git.openwrt.org Git - openwrt/staging/noltari.git/blob

   1 From 3c22f3fcbdb9f919ebdfa87a2ec237ac2abb7e03 Mon Sep 17 00:00:00 2001
   2 From: Yutang Jiang <yutang.jiang@nxp.com>
   3 Date: Thu, 27 Oct 2016 23:45:45 +0800
   4 Subject: [PATCH 05/93] armv8: set openwrt/lede default boot env for
   5  ls1043ardb
   6
   7 Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
   8 ---
   9  include/configs/ls1043a_common.h |   28 +++++++++++++++++++++++++---
  10  1 file changed, 25 insertions(+), 3 deletions(-)
  11
  12 diff --git a/include/configs/ls1043a_common.h b/include/configs/ls1043a_common.h
  13 index 68678f3..1db05bb 100644
  14 --- a/include/configs/ls1043a_common.h
  15 +++ b/include/configs/ls1043a_common.h
  16 @@ -273,6 +273,16 @@
  17                         "5m(kernel),1m(dtb),9m(file_system)"
  18  #endif
  19
  20 +#define WRTBOOT_DEFAULT "setenv bootargs root=/dev/mtdblock6 " \
  21 +       "rootfstype=squashfs,jffs2 noinitrd earlycon=uart8250,mmio,0x21c0500 " \
  22 +       "console=ttyS0,115200 mtdparts=60000000.nor:1M(rcw),1M(u-boot)," \
  23 +       "1M(u-boot-env),1M(fman),1M(dtb),5M(kernel),54M(rootfs),64M(otherbank)" \
  24 +       " && cp.b 60400000 $fdtaddr 100000 && cp.b 60500000 $loadaddr 500000" \
  25 +       " && bootm $loadaddr - $fdtaddr"
  26 +#define WRTUPDATE_DEFAULT "tftp a0000000 <tftp_folder>/" \
  27 +       "lede-layerscape-64b-ls1043ardb-squashfs-firmware.bin && protect off all" \
  28 +       " && erase 60000000 +4000000 && cp.b a0000000 60000000 $filesize && reset"
  29 +
  30  /* Initial environment variables */
  31  #define CONFIG_EXTRA_ENV_SETTINGS              \
  32         "hwconfig=fsl_ddr:bank_intlv=auto\0"    \
  33 @@ -286,6 +296,19 @@
  34         "kernel_load=0xa0000000\0"              \
  35         "kernel_size=0x2800000\0"               \
  36         "console=ttyAMA0,38400n8\0"             \
  37 +       "ethaddr=00:e0:0c:00:77:00\0"   \
  38 +       "eth1addr=00:e0:0c:00:77:01\0"  \
  39 +       "eth2addr=00:e0:0c:00:77:02\0"  \
  40 +       "eth3addr=00:e0:0c:00:77:03\0"  \
  41 +       "eth4addr=00:e0:0c:00:77:04\0"  \
  42 +       "eth5addr=00:e0:0c:00:77:05\0"  \
  43 +       "eth6addr=00:e0:0c:00:77:06\0"  \
  44 +       "ethact=FM1@DTSEC2\0"                   \
  45 +       "loadaddr=82000000\0"                   \
  46 +       "ramdiskaddr=88000000\0"                \
  47 +       "fdtaddr=8f000000\0"                    \
  48 +       "wrtboot=" WRTBOOT_DEFAULT "\0" \
  49 +       "wrtupdate=" WRTUPDATE_DEFAULT "\0"     \
  50         "mtdparts=" MTDPARTS_DEFAULT "\0"
  51
  52  #define CONFIG_BOOTARGS                        "console=ttyS0,115200 root=/dev/ram0 " \
  53 @@ -296,10 +319,9 @@
  54  #define CONFIG_BOOTCOMMAND             "sf probe && sf read $kernel_load "    \
  55                                         "e0000 f00000 && bootm $kernel_load"
  56  #else
  57 -#define CONFIG_BOOTCOMMAND             "cp.b $kernel_start $kernel_load "     \
  58 -                                       "$kernel_size && bootm $kernel_load"
  59 +#define CONFIG_BOOTCOMMAND             "run wrtboot"
  60  #endif
  61 -#define CONFIG_BOOTDELAY               10
  62 +#define CONFIG_BOOTDELAY               3
  63
  64  /* Monitor Command Prompt */
  65  #define CONFIG_SYS_CBSIZE              512     /* Console I/O Buffer Size */
  66 --
  67 1.7.9.5
  68