git.openwrt.org Git - openwrt/staging/mans0n.git/blob

   1 From 2d6edad4b2da1991f74e7b02053eeb4a043b887f Mon Sep 17 00:00:00 2001
   2 From: Arend Van Spriel <arend.vanspriel@broadcom.com>
   3 Date: Tue, 20 Feb 2018 00:14:25 +0100
   4 Subject: [PATCH] brcmfmac: remove duplicate pointer variable from
   5  brcmf_sdio_firmware_callback()
   6
   7 In brcmf_sdio_firmware_callback() two pointer variables were used
   8 pointing to the same construct. Get rid of sdiodev variable.
   9
  10 Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
  11 Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
  12 ---
  13  .../wireless/broadcom/brcm80211/brcmfmac/sdio.c    | 37 +++++++++++-----------
  14  1 file changed, 18 insertions(+), 19 deletions(-)
  15
  16 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
  17 +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
  18 @@ -4039,9 +4039,8 @@ static void brcmf_sdio_firmware_callback
  19                                          void *nvram, u32 nvram_len)
  20  {
  21         struct brcmf_bus *bus_if = dev_get_drvdata(dev);
  22 -       struct brcmf_sdio_dev *sdiodev = bus_if->bus_priv.sdio;
  23 -       struct brcmf_sdio *bus = sdiodev->bus;
  24 -       struct brcmf_sdio_dev *sdiod = bus->sdiodev;
  25 +       struct brcmf_sdio_dev *sdiod = bus_if->bus_priv.sdio;
  26 +       struct brcmf_sdio *bus = sdiod->bus;
  27         struct brcmf_core *core = bus->sdio_core;
  28         u8 saveclk;
  29
  30 @@ -4061,7 +4060,7 @@ static void brcmf_sdio_firmware_callback
  31         bus->sdcnt.tickcnt = 0;
  32         brcmf_sdio_wd_timer(bus, true);
  33
  34 -       sdio_claim_host(sdiodev->func1);
  35 +       sdio_claim_host(sdiod->func1);
  36
  37         /* Make sure backplane clock is on, needed to generate F2 interrupt */
  38         brcmf_sdio_clkctl(bus, CLK_AVAIL, false);
  39 @@ -4069,9 +4068,9 @@ static void brcmf_sdio_firmware_callback
  40                 goto release;
  41
  42         /* Force clocks on backplane to be sure F2 interrupt propagates */
  43 -       saveclk = brcmf_sdiod_readb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR, &err);
  44 +       saveclk = brcmf_sdiod_readb(sdiod, SBSDIO_FUNC1_CHIPCLKCSR, &err);
  45         if (!err) {
  46 -               brcmf_sdiod_writeb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
  47 +               brcmf_sdiod_writeb(sdiod, SBSDIO_FUNC1_CHIPCLKCSR,
  48                                    (saveclk | SBSDIO_FORCE_HT), &err);
  49         }
  50         if (err) {
  51 @@ -4083,7 +4082,7 @@ static void brcmf_sdio_firmware_callback
  52         brcmf_sdiod_writel(sdiod, core->base + SD_REG(tosbmailboxdata),
  53                            SDPCM_PROT_VERSION << SMB_DATA_VERSION_SHIFT, NULL);
  54
  55 -       err = sdio_enable_func(sdiodev->func2);
  56 +       err = sdio_enable_func(sdiod->func2);
  57
  58         brcmf_dbg(INFO, "enable F2: err=%d\n", err);
  59
  60 @@ -4095,10 +4094,10 @@ static void brcmf_sdio_firmware_callback
  61                                    bus->hostintmask, NULL);
  62
  63
  64 -               brcmf_sdiod_writeb(sdiodev, SBSDIO_WATERMARK, 8, &err);
  65 +               brcmf_sdiod_writeb(sdiod, SBSDIO_WATERMARK, 8, &err);
  66         } else {
  67                 /* Disable F2 again */
  68 -               sdio_disable_func(sdiodev->func2);
  69 +               sdio_disable_func(sdiod->func2);
  70                 goto release;
  71         }
  72
  73 @@ -4106,7 +4105,7 @@ static void brcmf_sdio_firmware_callback
  74                 brcmf_sdio_sr_init(bus);
  75         } else {
  76                 /* Restore previous clock setting */
  77 -               brcmf_sdiod_writeb(sdiodev, SBSDIO_FUNC1_CHIPCLKCSR,
  78 +               brcmf_sdiod_writeb(sdiod, SBSDIO_FUNC1_CHIPCLKCSR,
  79                                    saveclk, &err);
  80         }
  81
  82 @@ -4114,7 +4113,7 @@ static void brcmf_sdio_firmware_callback
  83                 /* Allow full data communication using DPC from now on. */
  84                 brcmf_sdiod_change_state(bus->sdiodev, BRCMF_SDIOD_DATA);
  85
  86 -               err = brcmf_sdiod_intr_register(sdiodev);
  87 +               err = brcmf_sdiod_intr_register(sdiod);
  88                 if (err != 0)
  89                         brcmf_err("intr register failed:%d\n", err);
  90         }
  91 @@ -4123,16 +4122,16 @@ static void brcmf_sdio_firmware_callback
  92         if (err != 0)
  93                 brcmf_sdio_clkctl(bus, CLK_NONE, false);
  94
  95 -       sdio_release_host(sdiodev->func1);
  96 +       sdio_release_host(sdiod->func1);
  97
  98         /* Assign bus interface call back */
  99 -       sdiodev->bus_if->dev = sdiodev->dev;
 100 -       sdiodev->bus_if->ops = &brcmf_sdio_bus_ops;
 101 -       sdiodev->bus_if->chip = bus->ci->chip;
 102 -       sdiodev->bus_if->chiprev = bus->ci->chiprev;
 103 +       sdiod->bus_if->dev = sdiod->dev;
 104 +       sdiod->bus_if->ops = &brcmf_sdio_bus_ops;
 105 +       sdiod->bus_if->chip = bus->ci->chip;
 106 +       sdiod->bus_if->chiprev = bus->ci->chiprev;
 107
 108         /* Attach to the common layer, reserve hdr space */
 109 -       err = brcmf_attach(sdiodev->dev, sdiodev->settings);
 110 +       err = brcmf_attach(sdiod->dev, sdiod->settings);
 111         if (err != 0) {
 112                 brcmf_err("brcmf_attach failed\n");
 113                 goto fail;
 114 @@ -4142,10 +4141,10 @@ static void brcmf_sdio_firmware_callback
 115         return;
 116
 117  release:
 118 -       sdio_release_host(sdiodev->func1);
 119 +       sdio_release_host(sdiod->func1);
 120  fail:
 121         brcmf_dbg(TRACE, "failed: dev=%s, err=%d\n", dev_name(dev), err);
 122 -       device_release_driver(&sdiodev->func2->dev);
 123 +       device_release_driver(&sdiod->func2->dev);
 124         device_release_driver(dev);
 125  }
 126