git.openwrt.org Git - openwrt/staging/ldir.git/blob

   1 From ca49d3e4820704bfc3d2b48f59238d26a584602d Mon Sep 17 00:00:00 2001
   2 From: Alex Marginean <alexandru.marginean@nxp.com>
   3 Date: Fri, 20 Sep 2019 19:37:19 +0300
   4 Subject: [PATCH] drivers: net: phy: aquantia: enable USX AN for USXGMII
   5  protocol
   6
   7 Depending on FW defaults USX AN in AQR PHY must be explicitly enabled when
   8 using USXGMII.  Enable it based on interface type.
   9
  10 Signed-off-by: Alex Marginean <alexandru.marginean@nxp.com>
  11 ---
  12  drivers/net/phy/aquantia_main.c | 7 +++++++
  13  1 file changed, 7 insertions(+)
  14
  15 --- a/drivers/net/phy/aquantia_main.c
  16 +++ b/drivers/net/phy/aquantia_main.c
  17 @@ -33,6 +33,9 @@
  18  #define MDIO_PHYXS_VEND_IF_STATUS_TYPE_SGMII   6
  19  #define MDIO_PHYXS_VEND_IF_STATUS_TYPE_OCSGMII 10
  20
  21 +#define MDIO_PHYXS_VEND_PROV2                  0xC441
  22 +#define MDIO_PHYXS_VEND_PROV2_USX_AN           BIT(3)
  23 +
  24  #define MDIO_AN_VEND_PROV                      0xc400
  25  #define MDIO_AN_VEND_PROV_1000BASET_FULL       BIT(15)
  26  #define MDIO_AN_VEND_PROV_1000BASET_HALF       BIT(14)
  27 @@ -310,6 +313,10 @@ static int aqr_config_aneg_set_prot(stru
  28                               aquantia_syscfg[if_type].syscfg);
  29         }
  30
  31 +       if (if_type == PHY_INTERFACE_MODE_USXGMII)
  32 +               phy_write_mmd(phydev, MDIO_MMD_PHYXS, MDIO_PHYXS_VEND_PROV2,
  33 +                             MDIO_PHYXS_VEND_PROV2_USX_AN);
  34 +
  35         /* wake PHY back up */
  36         phy_write_mmd(phydev, MDIO_MMD_VEND1, AQUANTIA_VND1_GLOBAL_SC, 0);
  37         mdelay(10);