ethernet/lantiq_xrx200.c
  77 +++ b/drivers/net/ethernet/lantiq_xrx200.c
  78 @@ -81,6 +81,9 @@ struct xrx200_priv {
  79         struct net_device *net_dev;
  80         struct device *dev;
  81
  82 +       int tx_burst_len;
  83 +       int rx_burst_len;
  84 +
  85         __iomem void *pmac_reg;
  86  };
  87
  88 @@ -363,8 +366,8 @@ static netdev_tx_t xrx200_start_xmit(str
  89         if (unlikely(dma_mapping_error(priv->dev, mapping)))
  90                 goto err_drop;
  91
  92 -       /* dma needs to start on a 16 byte aligned address */
  93 -       byte_offset = mapping % 16;
  94 +       /* dma needs to start on a burst length value aligned address */
  95 +       byte_offset = mapping % (priv->tx_burst_len * 4);
  96
  97         desc->addr = mapping - byte_offset;
  98         /* Make sure the address is written before we give it to HW */
  99 @@ -465,7 +468,7 @@ static int xrx200_dma_init(struct xrx200
 100         int ret = 0;
 101         int i;
 102
 103 -       ltq_dma_init_port(DMA_PORT_ETOP);
 104 +       ltq_dma_init_port(DMA_PORT_ETOP, priv->tx_burst_len, rx_burst_len);
 105
 106         ch_rx->dma.nr = XRX200_DMA_RX;
 107         ch_rx->dma.dev = priv->dev;
 108 @@ -575,6 +578,18 @@ static int xrx200_probe(struct platform_
 109         if (err)
 110                 eth_hw_addr_random(net_dev);
 111
 112 +       err = device_property_read_u32(dev, "lantiq,tx-burst-length", &priv->tx_burst_len);
 113 +       if (err < 0) {
 114 +               dev_err(dev, "unable to read tx-burst-length property\n");
 115 +               return err;
 116 +       }
 117 +
 118 +       err = device_property_read_u32(dev, "lantiq,rx-burst-length", &priv->rx_burst_len);
 119 +       if (err < 0) {
 120 +               dev_err(dev, "unable to read rx-burst-length property\n");
 121 +               return err;
 122 +       }
 123 +
 124         /* bring up the dma engine and IP core */
 125         err = xrx200_dma_init(priv);
 126         if (err)