projects / openwrt / openwrt.git / blob
? search:


38ec21f52f95211c562dfaa2c6c65055eda30dd9
[openwrt/openwrt.git] /
1 From: Sebastian Gottschall <s.gottschall@newmedia-net.de>
2
3 Adds LED and GPIO Control support for 988x, 9887, 9888, 99x0, 9984 based
4 chipsets with on chipset connected led's using WMI Firmware API. The LED
5 device will get available named as "ath10k-phyX" at sysfs and can be controlled
6 with various triggers. adds also debugfs interface for gpio control.
7
8 This patch is specific for OpenWRt base, as is use old backported package
9 with old wireless source. Support for QCA9984 is removed.
10 Reworked to use ath10k-ct custom source
11
12
13 Signed-off-by: Sebastian Gottschall <s.gottschall@dd-wrt.com>
14 Reviewed-by: Steve deRosier <derosier@cal-sierra.com>
15 [kvalo: major reorg and cleanup]
16 Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
17 Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
18 ---
19
20 v13:
21
22 * only compile tested!
23
24 * fix all checkpatch warnings
25
26 * fix commit log
27
28 * sizeof(struct ath10k_gpiocontrol) -> sizeof(*gpio)
29
30 * unsigned -> unsigned int
31
32 * remove GPIOLIB code, that should be added in a separate patch
33
34 * rename gpio.c to leds.c
35
36 * add leds.h
37
38 * rename some functions:
39
40 ath10k_attach_led() -> ath10k_leds_register()
41 ath10k_unregister_led() -> ath10k_leds_unregister()
42 ath10k_reset_led_pin() -> ath10k_leds_start()
43
44 * call ath10k_leds_unregister() before ath10k_thermal_unregister() to preserve ordering
45
46 * call ath10k_leds_start() only from ath10k_core_start() and not from mac.c
47
48 * rename struct ath10k_gpiocontrol as anonymous function under struct
49 ath10k::leds, no need for memory allocation
50
51 * merge ath10k_add_led() to ath10k_attach_led(), which is it's only caller
52
53 * remove #if IS_ENABLED() checks from most of places, memory savings from those were not worth it
54
55 * Kconfig help text improvement and move it lower in the menu, also don't enable it by default
56
57 * switch to set_brightness_blocking() so that the callback can sleep,
58 then no need to use ath10k_wmi_cmd_send_nowait() and can take mutex
59 to access ar->state
60
61 * don't touch ath10k_wmi_pdev_get_temperature()
62
63 * as QCA6174/QCA9377 are not (yet) supported don't add the command to WMI-TLV interface
64
65 * remove debugfs interface, that should be added in another patch
66
67 * cleanup includes
68
69
70 ath10k-4.16/Kconfig | 10 +++
71 ath10k-4.16/Makefile | 1 +
72 ath10k-4.16/core.c | 22 +++++++
73 ath10k-4.16/core.h | 9 ++-
74 ath10k-4.16/hw.h | 1 +
75 ath10k-4.16/leds.c | 103 ++++++++++++++++++++++++++++++
76 ath10k-4.16/leds.h | 45 +++++++++++++
77 ath10k-4.16/mac.c | 1 +
78 ath10k-4.16/wmi-ops.h | 32 ++++++++++
79 ath10k-4.16/wmi-tlv.c | 2 +
80 ath10k-4.16/wmi.c | 54 ++++++++++++++++
81 ath10k-4.16/wmi.h | 35 ++++++++++
82 12 files changed, 314 insertions(+), 1 deletion(-)
83 create mode 100644 ath10k-4.16/leds.c
84 create mode 100644 ath10k-4.16/leds.h
85 --- a/ath10k-4.19/Kconfig
86 +++ b/ath10k-4.19/Kconfig
87 @@ -64,6 +64,16 @@ config ATH10K_DEBUGFS
88
89 If unsure, say Y to make it easier to debug problems.
90
91 +config ATH10K_LEDS
92 + bool "Atheros ath10k LED support"
93 + depends on ATH10K
94 + select MAC80211_LEDS
95 + select LEDS_CLASS
96 + select NEW_LEDS
97 + default y
98 + ---help---
99 + This option is necessary, if you want LED support for chipset connected led pins. If unsure, say N.
100 +
101 config ATH10K_SPECTRAL
102 bool "Atheros ath10k spectral scan support"
103 depends on ATH10K_DEBUGFS
104 --- a/ath10k-4.19/Makefile
105 +++ b/ath10k-4.19/Makefile
106 @@ -19,6 +19,7 @@ ath10k_core-$(CONFIG_ATH10K_SPECTRAL) +=
107 ath10k_core-$(CONFIG_NL80211_TESTMODE) += testmode.o
108 ath10k_core-$(CONFIG_ATH10K_TRACING) += trace.o
109 ath10k_core-$(CONFIG_THERMAL) += thermal.o
110 +ath10k_core-$(CONFIG_ATH10K_LEDS) += leds.o
111 ath10k_core-$(CONFIG_MAC80211_DEBUGFS) += debugfs_sta.o
112 ath10k_core-$(CONFIG_PM) += wow.o
113 ath10k_core-$(CONFIG_DEV_COREDUMP) += coredump.o
114 --- a/ath10k-4.19/core.c
115 +++ b/ath10k-4.19/core.c
116 @@ -35,6 +35,7 @@
117 #include "testmode.h"
118 #include "wmi-ops.h"
119 #include "coredump.h"
120 +#include "leds.h"
121
122 /* Disable ath10k-ct DBGLOG output by default */
123 unsigned int ath10k_debug_mask = ATH10K_DBG_NO_DBGLOG;
124 @@ -72,6 +73,7 @@ static const struct ath10k_hw_params ath
125 .id = QCA988X_HW_2_0_VERSION,
126 .dev_id = QCA988X_2_0_DEVICE_ID,
127 .name = "qca988x hw2.0",
128 + .led_pin = 1,
129 .patch_load_addr = QCA988X_HW_2_0_PATCH_LOAD_ADDR,
130 .uart_pin = 7,
131 .cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_ALL,
132 @@ -137,6 +139,7 @@ static const struct ath10k_hw_params ath
133 .id = QCA9887_HW_1_0_VERSION,
134 .dev_id = QCA9887_1_0_DEVICE_ID,
135 .name = "qca9887 hw1.0",
136 + .led_pin = 1,
137 .patch_load_addr = QCA9887_HW_1_0_PATCH_LOAD_ADDR,
138 .uart_pin = 7,
139 .cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_ALL,
140 @@ -301,6 +304,7 @@ static const struct ath10k_hw_params ath
141 .id = QCA99X0_HW_2_0_DEV_VERSION,
142 .dev_id = QCA99X0_2_0_DEVICE_ID,
143 .name = "qca99x0 hw2.0",
144 + .led_pin = 17,
145 .patch_load_addr = QCA99X0_HW_2_0_PATCH_LOAD_ADDR,
146 .uart_pin = 7,
147 .otp_exe_param = 0x00000700,
148 @@ -339,6 +343,7 @@ static const struct ath10k_hw_params ath
149 .id = QCA9984_HW_1_0_DEV_VERSION,
150 .dev_id = QCA9984_1_0_DEVICE_ID,
151 .name = "qca9984/qca9994 hw1.0",
152 + .led_pin = 17,
153 .patch_load_addr = QCA9984_HW_1_0_PATCH_LOAD_ADDR,
154 .uart_pin = 7,
155 .cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_EACH,
156 @@ -382,6 +387,7 @@ static const struct ath10k_hw_params ath
157 .id = QCA9888_HW_2_0_DEV_VERSION,
158 .dev_id = QCA9888_2_0_DEVICE_ID,
159 .name = "qca9888 hw2.0",
160 + .led_pin = 17,
161 .patch_load_addr = QCA9888_HW_2_0_PATCH_LOAD_ADDR,
162 .uart_pin = 7,
163 .cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_EACH,
164 @@ -3167,6 +3173,10 @@ int ath10k_core_start(struct ath10k *ar,
165 ath10k_wmi_check_apply_board_power_ctl_table(ar);
166 }
167
168 + status = ath10k_leds_start(ar);
169 + if (status)
170 + goto err_hif_stop;
171 +
172 return 0;
173
174 err_hif_stop:
175 @@ -3421,9 +3431,18 @@ static void ath10k_core_register_work(st
176 goto err_spectral_destroy;
177 }
178
179 + status = ath10k_leds_register(ar);
180 + if (status) {
181 + ath10k_err(ar, "could not register leds: %d\n",
182 + status);
183 + goto err_thermal_unregister;
184 + }
185 +
186 set_bit(ATH10K_FLAG_CORE_REGISTERED, &ar->dev_flags);
187 return;
188
189 +err_thermal_unregister:
190 + ath10k_thermal_unregister(ar);
191 err_spectral_destroy:
192 ath10k_spectral_destroy(ar);
193 err_debug_destroy:
194 @@ -3481,6 +3500,8 @@ void ath10k_core_unregister(struct ath10
195 if (!test_bit(ATH10K_FLAG_CORE_REGISTERED, &ar->dev_flags))
196 return;
197
198 + ath10k_leds_unregister(ar);
199 +
200 ath10k_thermal_unregister(ar);
201 /* Stop spectral before unregistering from mac80211 to remove the
202 * relayfs debugfs file cleanly. Otherwise the parent debugfs tree
203 --- a/ath10k-4.19/core.h
204 +++ b/ath10k-4.19/core.h
205 @@ -25,6 +25,7 @@
206 #include <linux/pci.h>
207 #include <linux/uuid.h>
208 #include <linux/time.h>
209 +#include <linux/leds.h>
210
211 #include "htt.h"
212 #include "htc.h"
213 @@ -1137,7 +1138,6 @@ struct ath10k {
214 u32 low_5ghz_chan;
215 u32 high_5ghz_chan;
216 bool ani_enabled;
217 -
218 bool p2p;
219 bool ct_all_pkts_htt; /* CT firmware only: native-wifi for all pkts */
220
221 @@ -1388,6 +1388,13 @@ struct ath10k {
222 } testmode;
223
224 struct {
225 + struct gpio_led wifi_led;
226 + struct led_classdev cdev;
227 + char label[48];
228 + u32 gpio_state_pin;
229 + } leds;
230 +
231 + struct {
232 /* protected by data_lock */
233 u32 fw_crash_counter;
234 u32 fw_warm_reset_counter;
235 --- a/ath10k-4.19/hw.h
236 +++ b/ath10k-4.19/hw.h
237 @@ -508,6 +508,7 @@ struct ath10k_hw_params {
238 const char *name;
239 u32 patch_load_addr;
240 int uart_pin;
241 + int led_pin;
242 u32 otp_exe_param;
243
244 /* Type of hw cycle counter wraparound logic, for more info
245 --- /dev/null
246 +++ b/ath10k-4.19/leds.c
247 @@ -0,0 +1,103 @@
248 +/*
249 + * Copyright (c) 2005-2011 Atheros Communications Inc.
250 + * Copyright (c) 2011-2017 Qualcomm Atheros, Inc.
251 + * Copyright (c) 2018 Sebastian Gottschall <s.gottschall@dd-wrt.com>
252 + * Copyright (c) 2018, The Linux Foundation. All rights reserved.
253 + *
254 + * Permission to use, copy, modify, and/or distribute this software for any
255 + * purpose with or without fee is hereby granted, provided that the above
256 + * copyright notice and this permission notice appear in all copies.
257 + *
258 + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
259 + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
260 + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
261 + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
262 + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
263 + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
264 + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
265 + */
266 +
267 +#include <linux/leds.h>
268 +
269 +#include "core.h"
270 +#include "wmi.h"
271 +#include "wmi-ops.h"
272 +
273 +#include "leds.h"
274 +
275 +static int ath10k_leds_set_brightness_blocking(struct led_classdev *led_cdev,
276 + enum led_brightness brightness)
277 +{
278 + struct ath10k *ar = container_of(led_cdev, struct ath10k,
279 + leds.cdev);
280 + struct gpio_led *led = &ar->leds.wifi_led;
281 +
282 + mutex_lock(&ar->conf_mutex);
283 +
284 + if (ar->state != ATH10K_STATE_ON)
285 + goto out;
286 +
287 + ar->leds.gpio_state_pin = (brightness != LED_OFF) ^ led->active_low;
288 + ath10k_wmi_gpio_output(ar, led->gpio, ar->leds.gpio_state_pin);
289 +
290 +out:
291 + mutex_unlock(&ar->conf_mutex);
292 +
293 + return 0;
294 +}
295 +
296 +int ath10k_leds_start(struct ath10k *ar)
297 +{
298 + if (ar->hw_params.led_pin == 0)
299 + /* leds not supported */
300 + return 0;
301 +
302 + /* under some circumstances, the gpio pin gets reconfigured
303 + * to default state by the firmware, so we need to
304 + * reconfigure it this behaviour has only ben seen on
305 + * QCA9984 and QCA99XX devices so far
306 + */
307 + ath10k_wmi_gpio_config(ar, ar->hw_params.led_pin, 0,
308 + WMI_GPIO_PULL_NONE, WMI_GPIO_INTTYPE_DISABLE);
309 + ath10k_wmi_gpio_output(ar, ar->hw_params.led_pin, 1);
310 +
311 + return 0;
312 +}
313 +
314 +int ath10k_leds_register(struct ath10k *ar)
315 +{
316 + int ret;
317 +
318 + if (ar->hw_params.led_pin == 0)
319 + /* leds not supported */
320 + return 0;
321 +
322 + snprintf(ar->leds.label, sizeof(ar->leds.label), "ath10k-%s",
323 + wiphy_name(ar->hw->wiphy));
324 + ar->leds.wifi_led.active_low = 1;
325 + ar->leds.wifi_led.gpio = ar->hw_params.led_pin;
326 + ar->leds.wifi_led.name = ar->leds.label;
327 + ar->leds.wifi_led.default_state = LEDS_GPIO_DEFSTATE_KEEP;
328 +
329 + ar->leds.cdev.name = ar->leds.label;
330 + ar->leds.cdev.brightness_set_blocking = ath10k_leds_set_brightness_blocking;
331 +
332 + /* FIXME: this assignment doesn't make sense as it's NULL, remove it? */
333 + ar->leds.cdev.default_trigger = ar->leds.wifi_led.default_trigger;
334 +
335 + ret = led_classdev_register(wiphy_dev(ar->hw->wiphy), &ar->leds.cdev);
336 + if (ret)
337 + return ret;
338 +
339 + return 0;
340 +}
341 +
342 +void ath10k_leds_unregister(struct ath10k *ar)
343 +{
344 + if (ar->hw_params.led_pin == 0)
345 + /* leds not supported */
346 + return;
347 +
348 + led_classdev_unregister(&ar->leds.cdev);
349 +}
350 +
351 --- /dev/null
352 +++ b/ath10k-4.19/leds.h
353 @@ -0,0 +1,41 @@
354 +/*
355 + * Copyright (c) 2018, The Linux Foundation. All rights reserved.
356 + *
357 + * Permission to use, copy, modify, and/or distribute this software for any
358 + * purpose with or without fee is hereby granted, provided that the above
359 + * copyright notice and this permission notice appear in all copies.
360 + *
361 + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
362 + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
363 + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
364 + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
365 + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
366 + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
367 + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
368 + */
369 +#ifndef _LEDS_H_
370 +#define _LEDS_H_
371 +
372 +#include "core.h"
373 +
374 +#ifdef CONFIG_ATH10K_LEDS
375 +void ath10k_leds_unregister(struct ath10k *ar);
376 +int ath10k_leds_start(struct ath10k *ar);
377 +int ath10k_leds_register(struct ath10k *ar);
378 +#else
379 +static inline void ath10k_leds_unregister(struct ath10k *ar)
380 +{
381 +}
382 +
383 +static inline int ath10k_leds_start(struct ath10k *ar)
384 +{
385 + return 0;
386 +}
387 +
388 +static inline int ath10k_leds_register(struct ath10k *ar)
389 +{
390 + return 0;
391 +}
392 +
393 +#endif
394 +#endif /* _LEDS_H_ */
395 --- a/ath10k-4.19/mac.c
396 +++ b/ath10k-4.19/mac.c
397 @@ -34,6 +34,7 @@
398 #include "wmi-tlv.h"
399 #include "wmi-ops.h"
400 #include "wow.h"
401 +#include "leds.h"
402
403 /*********/
404 /* Rates */
405 --- a/ath10k-4.19/wmi-ops.h
406 +++ b/ath10k-4.19/wmi-ops.h
407 @@ -218,7 +218,10 @@ struct wmi_ops {
408 struct sk_buff *(*gen_echo)(struct ath10k *ar, u32 value);
409 struct sk_buff *(*gen_pdev_get_tpc_table_cmdid)(struct ath10k *ar,
410 u32 param);
411 + struct sk_buff *(*gen_gpio_config)(struct ath10k *ar, u32 gpio_num,
412 + u32 input, u32 pull_type, u32 intr_mode);
413
414 + struct sk_buff *(*gen_gpio_output)(struct ath10k *ar, u32 gpio_num, u32 set);
415 };
416
417 int ath10k_wmi_cmd_send(struct ath10k *ar, struct sk_buff *skb, u32 cmd_id);
418 @@ -1079,6 +1082,35 @@ ath10k_wmi_force_fw_hang(struct ath10k *
419 return ath10k_wmi_cmd_send(ar, skb, ar->wmi.cmd->force_fw_hang_cmdid);
420 }
421
422 +static inline int ath10k_wmi_gpio_config(struct ath10k *ar, u32 gpio_num,
423 + u32 input, u32 pull_type, u32 intr_mode)
424 +{
425 + struct sk_buff *skb;
426 +
427 + if (!ar->wmi.ops->gen_gpio_config)
428 + return -EOPNOTSUPP;
429 +
430 + skb = ar->wmi.ops->gen_gpio_config(ar, gpio_num, input, pull_type, intr_mode);
431 + if (IS_ERR(skb))
432 + return PTR_ERR(skb);
433 +
434 + return ath10k_wmi_cmd_send(ar, skb, ar->wmi.cmd->gpio_config_cmdid);
435 +}
436 +
437 +static inline int ath10k_wmi_gpio_output(struct ath10k *ar, u32 gpio_num, u32 set)
438 +{
439 + struct sk_buff *skb;
440 +
441 + if (!ar->wmi.ops->gen_gpio_config)
442 + return -EOPNOTSUPP;
443 +
444 + skb = ar->wmi.ops->gen_gpio_output(ar, gpio_num, set);
445 + if (IS_ERR(skb))
446 + return PTR_ERR(skb);
447 +
448 + return ath10k_wmi_cmd_send(ar, skb, ar->wmi.cmd->gpio_output_cmdid);
449 +}
450 +
451 static inline int
452 ath10k_wmi_dbglog_cfg(struct ath10k *ar, u64 module_enable, u32 log_level)
453 {
454 --- a/ath10k-4.19/wmi-tlv.c
455 +++ b/ath10k-4.19/wmi-tlv.c
456 @@ -3976,6 +3976,8 @@ static const struct wmi_ops wmi_tlv_ops
457 .gen_echo = ath10k_wmi_tlv_op_gen_echo,
458 .gen_vdev_spectral_conf = ath10k_wmi_tlv_op_gen_vdev_spectral_conf,
459 .gen_vdev_spectral_enable = ath10k_wmi_tlv_op_gen_vdev_spectral_enable,
460 + /* .gen_gpio_config not implemented */
461 + /* .gen_gpio_output not implemented */
462 };
463
464 static const struct wmi_peer_flags_map wmi_tlv_peer_flags_map = {
465 --- a/ath10k-4.19/wmi.c
466 +++ b/ath10k-4.19/wmi.c
467 @@ -8070,6 +8070,49 @@ ath10k_wmi_op_gen_peer_set_param(struct
468 return skb;
469 }
470
471 +static struct sk_buff *ath10k_wmi_op_gen_gpio_config(struct ath10k *ar,
472 + u32 gpio_num, u32 input,
473 + u32 pull_type, u32 intr_mode)
474 +{
475 + struct wmi_gpio_config_cmd *cmd;
476 + struct sk_buff *skb;
477 +
478 + skb = ath10k_wmi_alloc_skb(ar, sizeof(*cmd));
479 + if (!skb)
480 + return ERR_PTR(-ENOMEM);
481 +
482 + cmd = (struct wmi_gpio_config_cmd *)skb->data;
483 + cmd->pull_type = __cpu_to_le32(pull_type);
484 + cmd->gpio_num = __cpu_to_le32(gpio_num);
485 + cmd->input = __cpu_to_le32(input);
486 + cmd->intr_mode = __cpu_to_le32(intr_mode);
487 +
488 + ath10k_dbg(ar, ATH10K_DBG_WMI, "wmi gpio_config gpio_num 0x%08x input 0x%08x pull_type 0x%08x intr_mode 0x%08x\n",
489 + gpio_num, input, pull_type, intr_mode);
490 +
491 + return skb;
492 +}
493 +
494 +static struct sk_buff *ath10k_wmi_op_gen_gpio_output(struct ath10k *ar,
495 + u32 gpio_num, u32 set)
496 +{
497 + struct wmi_gpio_output_cmd *cmd;
498 + struct sk_buff *skb;
499 +
500 + skb = ath10k_wmi_alloc_skb(ar, sizeof(*cmd));
501 + if (!skb)
502 + return ERR_PTR(-ENOMEM);
503 +
504 + cmd = (struct wmi_gpio_output_cmd *)skb->data;
505 + cmd->gpio_num = __cpu_to_le32(gpio_num);
506 + cmd->set = __cpu_to_le32(set);
507 +
508 + ath10k_dbg(ar, ATH10K_DBG_WMI, "wmi gpio_output gpio_num 0x%08x set 0x%08x\n",
509 + gpio_num, set);
510 +
511 + return skb;
512 +}
513 +
514 static struct sk_buff *
515 ath10k_wmi_op_gen_set_psmode(struct ath10k *ar, u32 vdev_id,
516 enum wmi_sta_ps_mode psmode)
517 @@ -9821,6 +9864,9 @@ static const struct wmi_ops wmi_ops = {
518 .fw_stats_fill = ath10k_wmi_main_op_fw_stats_fill,
519 .get_vdev_subtype = ath10k_wmi_op_get_vdev_subtype,
520 .gen_echo = ath10k_wmi_op_gen_echo,
521 + .gen_gpio_config = ath10k_wmi_op_gen_gpio_config,
522 + .gen_gpio_output = ath10k_wmi_op_gen_gpio_output,
523 +
524 /* .gen_bcn_tmpl not implemented */
525 /* .gen_prb_tmpl not implemented */
526 /* .gen_p2p_go_bcn_ie not implemented */
527 @@ -9891,6 +9937,8 @@ static const struct wmi_ops wmi_10_1_ops
528 .fw_stats_fill = ath10k_wmi_10x_op_fw_stats_fill,
529 .get_vdev_subtype = ath10k_wmi_op_get_vdev_subtype,
530 .gen_echo = ath10k_wmi_op_gen_echo,
531 + .gen_gpio_config = ath10k_wmi_op_gen_gpio_config,
532 + .gen_gpio_output = ath10k_wmi_op_gen_gpio_output,
533 /* .gen_bcn_tmpl not implemented */
534 /* .gen_prb_tmpl not implemented */
535 /* .gen_p2p_go_bcn_ie not implemented */
536 @@ -9969,6 +10017,8 @@ static const struct wmi_ops wmi_10_2_ops
537 .gen_delba_send = ath10k_wmi_op_gen_delba_send,
538 .fw_stats_fill = ath10k_wmi_10x_op_fw_stats_fill,
539 .get_vdev_subtype = ath10k_wmi_op_get_vdev_subtype,
540 + .gen_gpio_config = ath10k_wmi_op_gen_gpio_config,
541 + .gen_gpio_output = ath10k_wmi_op_gen_gpio_output,
542 /* .gen_pdev_enable_adaptive_cca not implemented */
543 };
544
545 @@ -10039,6 +10089,8 @@ static const struct wmi_ops wmi_10_2_4_o
546 .gen_pdev_enable_adaptive_cca =
547 ath10k_wmi_op_gen_pdev_enable_adaptive_cca,
548 .get_vdev_subtype = ath10k_wmi_10_2_4_op_get_vdev_subtype,
549 + .gen_gpio_config = ath10k_wmi_op_gen_gpio_config,
550 + .gen_gpio_output = ath10k_wmi_op_gen_gpio_output,
551 /* .gen_bcn_tmpl not implemented */
552 /* .gen_prb_tmpl not implemented */
553 /* .gen_p2p_go_bcn_ie not implemented */
554 @@ -10119,6 +10171,8 @@ static const struct wmi_ops wmi_10_4_ops
555 .gen_pdev_bss_chan_info_req = ath10k_wmi_10_2_op_gen_pdev_bss_chan_info,
556 .gen_echo = ath10k_wmi_op_gen_echo,
557 .gen_pdev_get_tpc_config = ath10k_wmi_10_2_4_op_gen_pdev_get_tpc_config,
558 + .gen_gpio_config = ath10k_wmi_op_gen_gpio_config,
559 + .gen_gpio_output = ath10k_wmi_op_gen_gpio_output,
560 };
561
562 int ath10k_wmi_attach(struct ath10k *ar)
563 --- a/ath10k-4.19/wmi.h
564 +++ b/ath10k-4.19/wmi.h
565 @@ -3044,6 +3044,41 @@ enum wmi_10_4_feature_mask {
566
567 };
568
569 +/* WMI_GPIO_CONFIG_CMDID */
570 +enum {
571 + WMI_GPIO_PULL_NONE,
572 + WMI_GPIO_PULL_UP,
573 + WMI_GPIO_PULL_DOWN,
574 +};
575 +
576 +enum {
577 + WMI_GPIO_INTTYPE_DISABLE,
578 + WMI_GPIO_INTTYPE_RISING_EDGE,
579 + WMI_GPIO_INTTYPE_FALLING_EDGE,
580 + WMI_GPIO_INTTYPE_BOTH_EDGE,
581 + WMI_GPIO_INTTYPE_LEVEL_LOW,
582 + WMI_GPIO_INTTYPE_LEVEL_HIGH
583 +};
584 +
585 +/* WMI_GPIO_CONFIG_CMDID */
586 +struct wmi_gpio_config_cmd {
587 + __le32 gpio_num; /* GPIO number to be setup */
588 + __le32 input; /* 0 - Output/ 1 - Input */
589 + __le32 pull_type; /* Pull type defined above */
590 + __le32 intr_mode; /* Interrupt mode defined above (Input) */
591 +} __packed;
592 +
593 +/* WMI_GPIO_OUTPUT_CMDID */
594 +struct wmi_gpio_output_cmd {
595 + __le32 gpio_num; /* GPIO number to be setup */
596 + __le32 set; /* Set the GPIO pin*/
597 +} __packed;
598 +
599 +/* WMI_GPIO_INPUT_EVENTID */
600 +struct wmi_gpio_input_event {
601 + __le32 gpio_num; /* GPIO number which changed state */
602 +} __packed;
603 +
604 struct wmi_ext_resource_config_10_4_cmd {
605 /* contains enum wmi_host_platform_type */
606 __le32 host_platform_config;
607 --- a/ath10k-5.2/Kconfig
608 +++ b/ath10k-5.2/Kconfig
609 @@ -66,6 +66,16 @@ config ATH10K_DEBUGFS
610
611 If unsure, say Y to make it easier to debug problems.
612
613 +config ATH10K_LEDS
614 + bool "Atheros ath10k LED support"
615 + depends on ATH10K
616 + select MAC80211_LEDS
617 + select LEDS_CLASS
618 + select NEW_LEDS
619 + default y
620 + ---help---
621 + This option is necessary, if you want LED support for chipset connected led pins. If unsure, say N.
622 +
623 config ATH10K_SPECTRAL
624 bool "Atheros ath10k spectral scan support"
625 depends on ATH10K_DEBUGFS
626 --- a/ath10k-5.2/Makefile
627 +++ b/ath10k-5.2/Makefile
628 @@ -19,6 +19,7 @@ ath10k_core-$(CONFIG_ATH10K_SPECTRAL) +=
629 ath10k_core-$(CONFIG_NL80211_TESTMODE) += testmode.o
630 ath10k_core-$(CONFIG_ATH10K_TRACING) += trace.o
631 ath10k_core-$(CONFIG_THERMAL) += thermal.o
632 +ath10k_core-$(CONFIG_ATH10K_LEDS) += leds.o
633 ath10k_core-$(CONFIG_MAC80211_DEBUGFS) += debugfs_sta.o
634 ath10k_core-$(CONFIG_PM) += wow.o
635 ath10k_core-$(CONFIG_DEV_COREDUMP) += coredump.o
636 --- a/ath10k-5.2/core.c
637 +++ b/ath10k-5.2/core.c
638 @@ -25,6 +25,7 @@
639 #include "testmode.h"
640 #include "wmi-ops.h"
641 #include "coredump.h"
642 +#include "leds.h"
643
644 /* Disable ath10k-ct DBGLOG output by default */
645 unsigned int ath10k_debug_mask = ATH10K_DBG_NO_DBGLOG;
646 @@ -63,6 +64,7 @@ static const struct ath10k_hw_params ath
647 .dev_id = QCA988X_2_0_DEVICE_ID,
648 .bus = ATH10K_BUS_PCI,
649 .name = "qca988x hw2.0",
650 + .led_pin = 1,
651 .patch_load_addr = QCA988X_HW_2_0_PATCH_LOAD_ADDR,
652 .uart_pin = 7,
653 .cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_ALL,
654 @@ -131,6 +133,7 @@ static const struct ath10k_hw_params ath
655 .dev_id = QCA9887_1_0_DEVICE_ID,
656 .bus = ATH10K_BUS_PCI,
657 .name = "qca9887 hw1.0",
658 + .led_pin = 1,
659 .patch_load_addr = QCA9887_HW_1_0_PATCH_LOAD_ADDR,
660 .uart_pin = 7,
661 .cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_ALL,
662 @@ -305,6 +308,7 @@ static const struct ath10k_hw_params ath
663 .dev_id = QCA99X0_2_0_DEVICE_ID,
664 .bus = ATH10K_BUS_PCI,
665 .name = "qca99x0 hw2.0",
666 + .led_pin = 17,
667 .patch_load_addr = QCA99X0_HW_2_0_PATCH_LOAD_ADDR,
668 .uart_pin = 7,
669 .otp_exe_param = 0x00000700,
670 @@ -345,6 +349,7 @@ static const struct ath10k_hw_params ath
671 .dev_id = QCA9984_1_0_DEVICE_ID,
672 .bus = ATH10K_BUS_PCI,
673 .name = "qca9984/qca9994 hw1.0",
674 + .led_pin = 17,
675 .patch_load_addr = QCA9984_HW_1_0_PATCH_LOAD_ADDR,
676 .uart_pin = 7,
677 .cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_EACH,
678 @@ -392,6 +397,7 @@ static const struct ath10k_hw_params ath
679 .dev_id = QCA9888_2_0_DEVICE_ID,
680 .bus = ATH10K_BUS_PCI,
681 .name = "qca9888 hw2.0",
682 + .led_pin = 17,
683 .patch_load_addr = QCA9888_HW_2_0_PATCH_LOAD_ADDR,
684 .uart_pin = 7,
685 .cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_EACH,
686 @@ -3452,6 +3458,10 @@ int ath10k_core_start(struct ath10k *ar,
687 ath10k_wmi_check_apply_board_power_ctl_table(ar);
688 }
689
690 + status = ath10k_leds_start(ar);
691 + if (status)
692 + goto err_hif_stop;
693 +
694 return 0;
695
696 err_hif_stop:
697 @@ -3708,9 +3718,18 @@ static void ath10k_core_register_work(st
698 goto err_spectral_destroy;
699 }
700
701 + status = ath10k_leds_register(ar);
702 + if (status) {
703 + ath10k_err(ar, "could not register leds: %d\n",
704 + status);
705 + goto err_thermal_unregister;
706 + }
707 +
708 set_bit(ATH10K_FLAG_CORE_REGISTERED, &ar->dev_flags);
709 return;
710
711 +err_thermal_unregister:
712 + ath10k_thermal_unregister(ar);
713 err_spectral_destroy:
714 ath10k_spectral_destroy(ar);
715 err_debug_destroy:
716 @@ -3770,6 +3789,8 @@ void ath10k_core_unregister(struct ath10
717 if (!test_bit(ATH10K_FLAG_CORE_REGISTERED, &ar->dev_flags))
718 return;
719
720 + ath10k_leds_unregister(ar);
721 +
722 ath10k_thermal_unregister(ar);
723 /* Stop spectral before unregistering from mac80211 to remove the
724 * relayfs debugfs file cleanly. Otherwise the parent debugfs tree
725 --- a/ath10k-5.2/core.h
726 +++ b/ath10k-5.2/core.h
727 @@ -14,6 +14,7 @@
728 #include <linux/pci.h>
729 #include <linux/uuid.h>
730 #include <linux/time.h>
731 +#include <linux/leds.h>
732
733 #include "htt.h"
734 #include "htc.h"
735 @@ -1441,6 +1442,13 @@ struct ath10k {
736 } testmode;
737
738 struct {
739 + struct gpio_led wifi_led;
740 + struct led_classdev cdev;
741 + char label[48];
742 + u32 gpio_state_pin;
743 + } leds;
744 +
745 + struct {
746 /* protected by data_lock */
747 u32 fw_crash_counter;
748 u32 fw_warm_reset_counter;
749 --- a/ath10k-5.2/hw.h
750 +++ b/ath10k-5.2/hw.h
751 @@ -515,6 +515,7 @@ struct ath10k_hw_params {
752 const char *name;
753 u32 patch_load_addr;
754 int uart_pin;
755 + int led_pin;
756 u32 otp_exe_param;
757
758 /* Type of hw cycle counter wraparound logic, for more info
759 --- /dev/null
760 +++ b/ath10k-5.2/leds.c
761 @@ -0,0 +1,103 @@
762 +/*
763 + * Copyright (c) 2005-2011 Atheros Communications Inc.
764 + * Copyright (c) 2011-2017 Qualcomm Atheros, Inc.
765 + * Copyright (c) 2018 Sebastian Gottschall <s.gottschall@dd-wrt.com>
766 + * Copyright (c) 2018, The Linux Foundation. All rights reserved.
767 + *
768 + * Permission to use, copy, modify, and/or distribute this software for any
769 + * purpose with or without fee is hereby granted, provided that the above
770 + * copyright notice and this permission notice appear in all copies.
771 + *
772 + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
773 + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
774 + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
775 + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
776 + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
777 + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
778 + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
779 + */
780 +
781 +#include <linux/leds.h>
782 +
783 +#include "core.h"
784 +#include "wmi.h"
785 +#include "wmi-ops.h"
786 +
787 +#include "leds.h"
788 +
789 +static int ath10k_leds_set_brightness_blocking(struct led_classdev *led_cdev,
790 + enum led_brightness brightness)
791 +{
792 + struct ath10k *ar = container_of(led_cdev, struct ath10k,
793 + leds.cdev);
794 + struct gpio_led *led = &ar->leds.wifi_led;
795 +
796 + mutex_lock(&ar->conf_mutex);
797 +
798 + if (ar->state != ATH10K_STATE_ON)
799 + goto out;
800 +
801 + ar->leds.gpio_state_pin = (brightness != LED_OFF) ^ led->active_low;
802 + ath10k_wmi_gpio_output(ar, led->gpio, ar->leds.gpio_state_pin);
803 +
804 +out:
805 + mutex_unlock(&ar->conf_mutex);
806 +
807 + return 0;
808 +}
809 +
810 +int ath10k_leds_start(struct ath10k *ar)
811 +{
812 + if (ar->hw_params.led_pin == 0)
813 + /* leds not supported */
814 + return 0;
815 +
816 + /* under some circumstances, the gpio pin gets reconfigured
817 + * to default state by the firmware, so we need to
818 + * reconfigure it this behaviour has only ben seen on
819 + * QCA9984 and QCA99XX devices so far
820 + */
821 + ath10k_wmi_gpio_config(ar, ar->hw_params.led_pin, 0,
822 + WMI_GPIO_PULL_NONE, WMI_GPIO_INTTYPE_DISABLE);
823 + ath10k_wmi_gpio_output(ar, ar->hw_params.led_pin, 1);
824 +
825 + return 0;
826 +}
827 +
828 +int ath10k_leds_register(struct ath10k *ar)
829 +{
830 + int ret;
831 +
832 + if (ar->hw_params.led_pin == 0)
833 + /* leds not supported */
834 + return 0;
835 +
836 + snprintf(ar->leds.label, sizeof(ar->leds.label), "ath10k-%s",
837 + wiphy_name(ar->hw->wiphy));
838 + ar->leds.wifi_led.active_low = 1;
839 + ar->leds.wifi_led.gpio = ar->hw_params.led_pin;
840 + ar->leds.wifi_led.name = ar->leds.label;
841 + ar->leds.wifi_led.default_state = LEDS_GPIO_DEFSTATE_KEEP;
842 +
843 + ar->leds.cdev.name = ar->leds.label;
844 + ar->leds.cdev.brightness_set_blocking = ath10k_leds_set_brightness_blocking;
845 +
846 + /* FIXME: this assignment doesn't make sense as it's NULL, remove it? */
847 + ar->leds.cdev.default_trigger = ar->leds.wifi_led.default_trigger;
848 +
849 + ret = led_classdev_register(wiphy_dev(ar->hw->wiphy), &ar->leds.cdev);
850 + if (ret)
851 + return ret;
852 +
853 + return 0;
854 +}
855 +
856 +void ath10k_leds_unregister(struct ath10k *ar)
857 +{
858 + if (ar->hw_params.led_pin == 0)
859 + /* leds not supported */
860 + return;
861 +
862 + led_classdev_unregister(&ar->leds.cdev);
863 +}
864 +
865 --- /dev/null
866 +++ b/ath10k-5.2/leds.h
867 @@ -0,0 +1,41 @@
868 +/*
869 + * Copyright (c) 2018, The Linux Foundation. All rights reserved.
870 + *
871 + * Permission to use, copy, modify, and/or distribute this software for any
872 + * purpose with or without fee is hereby granted, provided that the above
873 + * copyright notice and this permission notice appear in all copies.
874 + *
875 + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
876 + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
877 + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
878 + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
879 + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
880 + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
881 + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
882 + */
883 +#ifndef _LEDS_H_
884 +#define _LEDS_H_
885 +
886 +#include "core.h"
887 +
888 +#ifdef CONFIG_ATH10K_LEDS
889 +void ath10k_leds_unregister(struct ath10k *ar);
890 +int ath10k_leds_start(struct ath10k *ar);
891 +int ath10k_leds_register(struct ath10k *ar);
892 +#else
893 +static inline void ath10k_leds_unregister(struct ath10k *ar)
894 +{
895 +}
896 +
897 +static inline int ath10k_leds_start(struct ath10k *ar)
898 +{
899 + return 0;
900 +}
901 +
902 +static inline int ath10k_leds_register(struct ath10k *ar)
903 +{
904 + return 0;
905 +}
906 +
907 +#endif
908 +#endif /* _LEDS_H_ */
909 --- a/ath10k-5.2/mac.c
910 +++ b/ath10k-5.2/mac.c
911 @@ -24,6 +24,7 @@
912 #include "wmi-tlv.h"
913 #include "wmi-ops.h"
914 #include "wow.h"
915 +#include "leds.h"
916
917 /*********/
918 /* Rates */
919 --- a/ath10k-5.2/wmi-ops.h
920 +++ b/ath10k-5.2/wmi-ops.h
921 @@ -218,7 +218,10 @@ struct wmi_ops {
922 struct sk_buff *(*gen_bb_timing)
923 (struct ath10k *ar,
924 const struct wmi_bb_timing_cfg_arg *arg);
925 + struct sk_buff *(*gen_gpio_config)(struct ath10k *ar, u32 gpio_num,
926 + u32 input, u32 pull_type, u32 intr_mode);
927
928 + struct sk_buff *(*gen_gpio_output)(struct ath10k *ar, u32 gpio_num, u32 set);
929 };
930
931 int ath10k_wmi_cmd_send(struct ath10k *ar, struct sk_buff *skb, u32 cmd_id);
932 @@ -1105,6 +1108,35 @@ ath10k_wmi_force_fw_hang(struct ath10k *
933 return ath10k_wmi_cmd_send(ar, skb, ar->wmi.cmd->force_fw_hang_cmdid);
934 }
935
936 +static inline int ath10k_wmi_gpio_config(struct ath10k *ar, u32 gpio_num,
937 + u32 input, u32 pull_type, u32 intr_mode)
938 +{
939 + struct sk_buff *skb;
940 +
941 + if (!ar->wmi.ops->gen_gpio_config)
942 + return -EOPNOTSUPP;
943 +
944 + skb = ar->wmi.ops->gen_gpio_config(ar, gpio_num, input, pull_type, intr_mode);
945 + if (IS_ERR(skb))
946 + return PTR_ERR(skb);
947 +
948 + return ath10k_wmi_cmd_send(ar, skb, ar->wmi.cmd->gpio_config_cmdid);
949 +}
950 +
951 +static inline int ath10k_wmi_gpio_output(struct ath10k *ar, u32 gpio_num, u32 set)
952 +{
953 + struct sk_buff *skb;
954 +
955 + if (!ar->wmi.ops->gen_gpio_config)
956 + return -EOPNOTSUPP;
957 +
958 + skb = ar->wmi.ops->gen_gpio_output(ar, gpio_num, set);
959 + if (IS_ERR(skb))
960 + return PTR_ERR(skb);
961 +
962 + return ath10k_wmi_cmd_send(ar, skb, ar->wmi.cmd->gpio_output_cmdid);
963 +}
964 +
965 static inline int
966 ath10k_wmi_dbglog_cfg(struct ath10k *ar, u64 module_enable, u32 log_level)
967 {
968 --- a/ath10k-5.2/wmi-tlv.c
969 +++ b/ath10k-5.2/wmi-tlv.c
970 @@ -4311,6 +4311,8 @@ static const struct wmi_ops wmi_tlv_ops
971 .gen_echo = ath10k_wmi_tlv_op_gen_echo,
972 .gen_vdev_spectral_conf = ath10k_wmi_tlv_op_gen_vdev_spectral_conf,
973 .gen_vdev_spectral_enable = ath10k_wmi_tlv_op_gen_vdev_spectral_enable,
974 + /* .gen_gpio_config not implemented */
975 + /* .gen_gpio_output not implemented */
976 };
977
978 static const struct wmi_peer_flags_map wmi_tlv_peer_flags_map = {
979 --- a/ath10k-5.2/wmi.c
980 +++ b/ath10k-5.2/wmi.c
981 @@ -8286,6 +8286,49 @@ ath10k_wmi_op_gen_peer_set_param(struct
982 return skb;
983 }
984
985 +static struct sk_buff *ath10k_wmi_op_gen_gpio_config(struct ath10k *ar,
986 + u32 gpio_num, u32 input,
987 + u32 pull_type, u32 intr_mode)
988 +{
989 + struct wmi_gpio_config_cmd *cmd;
990 + struct sk_buff *skb;
991 +
992 + skb = ath10k_wmi_alloc_skb(ar, sizeof(*cmd));
993 + if (!skb)
994 + return ERR_PTR(-ENOMEM);
995 +
996 + cmd = (struct wmi_gpio_config_cmd *)skb->data;
997 + cmd->pull_type = __cpu_to_le32(pull_type);
998 + cmd->gpio_num = __cpu_to_le32(gpio_num);
999 + cmd->input = __cpu_to_le32(input);
1000 + cmd->intr_mode = __cpu_to_le32(intr_mode);
1001 +
1002 + ath10k_dbg(ar, ATH10K_DBG_WMI, "wmi gpio_config gpio_num 0x%08x input 0x%08x pull_type 0x%08x intr_mode 0x%08x\n",
1003 + gpio_num, input, pull_type, intr_mode);
1004 +
1005 + return skb;
1006 +}
1007 +
1008 +static struct sk_buff *ath10k_wmi_op_gen_gpio_output(struct ath10k *ar,
1009 + u32 gpio_num, u32 set)
1010 +{
1011 + struct wmi_gpio_output_cmd *cmd;
1012 + struct sk_buff *skb;
1013 +
1014 + skb = ath10k_wmi_alloc_skb(ar, sizeof(*cmd));
1015 + if (!skb)
1016 + return ERR_PTR(-ENOMEM);
1017 +
1018 + cmd = (struct wmi_gpio_output_cmd *)skb->data;
1019 + cmd->gpio_num = __cpu_to_le32(gpio_num);
1020 + cmd->set = __cpu_to_le32(set);
1021 +
1022 + ath10k_dbg(ar, ATH10K_DBG_WMI, "wmi gpio_output gpio_num 0x%08x set 0x%08x\n",
1023 + gpio_num, set);
1024 +
1025 + return skb;
1026 +}
1027 +
1028 static struct sk_buff *
1029 ath10k_wmi_op_gen_set_psmode(struct ath10k *ar, u32 vdev_id,
1030 enum wmi_sta_ps_mode psmode)
1031 @@ -10058,6 +10101,9 @@ static const struct wmi_ops wmi_ops = {
1032 .fw_stats_fill = ath10k_wmi_main_op_fw_stats_fill,
1033 .get_vdev_subtype = ath10k_wmi_op_get_vdev_subtype,
1034 .gen_echo = ath10k_wmi_op_gen_echo,
1035 + .gen_gpio_config = ath10k_wmi_op_gen_gpio_config,
1036 + .gen_gpio_output = ath10k_wmi_op_gen_gpio_output,
1037 +
1038 /* .gen_bcn_tmpl not implemented */
1039 /* .gen_prb_tmpl not implemented */
1040 /* .gen_p2p_go_bcn_ie not implemented */
1041 @@ -10128,6 +10174,8 @@ static const struct wmi_ops wmi_10_1_ops
1042 .fw_stats_fill = ath10k_wmi_10x_op_fw_stats_fill,
1043 .get_vdev_subtype = ath10k_wmi_op_get_vdev_subtype,
1044 .gen_echo = ath10k_wmi_op_gen_echo,
1045 + .gen_gpio_config = ath10k_wmi_op_gen_gpio_config,
1046 + .gen_gpio_output = ath10k_wmi_op_gen_gpio_output,
1047 /* .gen_bcn_tmpl not implemented */
1048 /* .gen_prb_tmpl not implemented */
1049 /* .gen_p2p_go_bcn_ie not implemented */
1050 @@ -10207,6 +10255,8 @@ static const struct wmi_ops wmi_10_2_ops
1051 .gen_delba_send = ath10k_wmi_op_gen_delba_send,
1052 .fw_stats_fill = ath10k_wmi_10x_op_fw_stats_fill,
1053 .get_vdev_subtype = ath10k_wmi_op_get_vdev_subtype,
1054 + .gen_gpio_config = ath10k_wmi_op_gen_gpio_config,
1055 + .gen_gpio_output = ath10k_wmi_op_gen_gpio_output,
1056 /* .gen_pdev_enable_adaptive_cca not implemented */
1057 };
1058
1059 @@ -10278,6 +10328,8 @@ static const struct wmi_ops wmi_10_2_4_o
1060 ath10k_wmi_op_gen_pdev_enable_adaptive_cca,
1061 .get_vdev_subtype = ath10k_wmi_10_2_4_op_get_vdev_subtype,
1062 .gen_bb_timing = ath10k_wmi_10_2_4_op_gen_bb_timing,
1063 + .gen_gpio_config = ath10k_wmi_op_gen_gpio_config,
1064 + .gen_gpio_output = ath10k_wmi_op_gen_gpio_output,
1065 /* .gen_bcn_tmpl not implemented */
1066 /* .gen_prb_tmpl not implemented */
1067 /* .gen_p2p_go_bcn_ie not implemented */
1068 @@ -10359,6 +10411,8 @@ static const struct wmi_ops wmi_10_4_ops
1069 .gen_pdev_bss_chan_info_req = ath10k_wmi_10_2_op_gen_pdev_bss_chan_info,
1070 .gen_echo = ath10k_wmi_op_gen_echo,
1071 .gen_pdev_get_tpc_config = ath10k_wmi_10_2_4_op_gen_pdev_get_tpc_config,
1072 + .gen_gpio_config = ath10k_wmi_op_gen_gpio_config,
1073 + .gen_gpio_output = ath10k_wmi_op_gen_gpio_output,
1074 };
1075
1076 int ath10k_wmi_attach(struct ath10k *ar)
1077 --- a/ath10k-5.2/wmi.h
1078 +++ b/ath10k-5.2/wmi.h
1079 @@ -3103,6 +3103,41 @@ enum wmi_10_4_feature_mask {
1080
1081 };
1082
1083 +/* WMI_GPIO_CONFIG_CMDID */
1084 +enum {
1085 + WMI_GPIO_PULL_NONE,
1086 + WMI_GPIO_PULL_UP,
1087 + WMI_GPIO_PULL_DOWN,
1088 +};
1089 +
1090 +enum {
1091 + WMI_GPIO_INTTYPE_DISABLE,
1092 + WMI_GPIO_INTTYPE_RISING_EDGE,
1093 + WMI_GPIO_INTTYPE_FALLING_EDGE,
1094 + WMI_GPIO_INTTYPE_BOTH_EDGE,
1095 + WMI_GPIO_INTTYPE_LEVEL_LOW,
1096 + WMI_GPIO_INTTYPE_LEVEL_HIGH
1097 +};
1098 +
1099 +/* WMI_GPIO_CONFIG_CMDID */
1100 +struct wmi_gpio_config_cmd {
1101 + __le32 gpio_num; /* GPIO number to be setup */
1102 + __le32 input; /* 0 - Output/ 1 - Input */
1103 + __le32 pull_type; /* Pull type defined above */
1104 + __le32 intr_mode; /* Interrupt mode defined above (Input) */
1105 +} __packed;
1106 +
1107 +/* WMI_GPIO_OUTPUT_CMDID */
1108 +struct wmi_gpio_output_cmd {
1109 + __le32 gpio_num; /* GPIO number to be setup */
1110 + __le32 set; /* Set the GPIO pin*/
1111 +} __packed;
1112 +
1113 +/* WMI_GPIO_INPUT_EVENTID */
1114 +struct wmi_gpio_input_event {
1115 + __le32 gpio_num; /* GPIO number which changed state */
1116 +} __packed;
1117 +
1118 struct wmi_ext_resource_config_10_4_cmd {
1119 /* contains enum wmi_host_platform_type */
1120 __le32 host_platform_config;
OpenWrt Source Repository