git.openwrt.org Git - openwrt/staging/blogic.git/blob

   1 From 022a11062261dc4703da846d3bf4d194ef6bebf5 Mon Sep 17 00:00:00 2001
   2 From: Vladimir Oltean <vladimir.oltean@nxp.com>
   3 Date: Tue, 29 Nov 2022 16:12:11 +0200
   4 Subject: [PATCH 04/14] net: dpaa2: replace dpaa2_mac_is_type_fixed() with
   5  dpaa2_mac_is_type_phy()
   6
   7 dpaa2_mac_is_type_fixed() is a header with no implementation and no
   8 callers, which is referenced from the documentation though. It can be
   9 deleted.
  10
  11 On the other hand, it would be useful to reuse the code between
  12 dpaa2_eth_is_type_phy() and dpaa2_switch_port_is_type_phy(). That common
  13 code should be called dpaa2_mac_is_type_phy(), so let's create that.
  14
  15 The removal and the addition are merged into the same patch because,
  16 in fact, is_type_phy() is the logical opposite of is_type_fixed().
  17
  18 Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
  19 Reviewed-by: Andrew Lunn <andrew@lunn.ch>
  20 Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com>
  21 Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com>
  22 Signed-off-by: Paolo Abeni <pabeni@redhat.com>
  23 ---
  24  .../ethernet/freescale/dpaa2/mac-phy-support.rst       |  9 ++++++---
  25  drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h       |  7 +------
  26  drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.h       | 10 ++++++++--
  27  drivers/net/ethernet/freescale/dpaa2/dpaa2-switch.h    |  7 +------
  28  4 files changed, 16 insertions(+), 17 deletions(-)
  29
  30 --- a/Documentation/networking/device_drivers/ethernet/freescale/dpaa2/mac-phy-support.rst
  31 +++ b/Documentation/networking/device_drivers/ethernet/freescale/dpaa2/mac-phy-support.rst
  32 @@ -181,10 +181,13 @@ when necessary using the below listed AP
  33   - int dpaa2_mac_connect(struct dpaa2_mac *mac);
  34   - void dpaa2_mac_disconnect(struct dpaa2_mac *mac);
  35
  36 -A phylink integration is necessary only when the partner DPMAC is not of TYPE_FIXED.
  37 -One can check for this condition using the below API::
  38 +A phylink integration is necessary only when the partner DPMAC is not of
  39 +``TYPE_FIXED``. This means it is either of ``TYPE_PHY``, or of
  40 +``TYPE_BACKPLANE`` (the difference being the two that in the ``TYPE_BACKPLANE``
  41 +mode, the MC firmware does not access the PCS registers). One can check for
  42 +this condition using the following helper::
  43
  44 - - bool dpaa2_mac_is_type_fixed(struct fsl_mc_device *dpmac_dev,struct fsl_mc_io *mc_io);
  45 + - static inline bool dpaa2_mac_is_type_phy(struct dpaa2_mac *mac);
  46
  47  Before connection to a MAC, the caller must allocate and populate the
  48  dpaa2_mac structure with the associated net_device, a pointer to the MC portal
  49 --- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h
  50 +++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.h
  51 @@ -733,12 +733,7 @@ static inline unsigned int dpaa2_eth_rx_
  52
  53  static inline bool dpaa2_eth_is_type_phy(struct dpaa2_eth_priv *priv)
  54  {
  55 -       if (priv->mac &&
  56 -           (priv->mac->attr.link_type == DPMAC_LINK_TYPE_PHY ||
  57 -            priv->mac->attr.link_type == DPMAC_LINK_TYPE_BACKPLANE))
  58 -               return true;
  59 -
  60 -       return false;
  61 +       return dpaa2_mac_is_type_phy(priv->mac);
  62  }
  63
  64  static inline bool dpaa2_eth_has_mac(struct dpaa2_eth_priv *priv)
  65 --- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.h
  66 +++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.h
  67 @@ -30,8 +30,14 @@ struct dpaa2_mac {
  68         struct phy *serdes_phy;
  69  };
  70
  71 -bool dpaa2_mac_is_type_fixed(struct fsl_mc_device *dpmac_dev,
  72 -                            struct fsl_mc_io *mc_io);
  73 +static inline bool dpaa2_mac_is_type_phy(struct dpaa2_mac *mac)
  74 +{
  75 +       if (!mac)
  76 +               return false;
  77 +
  78 +       return mac->attr.link_type == DPMAC_LINK_TYPE_PHY ||
  79 +              mac->attr.link_type == DPMAC_LINK_TYPE_BACKPLANE;
  80 +}
  81
  82  int dpaa2_mac_open(struct dpaa2_mac *mac);
  83
  84 --- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-switch.h
  85 +++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-switch.h
  86 @@ -230,12 +230,7 @@ static inline bool dpaa2_switch_supports
  87  static inline bool
  88  dpaa2_switch_port_is_type_phy(struct ethsw_port_priv *port_priv)
  89  {
  90 -       if (port_priv->mac &&
  91 -           (port_priv->mac->attr.link_type == DPMAC_LINK_TYPE_PHY ||
  92 -            port_priv->mac->attr.link_type == DPMAC_LINK_TYPE_BACKPLANE))
  93 -               return true;
  94 -
  95 -       return false;
  96 +       return dpaa2_mac_is_type_phy(port_priv->mac);
  97  }
  98
  99  static inline bool dpaa2_switch_port_has_mac(struct ethsw_port_priv *port_priv)