git.openwrt.org Git - openwrt/staging/wigyori.git/blob

   1 From cf8f3d4deb02a8fdc806c46d4112b69868544697 Mon Sep 17 00:00:00 2001
   2 From: Tamizh Chelvam Raja <quic_tamizhr@quicinc.com>
   3 Date: Wed, 15 Feb 2023 20:31:36 +0200
   4 Subject: [PATCH] wifi: ath11k: Set ext passive scan flag to adjust passive
   5  scan start time
   6
   7 Set the WMI_SCAN_FLAG_EXT_PASSIVE_SCAN_START_TIME_ENHANCE flag
   8 while sending the scan command.  If this flag is enabled when the
   9 incoming scan request comes with a strict start time and its duration
  10 overlaps with next TBTT, then target adjust the start time accordingly
  11 for passive scan. Target supporting this feature will advertise
  12 WMI_TLV_SERVICE_PASSIVE_SCAN_START_TIME_ENHANCE.
  13
  14 Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.4.0.1-01467-QCAHKSWPL_SILICONZ-1
  15
  16 Signed-off-by: Tamizh Chelvam Raja <quic_tamizhr@quicinc.com>
  17 Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
  18 Link: https://lore.kernel.org/r/20221222131720.11368-1-quic_tamizhr@quicinc.com
  19 ---
  20  drivers/net/wireless/ath/ath11k/wmi.c | 8 ++++++++
  21  drivers/net/wireless/ath/ath11k/wmi.h | 3 +++
  22  2 files changed, 11 insertions(+)
  23
  24 --- a/drivers/net/wireless/ath/ath11k/wmi.c
  25 +++ b/drivers/net/wireless/ath/ath11k/wmi.c
  26 @@ -2068,6 +2068,12 @@ void ath11k_wmi_start_scan_init(struct a
  27                                   WMI_SCAN_EVENT_FOREIGN_CHAN |
  28                                   WMI_SCAN_EVENT_DEQUEUED;
  29         arg->scan_flags |= WMI_SCAN_CHAN_STAT_EVENT;
  30 +
  31 +       if (test_bit(WMI_TLV_SERVICE_PASSIVE_SCAN_START_TIME_ENHANCE,
  32 +                    ar->ab->wmi_ab.svc_map))
  33 +               arg->scan_ctrl_flags_ext |=
  34 +                       WMI_SCAN_FLAG_EXT_PASSIVE_SCAN_START_TIME_ENHANCE;
  35 +
  36         arg->num_bssid = 1;
  37
  38         /* fill bssid_list[0] with 0xff, otherwise bssid and RA will be
  39 @@ -2149,6 +2155,8 @@ ath11k_wmi_copy_scan_event_cntrl_flags(s
  40         /* for adaptive scan mode using 3 bits (21 - 23 bits) */
  41         WMI_SCAN_SET_DWELL_MODE(cmd->scan_ctrl_flags,
  42                                 param->adaptive_dwell_time_mode);
  43 +
  44 +       cmd->scan_ctrl_flags_ext = param->scan_ctrl_flags_ext;
  45  }
  46
  47  int ath11k_wmi_send_scan_start_cmd(struct ath11k *ar,
  48 --- a/drivers/net/wireless/ath/ath11k/wmi.h
  49 +++ b/drivers/net/wireless/ath/ath11k/wmi.h
  50 @@ -2093,6 +2093,7 @@ enum wmi_tlv_service {
  51         WMI_TLV_SERVICE_EXT2_MSG = 220,
  52         WMI_TLV_SERVICE_PEER_POWER_SAVE_DURATION_SUPPORT = 246,
  53         WMI_TLV_SERVICE_SRG_SRP_SPATIAL_REUSE_SUPPORT = 249,
  54 +       WMI_TLV_SERVICE_PASSIVE_SCAN_START_TIME_ENHANCE = 263,
  55
  56         /* The second 128 bits */
  57         WMI_MAX_EXT_SERVICE = 256,
  58 @@ -3223,6 +3224,7 @@ struct  wmi_start_scan_cmd {
  59
  60  #define WMI_SCAN_DWELL_MODE_MASK 0x00E00000
  61  #define WMI_SCAN_DWELL_MODE_SHIFT        21
  62 +#define WMI_SCAN_FLAG_EXT_PASSIVE_SCAN_START_TIME_ENHANCE   0x00000800
  63
  64  enum {
  65         WMI_SCAN_DWELL_MODE_DEFAULT      = 0,
  66 @@ -3270,6 +3272,7 @@ struct scan_req_params {
  67                 };
  68                 u32 scan_events;
  69         };
  70 +       u32 scan_ctrl_flags_ext;
  71         u32 dwell_time_active;
  72         u32 dwell_time_active_2g;
  73         u32 dwell_time_passive;