git.openwrt.org Git - openwrt/staging/ansuel.git/blob

   1 From 7db9ff164813afb343024d37731ab797ed7f507e Mon Sep 17 00:00:00 2001
   2 From: Sebastian Kropatsch <seb-dev@mail.de>
   3 Date: Thu, 11 Jul 2024 12:15:18 +0200
   4 Subject: [PATCH] board: rockchip: Add FriendlyElec NanoPi R6S
   5
   6 The NanoPi R6S is a SBC by FriendlyElec based on the Rockchip RK3588s.
   7 It comes with 4GB or 8GB of RAM, a microSD card slot, 32GB eMMC storage,
   8 one RTL8211F 1GbE and two RTL8125 2.5GbE Ethernet ports, one USB 2.0
   9 Type-A and one USB 3.0 Type-A port, a HDMI port, a 12-pin GPIO FPC
  10 connector, a fan connector, IR receiver as well as some buttons and LEDs.
  11
  12 Add initial support for this board using the upstream devicetree sources.
  13
  14 Kernel commit:
  15 f1b11f43b3e9 ("arm64: dts: rockchip: Add support for NanoPi R6S")
  16
  17 Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
  18 Signed-off-by: Sebastian Kropatsch <seb-dev@mail.de>
  19 ---
  20  arch/arm/dts/rk3588s-nanopi-r6s-u-boot.dtsi   |  3 +
  21  arch/arm/mach-rockchip/rk3588/Kconfig         | 13 +++
  22  board/friendlyelec/nanopi-r6s-rk3588s/Kconfig | 12 +++
  23  .../nanopi-r6s-rk3588s/MAINTAINERS            |  7 ++
  24  configs/nanopi-r6s-rk3588s_defconfig          | 82 +++++++++++++++++++
  25  doc/board/rockchip/rockchip.rst               |  1 +
  26  include/configs/nanopi-r6s-rk3588s.h          | 12 +++
  27  7 files changed, 130 insertions(+)
  28  create mode 100644 arch/arm/dts/rk3588s-nanopi-r6s-u-boot.dtsi
  29  create mode 100644 board/friendlyelec/nanopi-r6s-rk3588s/Kconfig
  30  create mode 100644 board/friendlyelec/nanopi-r6s-rk3588s/MAINTAINERS
  31  create mode 100644 configs/nanopi-r6s-rk3588s_defconfig
  32  create mode 100644 include/configs/nanopi-r6s-rk3588s.h
  33
  34 --- /dev/null
  35 +++ b/arch/arm/dts/rk3588s-nanopi-r6s-u-boot.dtsi
  36 @@ -0,0 +1,3 @@
  37 +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
  38 +
  39 +#include "rk3588s-u-boot.dtsi"
  40 --- a/arch/arm/mach-rockchip/rk3588/Kconfig
  41 +++ b/arch/arm/mach-rockchip/rk3588/Kconfig
  42 @@ -78,6 +78,18 @@ config TARGET_NANOPCT6_RK3588
  43           Power: 5.5*2.1mm DC Jack, 12VDC input
  44           Dimensions: 110x80x1.6mm (without case) / 86x114.5x30mm (with case)
  45
  46 +config TARGET_NANOPI_R6S_RK3588S
  47 +       bool "FriendlyElec NanoPi R6S"
  48 +       select BOARD_LATE_INIT
  49 +       help
  50 +         The NanoPi R6S is a SBC by FriendlyElec based on the Rockchip
  51 +         RK3588s.
  52 +         It comes with 4GB or 8GB of RAM, a microSD card slot, 32GB eMMC
  53 +         storage, one RTL8211F 1GbE and two RTL8125 2.5GbE Ethernet ports,
  54 +         one USB 2.0 Type-A and one USB 3.0 Type-A port, a HDMI port, a
  55 +         12-pin GPIO FPC connector, a fan connector, IR receiver as well
  56 +         as some buttons and LEDs.
  57 +
  58  config TARGET_NOVA_RK3588
  59         bool "Indiedroid Nova RK3588"
  60         select BOARD_LATE_INIT
  61 @@ -232,6 +244,7 @@ config TEXT_BASE
  62
  63  source "board/edgeble/neural-compute-module-6/Kconfig"
  64  source "board/friendlyelec/nanopc-t6-rk3588/Kconfig"
  65 +source "board/friendlyelec/nanopi-r6s-rk3588s/Kconfig"
  66  source "board/indiedroid/nova/Kconfig"
  67  source "board/pine64/quartzpro64-rk3588/Kconfig"
  68  source "board/turing/turing-rk1-rk3588/Kconfig"
  69 --- /dev/null
  70 +++ b/board/friendlyelec/nanopi-r6s-rk3588s/Kconfig
  71 @@ -0,0 +1,12 @@
  72 +if TARGET_NANOPI_R6S_RK3588S
  73 +
  74 +config SYS_BOARD
  75 +       default "nanopi-r6s-rk3588s"
  76 +
  77 +config SYS_VENDOR
  78 +       default "friendlyelec"
  79 +
  80 +config SYS_CONFIG_NAME
  81 +       default "nanopi-r6s-rk3588s"
  82 +
  83 +endif
  84 --- /dev/null
  85 +++ b/board/friendlyelec/nanopi-r6s-rk3588s/MAINTAINERS
  86 @@ -0,0 +1,7 @@
  87 +NANOPI-R6S
  88 +M:     Sebastian Kropatsch <seb-dev@mail.de>
  89 +S:     Maintained
  90 +F:     arch/arm/dts/rk3588s-nanopi-r6s-u-boot.dtsi
  91 +F:     board/friendlyelec/nanopi-r6s-rk3588s
  92 +F:     configs/nanopi-r6s-rk3588s_defconfig
  93 +F:     include/configs/nanopi-r6s-rk3588s.h
  94 --- /dev/null
  95 +++ b/configs/nanopi-r6s-rk3588s_defconfig
  96 @@ -0,0 +1,82 @@
  97 +CONFIG_ARM=y
  98 +CONFIG_SKIP_LOWLEVEL_INIT=y
  99 +CONFIG_SYS_HAS_NONCACHED_MEMORY=y
 100 +CONFIG_COUNTER_FREQUENCY=24000000
 101 +CONFIG_ARCH_ROCKCHIP=y
 102 +CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3588s-nanopi-r6s"
 103 +CONFIG_ROCKCHIP_RK3588=y
 104 +CONFIG_SPL_SERIAL=y
 105 +CONFIG_TARGET_NANOPI_R6S_RK3588S=y
 106 +CONFIG_DEBUG_UART_BASE=0xFEB50000
 107 +CONFIG_DEBUG_UART_CLOCK=24000000
 108 +CONFIG_SYS_LOAD_ADDR=0xc00800
 109 +CONFIG_PCI=y
 110 +CONFIG_DEBUG_UART=y
 111 +CONFIG_FIT=y
 112 +CONFIG_FIT_VERBOSE=y
 113 +CONFIG_SPL_FIT_SIGNATURE=y
 114 +CONFIG_SPL_LOAD_FIT=y
 115 +CONFIG_LEGACY_IMAGE_FORMAT=y
 116 +CONFIG_DEFAULT_FDT_FILE="rockchip/rk3588s-nanopi-r6s.dtb"
 117 +# CONFIG_DISPLAY_CPUINFO is not set
 118 +CONFIG_DISPLAY_BOARDINFO_LATE=y
 119 +CONFIG_SPL_MAX_SIZE=0x40000
 120 +CONFIG_SPL_PAD_TO=0x7f8000
 121 +# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
 122 +CONFIG_SPL_ATF=y
 123 +CONFIG_CMD_GPIO=y
 124 +CONFIG_CMD_PWM=y
 125 +CONFIG_CMD_GPT=y
 126 +CONFIG_CMD_I2C=y
 127 +CONFIG_CMD_MMC=y
 128 +CONFIG_CMD_PCI=y
 129 +CONFIG_CMD_USB=y
 130 +CONFIG_CMD_ROCKUSB=y
 131 +# CONFIG_CMD_SETEXPR is not set
 132 +CONFIG_CMD_REGULATOR=y
 133 +# CONFIG_SPL_DOS_PARTITION is not set
 134 +CONFIG_SPL_OF_CONTROL=y
 135 +CONFIG_OF_LIVE=y
 136 +CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
 137 +CONFIG_SPL_DM_SEQ_ALIAS=y
 138 +CONFIG_SPL_REGMAP=y
 139 +CONFIG_SPL_SYSCON=y
 140 +CONFIG_SPL_CLK=y
 141 +# CONFIG_USB_FUNCTION_FASTBOOT is not set
 142 +CONFIG_ROCKCHIP_GPIO=y
 143 +CONFIG_SYS_I2C_ROCKCHIP=y
 144 +CONFIG_MISC=y
 145 +CONFIG_SUPPORT_EMMC_RPMB=y
 146 +CONFIG_MMC_DW=y
 147 +CONFIG_MMC_DW_ROCKCHIP=y
 148 +CONFIG_MMC_SDHCI=y
 149 +CONFIG_MMC_SDHCI_SDMA=y
 150 +CONFIG_MMC_SDHCI_ROCKCHIP=y
 151 +# CONFIG_SPI_FLASH is not set
 152 +CONFIG_PHY_REALTEK=y
 153 +CONFIG_DWC_ETH_QOS=y
 154 +CONFIG_DWC_ETH_QOS_ROCKCHIP=y
 155 +CONFIG_RTL8169=y
 156 +CONFIG_PCIE_DW_ROCKCHIP=y
 157 +CONFIG_PHY_ROCKCHIP_INNO_USB2=y
 158 +CONFIG_PHY_ROCKCHIP_NANENG_COMBOPHY=y
 159 +CONFIG_PHY_ROCKCHIP_USBDP=y
 160 +CONFIG_SPL_PINCTRL=y
 161 +CONFIG_PWM_ROCKCHIP=y
 162 +CONFIG_SPL_RAM=y
 163 +CONFIG_BAUDRATE=1500000
 164 +CONFIG_DEBUG_UART_SHIFT=2
 165 +CONFIG_SYS_NS16550_MEM32=y
 166 +CONFIG_SYSRESET=y
 167 +CONFIG_USB=y
 168 +CONFIG_USB_XHCI_HCD=y
 169 +CONFIG_USB_EHCI_HCD=y
 170 +CONFIG_USB_EHCI_GENERIC=y
 171 +CONFIG_USB_OHCI_HCD=y
 172 +CONFIG_USB_OHCI_GENERIC=y
 173 +CONFIG_USB_DWC3=y
 174 +CONFIG_USB_DWC3_GENERIC=y
 175 +CONFIG_USB_GADGET=y
 176 +CONFIG_USB_GADGET_DOWNLOAD=y
 177 +CONFIG_USB_FUNCTION_ROCKUSB=y
 178 +CONFIG_ERRNO_STR=y
 179 --- /dev/null
 180 +++ b/include/configs/nanopi-r6s-rk3588s.h
 181 @@ -0,0 +1,12 @@
 182 +/* SPDX-License-Identifier: GPL-2.0+ */
 183 +
 184 +#ifndef __NANOPI_R6S_RK3588S_H
 185 +#define __NANOPI_R6S_RK3588S_H
 186 +
 187 +#define ROCKCHIP_DEVICE_SETTINGS \
 188 +               "stdout=serial,vidconsole\0" \
 189 +               "stderr=serial,vidconsole\0"
 190 +
 191 +#include <configs/rk3588_common.h>
 192 +
 193 +#endif /* __NANOPI_R6S_RK3588S_H */