git.openwrt.org Git - openwrt/staging/hauke.git/blob

   1 From 11e5bbe58eebdb10793eec374b6c8ccc7daf7ec8 Mon Sep 17 00:00:00 2001
   2 From: Peter Oh <peter.oh@bowerswilkins.com>
   3 Date: Tue, 30 Jun 2020 14:18:56 +0200
   4 Subject: [PATCH 08/19] mesh: use setup completion callback to complete mesh
   5  join
   6
   7 mesh join function is the last function to be called during
   8 mesh join process, but it's been called a bit earlier than
   9 it's supposed to be, so that some mesh parameter values
  10 such as VHT capabilities not applied correct when mesh join
  11 is in process.
  12 Moreover current design of mesh join that is called directly
  13 after mesh initialization isn't suitable for DFS channels to use,
  14 since mesh join process should be paused until DFS CAC is
  15 done and resumed after it's done.
  16 The callback will be called by hostapd_setup_interface_complete_sync.
  17 There is possiblity that completing mesh init fails, so add error
  18 handle codes.
  19
  20 Signed-off-by: Peter Oh <peter.oh@bowerswilkins.com>
  21 ---
  22  src/ap/hostapd.c      | 11 ++++++++++-
  23  wpa_supplicant/mesh.c | 12 ++++++++++--
  24  2 files changed, 20 insertions(+), 3 deletions(-)
  25
  26 --- a/src/ap/hostapd.c
  27 +++ b/src/ap/hostapd.c
  28 @@ -434,6 +434,8 @@ static void hostapd_free_hapd_data(struc
  29  #ifdef CONFIG_MESH
  30         wpabuf_free(hapd->mesh_pending_auth);
  31         hapd->mesh_pending_auth = NULL;
  32 +       /* handling setup failure is already done */
  33 +       hapd->setup_complete_cb = NULL;
  34  #endif /* CONFIG_MESH */
  35
  36         hostapd_clean_rrm(hapd);
  37 @@ -2156,6 +2158,13 @@ dfs_offload:
  38         if (hapd->setup_complete_cb)
  39                 hapd->setup_complete_cb(hapd->setup_complete_cb_ctx);
  40
  41 +#ifdef CONFIG_MESH
  42 +       if (delay_apply_cfg && iface->mconf == NULL) {
  43 +               wpa_printf(MSG_ERROR, "Error while completing mesh init");
  44 +               goto fail;
  45 +       }
  46 +#endif /* CONFIG_MESH */
  47 +
  48         wpa_printf(MSG_DEBUG, "%s: Setup of interface done.",
  49                    iface->bss[0]->conf->iface);
  50         if (iface->interfaces && iface->interfaces->terminate_on_error > 0)
  51 @@ -2299,7 +2308,7 @@ int hostapd_setup_interface(struct hosta
  52         ret = setup_interface(iface);
  53         if (ret) {
  54                 wpa_printf(MSG_ERROR, "%s: Unable to setup interface.",
  55 -                          iface->bss[0]->conf->iface);
  56 +                       iface->conf ? iface->conf->bss[0]->iface : "N/A");
  57                 return -1;
  58         }
  59
  60 --- a/wpa_supplicant/mesh.c
  61 +++ b/wpa_supplicant/mesh.c
  62 @@ -193,7 +193,6 @@ static int wpas_mesh_init_rsn(struct wpa
  63         return !wpa_s->mesh_rsn ? -1 : 0;
  64  }
  65
  66 -
  67  static int wpas_mesh_complete(struct wpa_supplicant *wpa_s)
  68  {
  69         struct hostapd_iface *ifmsh = wpa_s->ifmsh;
  70 @@ -244,6 +243,13 @@ static int wpas_mesh_complete(struct wpa
  71  }
  72
  73
  74 +static void wpas_mesh_complete_cb(void *arg)
  75 +{
  76 +       struct wpa_supplicant *wpa_s = arg;
  77 +       wpas_mesh_complete(wpa_s);
  78 +}
  79 +
  80 +
  81  static int wpa_supplicant_mesh_init(struct wpa_supplicant *wpa_s,
  82                                     struct wpa_ssid *ssid,
  83                                     struct hostapd_freq_params *freq)
  84 @@ -267,6 +273,7 @@ static int wpa_supplicant_mesh_init(stru
  85         if (!ifmsh)
  86                 return -ENOMEM;
  87
  88 +       ifmsh->owner = wpa_s;
  89         ifmsh->drv_flags = wpa_s->drv_flags;
  90         ifmsh->drv_flags2 = wpa_s->drv_flags2;
  91         ifmsh->num_bss = 1;
  92 @@ -285,6 +292,8 @@ static int wpa_supplicant_mesh_init(stru
  93         bss->drv_priv = wpa_s->drv_priv;
  94         bss->iface = ifmsh;
  95         bss->mesh_sta_free_cb = mesh_mpm_free_sta;
  96 +       bss->setup_complete_cb = wpas_mesh_complete_cb;
  97 +       bss->setup_complete_cb_ctx = wpa_s;
  98         frequency = ssid->frequency;
  99         if (frequency != freq->freq &&
 100             frequency == freq->freq + freq->sec_channel_offset * 20) {
 101 @@ -523,7 +532,6 @@ int wpa_supplicant_join_mesh(struct wpa_
 102                 goto out;
 103         }
 104
 105 -       ret = wpas_mesh_complete(wpa_s);
 106  out:
 107         return ret;
 108  }