git.openwrt.org Git - openwrt/staging/luka.git/blob

   1 From 2e2105a1578172eaf61e3b59a2c10c4fe04c21b9 Mon Sep 17 00:00:00 2001
   2 From: Dan Haab <riproute@gmail.com>
   3 Date: Fri, 4 May 2018 10:08:43 -0600
   4 Subject: [PATCH] ARM: dts: BCM5301X: Add DT for Luxul XWR-3150 V1
   5 MIME-Version: 1.0
   6 Content-Type: text/plain; charset=UTF-8
   7 Content-Transfer-Encoding: 8bit
   8
   9 Luxul XWR-3150 is a wireless router similar to the XWR-3100 except:
  10 1) It has more RAM
  11 2) Its NAND controller in running in BCH8 mode
  12 3) LAN ports LEDs are hardware controlled
  13
  14 Signed-off-by: Dan Haab <dan.haab@luxul.com>
  15 Acked-by: Rafał Miłecki <rafal@milecki.pl>
  16 Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
  17 ---
  18  arch/arm/boot/dts/Makefile                       |  1 +
  19  arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts | 77 ++++++++++++++++++++++++
  20  2 files changed, 78 insertions(+)
  21  create mode 100644 arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
  22
  23 --- a/arch/arm/boot/dts/Makefile
  24 +++ b/arch/arm/boot/dts/Makefile
  25 @@ -104,6 +104,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
  26         bcm47094-luxul-abr-4500.dtb \
  27         bcm47094-luxul-xbr-4500.dtb \
  28         bcm47094-luxul-xwr-3100.dtb \
  29 +       bcm47094-luxul-xwr-3150-v1.dtb \
  30         bcm47094-netgear-r8500.dtb \
  31         bcm94708.dtb \
  32         bcm94709.dtb \
  33 --- /dev/null
  34 +++ b/arch/arm/boot/dts/bcm47094-luxul-xwr-3150-v1.dts
  35 @@ -0,0 +1,77 @@
  36 +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
  37 +/*
  38 + * Copyright 2018 Luxul Inc.
  39 + */
  40 +
  41 +/dts-v1/;
  42 +
  43 +#include "bcm47094.dtsi"
  44 +#include "bcm5301x-nand-cs0-bch8.dtsi"
  45 +
  46 +/ {
  47 +       compatible = "luxul,xwr-3150-v1", "brcm,bcm47094", "brcm,bcm4708";
  48 +       model = "Luxul XWR-3150 V1";
  49 +
  50 +       chosen {
  51 +               bootargs = "earlycon";
  52 +       };
  53 +
  54 +       memory {
  55 +               reg = <0x00000000 0x08000000
  56 +                      0x88000000 0x18000000>;
  57 +       };
  58 +
  59 +       leds {
  60 +               compatible = "gpio-leds";
  61 +
  62 +               power   {
  63 +                       label = "bcm53xx:green:power";
  64 +                       gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
  65 +                       linux,default-trigger = "default-on";
  66 +               };
  67 +
  68 +               usb3    {
  69 +                       label = "bcm53xx:green:usb3";
  70 +                       gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
  71 +                       trigger-sources = <&ohci_port1>, <&ehci_port1>,
  72 +                                         <&xhci_port1>;
  73 +                       linux,default-trigger = "usbport";
  74 +               };
  75 +
  76 +               status  {
  77 +                       label = "bcm53xx:green:status";
  78 +                       gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
  79 +                       linux,default-trigger = "timer";
  80 +               };
  81 +
  82 +               2ghz {
  83 +                       label = "bcm53xx:green:2ghz";
  84 +                       gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
  85 +               };
  86 +
  87 +               5ghz {
  88 +                       label = "bcm53xx:green:5ghz";
  89 +                       gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
  90 +               };
  91 +       };
  92 +
  93 +       gpio-keys {
  94 +               compatible = "gpio-keys";
  95 +               #address-cells = <1>;
  96 +               #size-cells = <0>;
  97 +
  98 +               restart {
  99 +                       label = "Reset";
 100 +                       linux,code = <KEY_RESTART>;
 101 +                       gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
 102 +               };
 103 +       };
 104 +};
 105 +
 106 +&usb3 {
 107 +       vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
 108 +};
 109 +
 110 +&spi_nor {
 111 +       status = "okay";
 112 +};