git.openwrt.org Git - openwrt/staging/neocturne.git/blob

   1 From 4811914a840943a821dd362a9124aea62d228732 Mon Sep 17 00:00:00 2001
   2 From: Naushir Patuck <naush@raspberrypi.com>
   3 Date: Tue, 21 Apr 2020 15:06:19 +0100
   4 Subject: [PATCH] media: uapi: v4l-ctrls: Add CID base for the
   5  bcm2835-isp driver
   6
   7 We are reserving controls for the new bcm2835-isp driver.
   8
   9 Signed-off-by: Naushir Patuck <naush@raspberrypi.com>
  10 ---
  11  .../admin-guide/media/bcm2835-isp.rst         | 127 ++++++++++++++++++
  12  .../userspace-api/media/drivers/index.rst     |   1 +
  13  include/uapi/linux/v4l2-controls.h            |   4 +
  14  3 files changed, 132 insertions(+)
  15  create mode 100644 Documentation/admin-guide/media/bcm2835-isp.rst
  16
  17 --- /dev/null
  18 +++ b/Documentation/admin-guide/media/bcm2835-isp.rst
  19 @@ -0,0 +1,127 @@
  20 +.. SPDX-License-Identifier: GPL-2.0
  21 +
  22 +BCM2835 ISP Driver
  23 +==================
  24 +
  25 +Introduction
  26 +------------
  27 +
  28 +The BCM2835 Image Sensor Pipeline (ISP) is a fixed function hardware pipeline
  29 +for performing image processing operations.  Images are fed to the input
  30 +of the ISP through memory frame buffers.  These images may be in various YUV,
  31 +RGB, or Bayer formats.  A typical use case would have Bayer images obtained from
  32 +an image sensor by the BCM2835 Unicam peripheral, written to a memory
  33 +frame buffer, and finally fed into the input of the ISP.  Two concurrent output
  34 +images may be generated in YUV or RGB format at different resolutions.
  35 +Statistics output is also generated for Bayer input images.
  36 +
  37 +The bcm2835-isp driver exposes the following media pads as V4L2 device nodes:
  38 +
  39 +.. tabularcolumns:: |l|l|l|l|
  40 +
  41 +.. cssclass: longtable
  42 +
  43 +.. flat-table::
  44 +
  45 +    * - *Pad*
  46 +      - *Direction*
  47 +      - *Purpose*
  48 +      - *Formats*
  49 +
  50 +    * - "bcm2835-isp0-output0"
  51 +      - sink
  52 +      - Accepts Bayer, RGB or YUV format frame buffers as input to the ISP HW
  53 +        pipeline.
  54 +      - :ref:`RAW8 <V4L2-PIX-FMT-SRGGB8>`,
  55 +        :ref:`RAW10P <V4L2-PIX-FMT-SRGGB10P>`,
  56 +        :ref:`RAW12P <V4L2-PIX-FMT-SRGGB12P>`,
  57 +        :ref:`RAW14P <V4L2-PIX-FMT-SRGGB14P>`,
  58 +        :ref:`RAW16 <V4L2-PIX-FMT-SRGGB16>`,
  59 +        :ref:`RGB24/BGR24 <V4L2-PIX-FMT-RGB24>`,
  60 +        :ref:`YUYV <V4L2-PIX-FMT-YUYV>`,
  61 +        :ref:`YVYU <V4L2-PIX-FMT-YVYU>`,
  62 +        :ref:`UYVY <V4L2-PIX-FMT-UYVY>`,
  63 +        :ref:`VYUY <V4L2-PIX-FMT-VYUY>`,
  64 +        :ref:`YUV420/YVU420 <V4L2-PIX-FMT-YUV420>`
  65 +
  66 +    * - "bcm2835-isp0-capture1"
  67 +      - source
  68 +      - High resolution YUV or RGB processed output from the ISP.
  69 +      - :ref:`RGB565 <V4L2-PIX-FMT-RGB565>`,
  70 +        :ref:`RGB24/BGR24 <V4L2-PIX-FMT-RGB24>`,
  71 +        :ref:`ABGR32 <V4L2-PIX-FMT-ABGR32>`,
  72 +        :ref:`YUYV <V4L2-PIX-FMT-YUYV>`,
  73 +        :ref:`YVYU <V4L2-PIX-FMT-YVYU>`,
  74 +        :ref:`UYVY <V4L2-PIX-FMT-UYVY>`,
  75 +        :ref:`VYUY <V4L2-PIX-FMT-VYUY>`.
  76 +        :ref:`YUV420/YVU420 <V4L2-PIX-FMT-YUV420>`,
  77 +        :ref:`NV12/NV21 <V4L2-PIX-FMT-NV12>`,
  78 +
  79 +    * - "bcm2835-isp0-capture2"
  80 +      - source
  81 +      - Low resolution YUV processed output from the ISP. The output of
  82 +        this pad cannot have a resolution larger than the "bcm2835-isp0-capture1" pad in any dimension.
  83 +      - :ref:`YUYV <V4L2-PIX-FMT-YUYV>`,
  84 +        :ref:`YVYU <V4L2-PIX-FMT-YVYU>`,
  85 +        :ref:`UYVY <V4L2-PIX-FMT-UYVY>`,
  86 +        :ref:`VYUY <V4L2-PIX-FMT-VYUY>`.
  87 +        :ref:`YUV420/YVU420 <V4L2-PIX-FMT-YUV420>`,
  88 +        :ref:`NV12/NV21 <V4L2-PIX-FMT-NV12>`,
  89 +
  90 +    * - "bcm2835-isp0-capture1"
  91 +      - source
  92 +      - Image statistics calculated from the input image provided on the
  93 +        "bcm2835-isp0-output0" pad.  Statistics are only available for Bayer
  94 +        format input images.
  95 +      - :ref:`v4l2-meta-fmt-bcm2835-isp-stats`.
  96 +
  97 +Pipeline Configuration
  98 +----------------------
  99 +
 100 +The ISP pipeline can be configure through user-space by calling
 101 +:ref:`VIDIOC_S_EXT_CTRLS <VIDIOC_G_EXT_CTRLS>` on the “bcm2835-isp0-output0”
 102 +node with the appropriate parameters as shown in the table below.
 103 +
 104 +.. tabularcolumns:: |p{2cm}|p{5.0cm}|
 105 +
 106 +.. cssclass: longtable
 107 +
 108 +.. flat-table::
 109 +
 110 +    * - *id*
 111 +      - *Parameter*
 112 +
 113 +    * - ``V4L2_CID_USER_BCM2835_ISP_CC_MATRIX``
 114 +      - struct :c:type:`bcm2835_isp_custom_ccm`
 115 +
 116 +    * - ``V4L2_CID_USER_BCM2835_ISP_LENS_SHADING``
 117 +      - struct :c:type:`bcm2835_isp_lens_shading`
 118 +
 119 +    * - ``V4L2_CID_USER_BCM2835_ISP_BLACK_LEVEL``
 120 +      - struct :c:type:`bcm2835_isp_black_level`
 121 +
 122 +    * - ``V4L2_CID_USER_BCM2835_ISP_GEQ``
 123 +      - struct :c:type:`bcm2835_isp_geq`
 124 +
 125 +    * - ``V4L2_CID_USER_BCM2835_ISP_GAMMA``
 126 +      - struct :c:type:`bcm2835_isp_gamma`
 127 +
 128 +    * - ``V4L2_CID_USER_BCM2835_ISP_DENOISE``
 129 +      - struct :c:type:`bcm2835_isp_denoise`
 130 +
 131 +    * - ``V4L2_CID_USER_BCM2835_ISP_SHARPEN``
 132 +      - struct :c:type:`bcm2835_isp_sharpen`
 133 +
 134 +    * - ``V4L2_CID_USER_BCM2835_ISP_DPC``
 135 +      - struct :c:type:`bcm2835_isp_dpc`
 136 +
 137 +++++++++++++++++++++++++
 138 +Configuration Parameters
 139 +++++++++++++++++++++++++
 140 +
 141 +.. kernel-doc:: include/uapi/linux/bcm2835-isp.h
 142 +   :functions: bcm2835_isp_rational bcm2835_isp_ccm bcm2835_isp_custom_ccm
 143 +                bcm2835_isp_gain_format bcm2835_isp_lens_shading
 144 +                bcm2835_isp_black_level bcm2835_isp_geq bcm2835_isp_gamma
 145 +                bcm2835_isp_denoise bcm2835_isp_sharpen
 146 +                bcm2835_isp_dpc_mode bcm2835_isp_dpc
 147 --- a/Documentation/userspace-api/media/drivers/index.rst
 148 +++ b/Documentation/userspace-api/media/drivers/index.rst
 149 @@ -35,6 +35,7 @@ For more details see the file COPYING in
 150         cx2341x-uapi
 151          hantro
 152         imx-uapi
 153 +       bcm2835-isp
 154         max2175
 155         meye-uapi
 156         omap3isp-uapi
 157 --- a/include/uapi/linux/v4l2-controls.h
 158 +++ b/include/uapi/linux/v4l2-controls.h
 159 @@ -212,6 +212,10 @@ enum v4l2_colorfx {
 160   */
 161  #define V4L2_CID_USER_CCS_BASE                 (V4L2_CID_USER_BASE + 0x10f0)
 162
 163 +/* The base for the bcm2835-isp driver controls.
 164 + * We reserve 16 controls for this driver. */
 165 +#define V4L2_CID_USER_BCM2835_ISP_BASE         (V4L2_CID_USER_BASE + 0x10f0)
 166 +
 167  /* MPEG-class control IDs */
 168  /* The MPEG controls are applicable to all codec controls
 169   * and the 'MPEG' part of the define is historical */