git.openwrt.org Git - openwrt/staging/ynezz.git/blob

   1 From 4e0e8f87b81ed1dfa9876e0ce4492cc8f64c935a Mon Sep 17 00:00:00 2001
   2 From: Dave Stevenson <dave.stevenson@raspberrypi.com>
   3 Date: Fri, 26 Jun 2020 18:11:49 +0100
   4 Subject: [PATCH] media: i2c: imx290: Switch set_hmax to use
   5  imx290_write_buffered_reg
   6
   7 imx290_set_hmax was using two independent writes to set up hmax,
   8 when all other multi-register writes were using imx290_write_buffered_reg
   9 which claims the group hold first.
  10
  11 Switch imx290_set_hmax to using imx290_write_buffered_reg too.
  12
  13 Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
  14 ---
  15  drivers/media/i2c/imx290.c | 15 ++++-----------
  16  1 file changed, 4 insertions(+), 11 deletions(-)
  17
  18 --- a/drivers/media/i2c/imx290.c
  19 +++ b/drivers/media/i2c/imx290.c
  20 @@ -568,19 +568,12 @@ static int imx290_set_hmax(struct imx290
  21         u32 hmax = val + imx290->current_mode->width;
  22         int ret;
  23
  24 -       ret = imx290_write_reg(imx290, IMX290_HMAX_LOW, (hmax & 0xff));
  25 -       if (ret) {
  26 +       ret = imx290_write_buffered_reg(imx290, IMX290_HMAX_LOW, 2,
  27 +                                       hmax);
  28 +       if (ret)
  29                 dev_err(imx290->dev, "Error setting HMAX register\n");
  30 -               return ret;
  31 -       }
  32
  33 -       ret = imx290_write_reg(imx290, IMX290_HMAX_HIGH, ((hmax >> 8) & 0xff));
  34 -       if (ret) {
  35 -               dev_err(imx290->dev, "Error setting HMAX register\n");
  36 -               return ret;
  37 -       }
  38 -
  39 -       return 0;
  40 +       return ret;
  41  }
  42
  43  static int imx290_set_vmax(struct imx290 *imx290, u32 val)