projects / openwrt / staging / neocturne.git / blob
? search:


5bbdc6d0e0a0f319ec653bd89757d0abd6282755
[openwrt/staging/neocturne.git] /
1 From 8f7db12efc189eedd196ed8d053236ce27add484 Mon Sep 17 00:00:00 2001
2 From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <arinc.unal@arinc9.com>
3 Date: Mon, 22 Jan 2024 08:35:54 +0300
4 Subject: [PATCH 07/30] net: dsa: mt7530: store port 5 SGMII capability of
5 MT7531
6 MIME-Version: 1.0
7 Content-Type: text/plain; charset=UTF-8
8 Content-Transfer-Encoding: 8bit
9
10 Introduce the p5_sgmii field to store the information for whether port 5
11 has got SGMII or not. Instead of reading the MT7531_TOP_SIG_SR register
12 multiple times, the register will be read once and the value will be
13 stored on the p5_sgmii field. This saves unnecessary reads of the
14 register.
15
16 Move the comment about MT7531AE and MT7531BE to mt7531_setup(), where the
17 switch is identified.
18
19 Get rid of mt7531_dual_sgmii_supported() now that priv->p5_sgmii stores the
20 information. Address the code where mt7531_dual_sgmii_supported() is used.
21
22 Get rid of mt7531_is_rgmii_port() which just prints the opposite of
23 priv->p5_sgmii.
24
25 Instead of calling mt7531_pll_setup() then returning, do not call it if
26 port 5 is SGMII.
27
28 Remove P5_INTF_SEL_GMAC5_SGMII. The p5_interface_select enum is supposed to
29 represent the mode that port 5 is being used in, not the hardware
30 information of port 5. Set p5_intf_sel to P5_INTF_SEL_GMAC5 instead, if
31 port 5 is not dsa_is_unused_port().
32
33 Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
34 Acked-by: Daniel Golle <daniel@makrotopia.org>
35 Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
36 Link: https://lore.kernel.org/r/20240122-for-netnext-mt7530-improvements-1-v3-3-042401f2b279@arinc9.com
37 Signed-off-by: Jakub Kicinski <kuba@kernel.org>
38 ---
39 drivers/net/dsa/mt7530-mdio.c | 7 ++---
40 drivers/net/dsa/mt7530.c | 48 ++++++++++++-----------------------
41 drivers/net/dsa/mt7530.h | 6 +++--
42 3 files changed, 22 insertions(+), 39 deletions(-)
43
44 --- a/drivers/net/dsa/mt7530-mdio.c
45 +++ b/drivers/net/dsa/mt7530-mdio.c
46 @@ -81,17 +81,14 @@ static const struct regmap_bus mt7530_re
47 };
48
49 static int
50 -mt7531_create_sgmii(struct mt7530_priv *priv, bool dual_sgmii)
51 +mt7531_create_sgmii(struct mt7530_priv *priv)
52 {
53 struct regmap_config *mt7531_pcs_config[2] = {};
54 struct phylink_pcs *pcs;
55 struct regmap *regmap;
56 int i, ret = 0;
57
58 - /* MT7531AE has two SGMII units for port 5 and port 6
59 - * MT7531BE has only one SGMII unit for port 6
60 - */
61 - for (i = dual_sgmii ? 0 : 1; i < 2; i++) {
62 + for (i = priv->p5_sgmii ? 0 : 1; i < 2; i++) {
63 mt7531_pcs_config[i] = devm_kzalloc(priv->dev,
64 sizeof(struct regmap_config),
65 GFP_KERNEL);
66 --- a/drivers/net/dsa/mt7530.c
67 +++ b/drivers/net/dsa/mt7530.c
68 @@ -487,15 +487,6 @@ mt7530_pad_clk_setup(struct dsa_switch *
69 return 0;
70 }
71
72 -static bool mt7531_dual_sgmii_supported(struct mt7530_priv *priv)
73 -{
74 - u32 val;
75 -
76 - val = mt7530_read(priv, MT7531_TOP_SIG_SR);
77 -
78 - return (val & PAD_DUAL_SGMII_EN) != 0;
79 -}
80 -
81 static int
82 mt7531_pad_setup(struct dsa_switch *ds, phy_interface_t interface)
83 {
84 @@ -510,9 +501,6 @@ mt7531_pll_setup(struct mt7530_priv *pri
85 u32 xtal;
86 u32 val;
87
88 - if (mt7531_dual_sgmii_supported(priv))
89 - return;
90 -
91 val = mt7530_read(priv, MT7531_CREV);
92 top_sig = mt7530_read(priv, MT7531_TOP_SIG_SR);
93 hwstrap = mt7530_read(priv, MT7531_HWTRAP);
94 @@ -920,8 +908,6 @@ static const char *p5_intf_modes(unsigne
95 return "PHY P4";
96 case P5_INTF_SEL_GMAC5:
97 return "GMAC5";
98 - case P5_INTF_SEL_GMAC5_SGMII:
99 - return "GMAC5_SGMII";
100 default:
101 return "unknown";
102 }
103 @@ -2524,6 +2510,12 @@ mt7531_setup(struct dsa_switch *ds)
104 return -ENODEV;
105 }
106
107 + /* MT7531AE has got two SGMII units. One for port 5, one for port 6.
108 + * MT7531BE has got only one SGMII unit which is for port 6.
109 + */
110 + val = mt7530_read(priv, MT7531_TOP_SIG_SR);
111 + priv->p5_sgmii = !!(val & PAD_DUAL_SGMII_EN);
112 +
113 /* all MACs must be forced link-down before sw reset */
114 for (i = 0; i < MT7530_NUM_PORTS; i++)
115 mt7530_write(priv, MT7530_PMCR_P(i), MT7531_FORCE_LNK);
116 @@ -2533,21 +2525,18 @@ mt7531_setup(struct dsa_switch *ds)
117 SYS_CTRL_PHY_RST | SYS_CTRL_SW_RST |
118 SYS_CTRL_REG_RST);
119
120 - mt7531_pll_setup(priv);
121 -
122 - if (mt7531_dual_sgmii_supported(priv)) {
123 - priv->p5_intf_sel = P5_INTF_SEL_GMAC5_SGMII;
124 -
125 + if (!priv->p5_sgmii) {
126 + mt7531_pll_setup(priv);
127 + } else {
128 /* Let ds->slave_mii_bus be able to access external phy. */
129 mt7530_rmw(priv, MT7531_GPIO_MODE1, MT7531_GPIO11_RG_RXD2_MASK,
130 MT7531_EXT_P_MDC_11);
131 mt7530_rmw(priv, MT7531_GPIO_MODE1, MT7531_GPIO12_RG_RXD3_MASK,
132 MT7531_EXT_P_MDIO_12);
133 - } else {
134 - priv->p5_intf_sel = P5_INTF_SEL_GMAC5;
135 }
136 - dev_dbg(ds->dev, "P5 support %s interface\n",
137 - p5_intf_modes(priv->p5_intf_sel));
138 +
139 + if (!dsa_is_unused_port(ds, 5))
140 + priv->p5_intf_sel = P5_INTF_SEL_GMAC5;
141
142 mt7530_rmw(priv, MT7531_GPIO_MODE0, MT7531_GPIO0_MASK,
143 MT7531_GPIO0_INTERRUPT);
144 @@ -2607,11 +2596,6 @@ static void mt7530_mac_port_get_caps(str
145 }
146 }
147
148 -static bool mt7531_is_rgmii_port(struct mt7530_priv *priv, u32 port)
149 -{
150 - return (port == 5) && (priv->p5_intf_sel != P5_INTF_SEL_GMAC5_SGMII);
151 -}
152 -
153 static void mt7531_mac_port_get_caps(struct dsa_switch *ds, int port,
154 struct phylink_config *config)
155 {
156 @@ -2624,7 +2608,7 @@ static void mt7531_mac_port_get_caps(str
157 break;
158
159 case 5: /* 2nd cpu port supports either rgmii or sgmii/8023z */
160 - if (mt7531_is_rgmii_port(priv, port)) {
161 + if (!priv->p5_sgmii) {
162 phy_interface_set_rgmii(config->supported_interfaces);
163 break;
164 }
165 @@ -2691,7 +2675,7 @@ static int mt7531_rgmii_setup(struct mt7
166 {
167 u32 val;
168
169 - if (!mt7531_is_rgmii_port(priv, port)) {
170 + if (priv->p5_sgmii) {
171 dev_err(priv->dev, "RGMII mode is not available for port %d\n",
172 port);
173 return -EINVAL;
174 @@ -2934,7 +2918,7 @@ mt7531_cpu_port_config(struct dsa_switch
175
176 switch (port) {
177 case 5:
178 - if (mt7531_is_rgmii_port(priv, port))
179 + if (!priv->p5_sgmii)
180 interface = PHY_INTERFACE_MODE_RGMII;
181 else
182 interface = PHY_INTERFACE_MODE_2500BASEX;
183 @@ -3086,7 +3070,7 @@ mt753x_setup(struct dsa_switch *ds)
184 mt7530_free_irq_common(priv);
185
186 if (priv->create_sgmii) {
187 - ret = priv->create_sgmii(priv, mt7531_dual_sgmii_supported(priv));
188 + ret = priv->create_sgmii(priv);
189 if (ret && priv->irq)
190 mt7530_free_irq(priv);
191 }
192 --- a/drivers/net/dsa/mt7530.h
193 +++ b/drivers/net/dsa/mt7530.h
194 @@ -707,7 +707,6 @@ enum p5_interface_select {
195 P5_INTF_SEL_PHY_P0,
196 P5_INTF_SEL_PHY_P4,
197 P5_INTF_SEL_GMAC5,
198 - P5_INTF_SEL_GMAC5_SGMII,
199 };
200
201 struct mt7530_priv;
202 @@ -776,6 +775,8 @@ struct mt753x_info {
203 * registers
204 * @p6_interface Holding the current port 6 interface
205 * @p5_intf_sel: Holding the current port 5 interface select
206 + * @p5_sgmii: Flag for distinguishing if port 5 of the MT7531 switch
207 + * has got SGMII
208 * @irq: IRQ number of the switch
209 * @irq_domain: IRQ domain of the switch irq_chip
210 * @irq_enable: IRQ enable bits, synced to SYS_INT_EN
211 @@ -797,6 +798,7 @@ struct mt7530_priv {
212 phy_interface_t p6_interface;
213 phy_interface_t p5_interface;
214 enum p5_interface_select p5_intf_sel;
215 + bool p5_sgmii;
216 u8 mirror_rx;
217 u8 mirror_tx;
218 struct mt7530_port ports[MT7530_NUM_PORTS];
219 @@ -806,7 +808,7 @@ struct mt7530_priv {
220 int irq;
221 struct irq_domain *irq_domain;
222 u32 irq_enable;
223 - int (*create_sgmii)(struct mt7530_priv *priv, bool dual_sgmii);
224 + int (*create_sgmii)(struct mt7530_priv *priv);
225 u8 active_cpu_ports;
226 };
227
Staging tree of Matthias Schiffer