305b5702d5e1c944214c546de9edd0e259ee007b
[openwrt/staging/ldir.git] /
1 From cc52bfc04726a574fc4440bbbe0c710890e7040a Mon Sep 17 00:00:00 2001
2 From: Manoj Sai <abbaraju.manojsai@amarulasolutions.com>
3 Date: Wed, 25 Jan 2023 21:40:22 +0530
4 Subject: [PATCH] arm64: dts: rockchip: Enable Ethernet for Radxa CM3 IO
5
6 Add ethernet nodes for enabling gmac1 on the Radxa CM3 IO board.
7
8 Signed-off-by: Manoj Sai <abbaraju.manojsai@amarulasolutions.com>
9 Link: https://lore.kernel.org/r/20230125161023.12115-1-jagan@amarulasolutions.com
10 Signed-off-by: Heiko Stuebner <heiko@sntech.de>
11 ---
12 .../boot/dts/rockchip/rk3566-radxa-cm3-io.dts | 93 +++++++++++++++++++
13 1 file changed, 93 insertions(+)
14
15 --- a/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts
16 +++ b/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3-io.dts
17 @@ -21,6 +21,13 @@
18 stdout-path = "serial2:1500000n8";
19 };
20
21 + gmac1_clkin: external-gmac1-clock {
22 + compatible = "fixed-clock";
23 + clock-frequency = <125000000>;
24 + clock-output-names = "gmac1_clkin";
25 + #clock-cells = <0>;
26 + };
27 +
28 hdmi-con {
29 compatible = "hdmi-connector";
30 type = "a";
31 @@ -83,6 +90,29 @@
32 status = "okay";
33 };
34
35 +&gmac1 {
36 + assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
37 + assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&gmac1_clkin>;
38 + assigned-clock-rates = <0>, <125000000>;
39 + clock_in_out = "input";
40 + phy-handle = <&rgmii_phy1>;
41 + phy-mode = "rgmii";
42 + pinctrl-names = "default";
43 + pinctrl-0 = <&gmac1m0_miim
44 + &gmac1m0_tx_bus2
45 + &gmac1m0_rx_bus2
46 + &gmac1m0_rgmii_clk
47 + &gmac1m0_rgmii_bus
48 + &gmac1m0_clkinout>;
49 + snps,reset-gpio = <&gpio4 RK_PC2 GPIO_ACTIVE_LOW>;
50 + snps,reset-active-low;
51 + /* Reset time is 20ms, 100ms for rtl8211f */
52 + snps,reset-delays-us = <0 20000 100000>;
53 + tx_delay = <0x46>;
54 + rx_delay = <0x2e>;
55 + status = "okay";
56 +};
57 +
58 &hdmi {
59 avdd-0v9-supply = <&vdda0v9_image>;
60 avdd-1v8-supply = <&vcca1v8_image>;
61 @@ -105,7 +135,70 @@
62 status = "okay";
63 };
64
65 +&mdio1 {
66 + rgmii_phy1: ethernet-phy@0 {
67 + compatible="ethernet-phy-ieee802.3-c22";
68 + reg= <0x0>;
69 + };
70 +};
71 +
72 &pinctrl {
73 + gmac1 {
74 + gmac1m0_miim: gmac1m0-miim {
75 + rockchip,pins =
76 + /* gmac1_mdcm0 */
77 + <3 RK_PC4 3 &pcfg_pull_none_drv_level_15>,
78 + /* gmac1_mdiom0 */
79 + <3 RK_PC5 3 &pcfg_pull_none_drv_level_15>;
80 + };
81 +
82 + gmac1m0_rx_bus2: gmac1m0-rx-bus2 {
83 + rockchip,pins =
84 + /* gmac1_rxd0m0 */
85 + <3 RK_PB1 3 &pcfg_pull_none_drv_level_15>,
86 + /* gmac1_rxd1m0 */
87 + <3 RK_PB2 3 &pcfg_pull_none_drv_level_15>,
88 + /* gmac1_rxdvcrsm0 */
89 + <3 RK_PB3 3 &pcfg_pull_none_drv_level_15>;
90 + };
91 +
92 + gmac1m0_tx_bus2: gmac1m0-tx-bus2 {
93 + rockchip,pins =
94 + /* gmac1_txd0m0 */
95 + <3 RK_PB5 3 &pcfg_pull_none_drv_level_15>,
96 + /* gmac1_txd1m0 */
97 + <3 RK_PB6 3 &pcfg_pull_none_drv_level_15>,
98 + /* gmac1_txenm0 */
99 + <3 RK_PB7 3 &pcfg_pull_none_drv_level_15>;
100 + };
101 +
102 + gmac1m0_rgmii_clk: gmac1m0-rgmii-clk {
103 + rockchip,pins =
104 + /* gmac1_rxclkm0 */
105 + <3 RK_PA7 3 &pcfg_pull_none_drv_level_15>,
106 + /* gmac1_txclkm0 */
107 + <3 RK_PA6 3 &pcfg_pull_none_drv_level_15>;
108 + };
109 +
110 + gmac1m0_rgmii_bus: gmac1m0-rgmii-bus {
111 + rockchip,pins =
112 + /* gmac1_rxd2m0 */
113 + <3 RK_PA4 3 &pcfg_pull_none_drv_level_15>,
114 + /* gmac1_rxd3m0 */
115 + <3 RK_PA5 3 &pcfg_pull_none_drv_level_15>,
116 + /* gmac1_txd2m0 */
117 + <3 RK_PA2 3 &pcfg_pull_none_drv_level_15>,
118 + /* gmac1_txd3m0 */
119 + <3 RK_PA3 3 &pcfg_pull_none_drv_level_15>;
120 + };
121 +
122 + gmac1m0_clkinout: gmac1m0-clkinout {
123 + rockchip,pins =
124 + /* gmac1_mclkinoutm0 */
125 + <3 RK_PC0 3 &pcfg_pull_none_drv_level_15>;
126 + };
127 + };
128 +
129 leds {
130 pi_nled_activity: pi-nled-activity {
131 rockchip,pins = <4 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;