git.openwrt.org Git - openwrt/staging/neocturne.git/blob

   1 From 921a7deee767aa157b5372863a4c1cac53e5c53a Mon Sep 17 00:00:00 2001
   2 From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
   3 Date: Tue, 6 Feb 2024 01:08:05 +0300
   4 Subject: [PATCH 33/48] net: dsa: mt7530: call port 6 setup from
   5  mt7530_mac_config()
   6 MIME-Version: 1.0
   7 Content-Type: text/plain; charset=UTF-8
   8 Content-Transfer-Encoding: 8bit
   9
  10 mt7530_pad_clk_setup() is called if port 6 is enabled. It used to do more
  11 things than setting up port 6. That part was moved to more appropriate
  12 locations, mt7530_setup() and mt7530_pll_setup().
  13
  14 Now that all it does is set up port 6, rename it to mt7530_setup_port6(),
  15 and move it to a more appropriate location, under mt7530_mac_config().
  16
  17 Change mt7530_setup_port6() to void as there're no error cases.
  18
  19 Leave an empty mt7530_pad_clk_setup() to satisfy the pad_setup function
  20 pointer.
  21
  22 This is the code path for setting up the ports before:
  23
  24 dsa_switch_ops :: phylink_mac_config() -> mt753x_phylink_mac_config()
  25 -> mt753x_mac_config()
  26    -> mt753x_info :: mac_port_config() -> mt7530_mac_config()
  27       -> mt7530_setup_port5()
  28 -> mt753x_pad_setup()
  29    -> mt753x_info :: pad_setup() -> mt7530_pad_clk_setup()
  30
  31 This is after:
  32
  33 dsa_switch_ops :: phylink_mac_config() -> mt753x_phylink_mac_config()
  34 -> mt753x_mac_config()
  35    -> mt753x_info :: mac_port_config() -> mt7530_mac_config()
  36       -> mt7530_setup_port5()
  37       -> mt7530_setup_port6()
  38
  39 Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
  40 Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
  41 Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
  42 Link: https://lore.kernel.org/r/20240206-for-netnext-mt7530-improvements-2-v5-4-d7d92a185cb1@arinc9.com
  43 Signed-off-by: Jakub Kicinski <kuba@kernel.org>
  44 ---
  45  drivers/net/dsa/mt7530.c | 19 +++++++++++--------
  46  1 file changed, 11 insertions(+), 8 deletions(-)
  47
  48 --- a/drivers/net/dsa/mt7530.c
  49 +++ b/drivers/net/dsa/mt7530.c
  50 @@ -414,8 +414,8 @@ mt753x_preferred_default_local_cpu_port(
  51  }
  52
  53  /* Setup port 6 interface mode and TRGMII TX circuit */
  54 -static int
  55 -mt7530_pad_clk_setup(struct dsa_switch *ds, phy_interface_t interface)
  56 +static void
  57 +mt7530_setup_port6(struct dsa_switch *ds, phy_interface_t interface)
  58  {
  59         struct mt7530_priv *priv = ds->priv;
  60         u32 ncpo1, ssc_delta, xtal;
  61 @@ -426,7 +426,7 @@ mt7530_pad_clk_setup(struct dsa_switch *
  62         if (interface == PHY_INTERFACE_MODE_RGMII) {
  63                 mt7530_rmw(priv, MT7530_P6ECR, P6_INTF_MODE_MASK,
  64                            P6_INTF_MODE(0));
  65 -               return 0;
  66 +               return;
  67         }
  68
  69         mt7530_rmw(priv, MT7530_P6ECR, P6_INTF_MODE_MASK, P6_INTF_MODE(1));
  70 @@ -465,7 +465,11 @@ mt7530_pad_clk_setup(struct dsa_switch *
  71
  72         /* Enable the MT7530 TRGMII clocks */
  73         core_set(priv, CORE_TRGMII_GSW_CLK_CG, REG_TRGMIICK_EN);
  74 +}
  75
  76 +static int
  77 +mt7530_pad_clk_setup(struct dsa_switch *ds, phy_interface_t interface)
  78 +{
  79         return 0;
  80  }
  81
  82 @@ -2829,11 +2833,10 @@ mt7530_mac_config(struct dsa_switch *ds,
  83  {
  84         struct mt7530_priv *priv = ds->priv;
  85
  86 -       /* Only need to setup port5. */
  87 -       if (port != 5)
  88 -               return 0;
  89 -
  90 -       mt7530_setup_port5(priv->ds, interface);
  91 +       if (port == 5)
  92 +               mt7530_setup_port5(priv->ds, interface);
  93 +       else if (port == 6)
  94 +               mt7530_setup_port6(priv->ds, interface);
  95
  96         return 0;
  97  }