git.openwrt.org Git - openwrt/staging/ansuel.git/blob

   1 From e19de30d20809af3221ef8a2648b8a8a52e02d90 Mon Sep 17 00:00:00 2001
   2 From: Daniel Golle <daniel@makrotopia.org>
   3 Date: Wed, 21 Sep 2022 01:23:14 +0100
   4 Subject: [PATCH 1/1] net: dsa: mt7530: add support for in-band link status
   5
   6 Read link status from SGMII PCS for in-band managed 2500Base-X and
   7 1000Base-X connection on a MAC port of the MT7531. This is needed to
   8 get the SFP cage working which is connected to SGMII interface of
   9 port 5 of the MT7531 switch IC on the Bananapi BPi-R3 board.
  10 While at it also handle an_complete for both the autoneg and the
  11 non-autoneg codepath.
  12
  13 Signed-off-by: Daniel Golle <daniel@makrotopia.org>
  14 Signed-off-by: David S. Miller <davem@davemloft.net>
  15 ---
  16  drivers/net/dsa/mt7530.c | 50 +++++++++++++++++++++++++++++-----------
  17  drivers/net/dsa/mt7530.h |  1 +
  18  2 files changed, 38 insertions(+), 13 deletions(-)
  19
  20 --- a/drivers/net/dsa/mt7530.c
  21 +++ b/drivers/net/dsa/mt7530.c
  22 @@ -2791,9 +2791,6 @@ mt7531_mac_config(struct dsa_switch *ds,
  23         case PHY_INTERFACE_MODE_NA:
  24         case PHY_INTERFACE_MODE_1000BASEX:
  25         case PHY_INTERFACE_MODE_2500BASEX:
  26 -               if (phylink_autoneg_inband(mode))
  27 -                       return -EINVAL;
  28 -
  29                 return mt7531_sgmii_setup_mode_force(priv, port, interface);
  30         default:
  31                 return -EINVAL;
  32 @@ -2869,13 +2866,6 @@ unsupported:
  33                 return;
  34         }
  35
  36 -       if (phylink_autoneg_inband(mode) &&
  37 -           state->interface != PHY_INTERFACE_MODE_SGMII) {
  38 -               dev_err(ds->dev, "%s: in-band negotiation unsupported\n",
  39 -                       __func__);
  40 -               return;
  41 -       }
  42 -
  43         mcr_cur = mt7530_read(priv, MT7530_PMCR_P(port));
  44         mcr_new = mcr_cur;
  45         mcr_new &= ~PMCR_LINK_SETTINGS_MASK;
  46 @@ -3012,6 +3002,9 @@ static void mt753x_phylink_get_caps(stru
  47         config->mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE |
  48                                    MAC_10 | MAC_100 | MAC_1000FD;
  49
  50 +       if ((priv->id == ID_MT7531) && mt753x_is_mac_port(port))
  51 +               config->mac_capabilities |= MAC_2500FD;
  52 +
  53         /* This driver does not make use of the speed, duplex, pause or the
  54          * advertisement in its mac_config, so it is safe to mark this driver
  55          * as non-legacy.
  56 @@ -3077,6 +3070,7 @@ mt7531_sgmii_pcs_get_state_an(struct mt7
  57
  58         status = mt7530_read(priv, MT7531_PCS_CONTROL_1(port));
  59         state->link = !!(status & MT7531_SGMII_LINK_STATUS);
  60 +       state->an_complete = !!(status & MT7531_SGMII_AN_COMPLETE);
  61         if (state->interface == PHY_INTERFACE_MODE_SGMII &&
  62             (status & MT7531_SGMII_AN_ENABLE)) {
  63                 val = mt7530_read(priv, MT7531_PCS_SPEED_ABILITY(port));
  64 @@ -3107,16 +3101,44 @@ mt7531_sgmii_pcs_get_state_an(struct mt7
  65         return 0;
  66  }
  67
  68 +static void
  69 +mt7531_sgmii_pcs_get_state_inband(struct mt7530_priv *priv, int port,
  70 +                                 struct phylink_link_state *state)
  71 +{
  72 +       unsigned int val;
  73 +
  74 +       val = mt7530_read(priv, MT7531_PCS_CONTROL_1(port));
  75 +       state->link = !!(val & MT7531_SGMII_LINK_STATUS);
  76 +       if (!state->link)
  77 +               return;
  78 +
  79 +       state->an_complete = state->link;
  80 +
  81 +       if (state->interface == PHY_INTERFACE_MODE_2500BASEX)
  82 +               state->speed = SPEED_2500;
  83 +       else
  84 +               state->speed = SPEED_1000;
  85 +
  86 +       state->duplex = DUPLEX_FULL;
  87 +       state->pause = MLO_PAUSE_NONE;
  88 +}
  89 +
  90  static void mt7531_pcs_get_state(struct phylink_pcs *pcs,
  91                                  struct phylink_link_state *state)
  92  {
  93         struct mt7530_priv *priv = pcs_to_mt753x_pcs(pcs)->priv;
  94         int port = pcs_to_mt753x_pcs(pcs)->port;
  95
  96 -       if (state->interface == PHY_INTERFACE_MODE_SGMII)
  97 +       if (state->interface == PHY_INTERFACE_MODE_SGMII) {
  98                 mt7531_sgmii_pcs_get_state_an(priv, port, state);
  99 -       else
 100 -               state->link = false;
 101 +               return;
 102 +       } else if ((state->interface == PHY_INTERFACE_MODE_1000BASEX) ||
 103 +                  (state->interface == PHY_INTERFACE_MODE_2500BASEX)) {
 104 +               mt7531_sgmii_pcs_get_state_inband(priv, port, state);
 105 +               return;
 106 +       }
 107 +
 108 +       state->link = false;
 109  }
 110
 111  static int mt753x_pcs_config(struct phylink_pcs *pcs, unsigned int mode,
 112 @@ -3157,6 +3179,8 @@ mt753x_setup(struct dsa_switch *ds)
 113                 priv->pcs[i].pcs.ops = priv->info->pcs_ops;
 114                 priv->pcs[i].priv = priv;
 115                 priv->pcs[i].port = i;
 116 +               if (mt753x_is_mac_port(i))
 117 +                       priv->pcs[i].pcs.poll = 1;
 118         }
 119
 120         ret = priv->info->sw_setup(ds);
 121 --- a/drivers/net/dsa/mt7530.h
 122 +++ b/drivers/net/dsa/mt7530.h
 123 @@ -400,6 +400,7 @@ enum mt7530_vlan_port_acc_frm {
 124  #define  MT7531_SGMII_LINK_STATUS      BIT(18)
 125  #define  MT7531_SGMII_AN_ENABLE                BIT(12)
 126  #define  MT7531_SGMII_AN_RESTART       BIT(9)
 127 +#define  MT7531_SGMII_AN_COMPLETE      BIT(21)
 128
 129  /* Register for SGMII PCS_SPPED_ABILITY */
 130  #define MT7531_PCS_SPEED_ABILITY(p)    MT7531_SGMII_REG(p, 0x08)