git.openwrt.org Git - openwrt/staging/blocktrron.git/blob

   1 From bd1e82bb420adf4ad7cd468d8a482cde622dd69d Mon Sep 17 00:00:00 2001
   2 From: Hans de Goede <hdegoede@redhat.com>
   3 Date: Wed, 10 Oct 2018 13:01:02 +0200
   4 Subject: [PATCH] brcmfmac: Set board_type from DMI on x86 based machines
   5
   6 For x86 based machines, set the board_type used for nvram file selection
   7 based on the DMI sys-vendor and product-name strings.
   8
   9 Since on some models these strings are too generic, this commit also adds
  10 a quirk table overriding the strings for models listed in that table.
  11
  12 The board_type setting is used to load the board-specific nvram file with
  13 a board-specific name so that we can ship files for each supported board
  14 in linux-firmware.
  15
  16 Signed-off-by: Hans de Goede <hdegoede@redhat.com>
  17 Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
  18 ---
  19  .../wireless/broadcom/brcm80211/brcmfmac/Makefile  |   2 +
  20  .../wireless/broadcom/brcm80211/brcmfmac/common.c  |   3 +-
  21  .../wireless/broadcom/brcm80211/brcmfmac/common.h  |   7 ++
  22  .../net/wireless/broadcom/brcm80211/brcmfmac/dmi.c | 116 +++++++++++++++++++++
  23  4 files changed, 127 insertions(+), 1 deletion(-)
  24  create mode 100644 drivers/net/wireless/broadcom/brcm80211/brcmfmac/dmi.c
  25
  26 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/Makefile
  27 +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/Makefile
  28 @@ -54,3 +54,5 @@ brcmfmac-$(CPTCFG_BRCM_TRACING) += \
  29                 tracepoint.o
  30  brcmfmac-$(CONFIG_OF) += \
  31                 of.o
  32 +brcmfmac-$(CONFIG_DMI) += \
  33 +               dmi.o
  34 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c
  35 +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c
  36 @@ -448,8 +448,9 @@ struct brcmf_mp_device *brcmf_get_module
  37                 }
  38         }
  39         if (!found) {
  40 -               /* No platform data for this device, try OF (Open Firwmare) */
  41 +               /* No platform data for this device, try OF and DMI data */
  42                 brcmf_of_probe(dev, bus_type, settings);
  43 +               brcmf_dmi_probe(settings, chip, chiprev);
  44         }
  45         return settings;
  46  }
  47 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.h
  48 +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.h
  49 @@ -75,4 +75,11 @@ void brcmf_release_module_param(struct b
  50  /* Sets dongle media info (drv_version, mac address). */
  51  int brcmf_c_preinit_dcmds(struct brcmf_if *ifp);
  52
  53 +#ifdef CONFIG_DMI
  54 +void brcmf_dmi_probe(struct brcmf_mp_device *settings, u32 chip, u32 chiprev);
  55 +#else
  56 +static inline void
  57 +brcmf_dmi_probe(struct brcmf_mp_device *settings, u32 chip, u32 chiprev) {}
  58 +#endif
  59 +
  60  #endif /* BRCMFMAC_COMMON_H */
  61 --- /dev/null
  62 +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/dmi.c
  63 @@ -0,0 +1,116 @@
  64 +/*
  65 + * Copyright 2018 Hans de Goede <hdegoede@redhat.com>
  66 + *
  67 + * Permission to use, copy, modify, and/or distribute this software for any
  68 + * purpose with or without fee is hereby granted, provided that the above
  69 + * copyright notice and this permission notice appear in all copies.
  70 + *
  71 + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
  72 + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
  73 + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
  74 + * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
  75 + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
  76 + * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
  77 + * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  78 + */
  79 +
  80 +#include <linux/dmi.h>
  81 +#include <linux/mod_devicetable.h>
  82 +#include "core.h"
  83 +#include "common.h"
  84 +#include "brcm_hw_ids.h"
  85 +
  86 +/* The DMI data never changes so we can use a static buf for this */
  87 +static char dmi_board_type[128];
  88 +
  89 +struct brcmf_dmi_data {
  90 +       u32 chip;
  91 +       u32 chiprev;
  92 +       const char *board_type;
  93 +};
  94 +
  95 +/* NOTE: Please keep all entries sorted alphabetically */
  96 +
  97 +static const struct brcmf_dmi_data gpd_win_pocket_data = {
  98 +       BRCM_CC_4356_CHIP_ID, 2, "gpd-win-pocket"
  99 +};
 100 +
 101 +static const struct brcmf_dmi_data jumper_ezpad_mini3_data = {
 102 +       BRCM_CC_43430_CHIP_ID, 0, "jumper-ezpad-mini3"
 103 +};
 104 +
 105 +static const struct brcmf_dmi_data meegopad_t08_data = {
 106 +       BRCM_CC_43340_CHIP_ID, 2, "meegopad-t08"
 107 +};
 108 +
 109 +static const struct dmi_system_id dmi_platform_data[] = {
 110 +       {
 111 +               /* Match for the GPDwin which unfortunately uses somewhat
 112 +                * generic dmi strings, which is why we test for 4 strings.
 113 +                * Comparing against 23 other byt/cht boards, board_vendor
 114 +                * and board_name are unique to the GPDwin, where as only one
 115 +                * other board has the same board_serial and 3 others have
 116 +                * the same default product_name. Also the GPDwin is the
 117 +                * only device to have both board_ and product_name not set.
 118 +                */
 119 +               .matches = {
 120 +                       DMI_MATCH(DMI_BOARD_VENDOR, "AMI Corporation"),
 121 +                       DMI_MATCH(DMI_BOARD_NAME, "Default string"),
 122 +                       DMI_MATCH(DMI_BOARD_SERIAL, "Default string"),
 123 +                       DMI_MATCH(DMI_PRODUCT_NAME, "Default string"),
 124 +               },
 125 +               .driver_data = (void *)&gpd_win_pocket_data,
 126 +       },
 127 +       {
 128 +               /* Jumper EZpad mini3 */
 129 +               .matches = {
 130 +                       DMI_MATCH(DMI_SYS_VENDOR, "Insyde"),
 131 +                       DMI_MATCH(DMI_PRODUCT_NAME, "CherryTrail"),
 132 +                       /* jumperx.T87.KFBNEEA02 with the version-nr dropped */
 133 +                       DMI_MATCH(DMI_BIOS_VERSION, "jumperx.T87.KFBNEEA"),
 134 +               },
 135 +               .driver_data = (void *)&jumper_ezpad_mini3_data,
 136 +       },
 137 +       {
 138 +               /* Meegopad T08 */
 139 +               .matches = {
 140 +                       DMI_MATCH(DMI_SYS_VENDOR, "Default string"),
 141 +                       DMI_MATCH(DMI_PRODUCT_NAME, "Default string"),
 142 +                       DMI_MATCH(DMI_BOARD_NAME, "T3 MRD"),
 143 +                       DMI_MATCH(DMI_BOARD_VERSION, "V1.1"),
 144 +               },
 145 +               .driver_data = (void *)&meegopad_t08_data,
 146 +       },
 147 +       {}
 148 +};
 149 +
 150 +void brcmf_dmi_probe(struct brcmf_mp_device *settings, u32 chip, u32 chiprev)
 151 +{
 152 +       const struct dmi_system_id *match;
 153 +       const struct brcmf_dmi_data *data;
 154 +       const char *sys_vendor;
 155 +       const char *product_name;
 156 +
 157 +       /* Some models have DMI strings which are too generic, e.g.
 158 +        * "Default string", we use a quirk table for these.
 159 +        */
 160 +       for (match = dmi_first_match(dmi_platform_data);
 161 +            match;
 162 +            match = dmi_first_match(match + 1)) {
 163 +               data = match->driver_data;
 164 +
 165 +               if (data->chip == chip && data->chiprev == chiprev) {
 166 +                       settings->board_type = data->board_type;
 167 +                       return;
 168 +               }
 169 +       }
 170 +
 171 +       /* Not found in the quirk-table, use sys_vendor-product_name */
 172 +       sys_vendor = dmi_get_system_info(DMI_SYS_VENDOR);
 173 +       product_name = dmi_get_system_info(DMI_PRODUCT_NAME);
 174 +       if (sys_vendor && product_name) {
 175 +               snprintf(dmi_board_type, sizeof(dmi_board_type), "%s-%s",
 176 +                        sys_vendor, product_name);
 177 +               settings->board_type = dmi_board_type;
 178 +       }
 179 +}