git.openwrt.org Git - openwrt/staging/pepe2k.git/blob

   1 From 8b0c59c622dc4dab970ec63264fb5b152944ac80 Mon Sep 17 00:00:00 2001
   2 From: Arnd Bergmann <arnd@arndb.de>
   3 Date: Thu, 23 Dec 2021 00:17:17 +0100
   4 Subject: [PATCH] Revert "ARM: dts: BCM5301X: define RTL8365MB switch on Asus
   5  RT-AC88U"
   6
   7 This reverts commit 3d2d52a0d1835b56f6bd67d268f6c39df0e41692, it caused
   8 a build regression:
   9
  10 arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts:109.4-14: Warning (reg_format): /switch/ports:reg: property has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
  11 arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dtb: Warning (pci_device_reg): Failed prerequisite 'reg_format'
  12 arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dtb: Warning (pci_device_bus_num): Failed prerequisite 'reg_format'
  13 arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dtb: Warning (i2c_bus_reg): Failed prerequisite 'reg_format'
  14 arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dtb: Warning (spi_bus_reg): Failed prerequisite 'reg_format'
  15 arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts:106.9-149.5: Warning (avoid_default_addr_size): /switch/ports: Relying on default #address-cells value
  16 arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts:106.9-149.5: Warning (avoid_default_addr_size): /switch/ports: Relying on default #size-cells value
  17
  18 Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
  19 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
  20 ---
  21  arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts | 77 --------------------
  22  1 file changed, 77 deletions(-)
  23
  24 --- a/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts
  25 +++ b/arch/arm/boot/dts/bcm47094-asus-rt-ac88u.dts
  26 @@ -93,83 +93,6 @@
  27                         gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
  28                 };
  29         };
  30 -
  31 -       switch {
  32 -               compatible = "realtek,rtl8365mb";
  33 -               /* 7 = MDIO (has input reads), 6 = MDC (clock, output only) */
  34 -               mdc-gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
  35 -               mdio-gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
  36 -               reset-gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
  37 -               realtek,disable-leds;
  38 -               dsa,member = <1 0>;
  39 -
  40 -               ports {
  41 -                       #address-cells = <1>;
  42 -                       #size-cells = <0>;
  43 -                       reg = <0>;
  44 -
  45 -                       port@0 {
  46 -                               reg = <0>;
  47 -                               label = "lan5";
  48 -                               phy-handle = <&ethphy0>;
  49 -                       };
  50 -
  51 -                       port@1 {
  52 -                               reg = <1>;
  53 -                               label = "lan6";
  54 -                               phy-handle = <&ethphy1>;
  55 -                       };
  56 -
  57 -                       port@2 {
  58 -                               reg = <2>;
  59 -                               label = "lan7";
  60 -                               phy-handle = <&ethphy2>;
  61 -                       };
  62 -
  63 -                       port@3 {
  64 -                               reg = <3>;
  65 -                               label = "lan8";
  66 -                               phy-handle = <&ethphy3>;
  67 -                       };
  68 -
  69 -                       port@6 {
  70 -                               reg = <6>;
  71 -                               label = "cpu";
  72 -                               ethernet = <&sw0_p5>;
  73 -                               phy-mode = "rgmii";
  74 -                               tx-internal-delay-ps = <2000>;
  75 -                               rx-internal-delay-ps = <2100>;
  76 -
  77 -                               fixed-link {
  78 -                                       speed = <1000>;
  79 -                                       full-duplex;
  80 -                                       pause;
  81 -                               };
  82 -                       };
  83 -               };
  84 -
  85 -               mdio {
  86 -                       compatible = "realtek,smi-mdio";
  87 -                       #address-cells = <1>;
  88 -                       #size-cells = <0>;
  89 -
  90 -                       ethphy0: ethernet-phy@0 {
  91 -                               reg = <0>;
  92 -                       };
  93 -
  94 -                       ethphy1: ethernet-phy@1 {
  95 -                               reg = <1>;
  96 -                       };
  97 -
  98 -                       ethphy2: ethernet-phy@2 {
  99 -                               reg = <2>;
 100 -                       };
 101 -
 102 -                       ethphy3: ethernet-phy@3 {
 103 -                               reg = <3>;
 104 -                       };
 105 -               };
 106 -       };
 107  };
 108
 109  &srab {