git.openwrt.org Git - openwrt/staging/wigyori.git/blob

   1 From 382e6f9ec8c66b99657922073f5b9b312925dc1f Mon Sep 17 00:00:00 2001
   2 From: Jonathan Bell <jonathan@raspberrypi.com>
   3 Date: Tue, 26 Mar 2024 13:36:23 +0000
   4 Subject: [PATCH 0995/1085] drivers: mmc: be more cautious when manipulating
   5  Command Queue enable
   6
   7 Don't attempt to turn on CQ if the other mandatory features are not
   8 indicated as supported by the card. Also make sure that the register write
   9 actually stuck, as some cards claim support but never report back that
  10 the queue engine is enabled.
  11
  12 Signed-off-by: Jonathan Bell <jonathan@raspberrypi.com>
  13 ---
  14  drivers/mmc/core/sd.c     |  8 ++++++--
  15  drivers/mmc/core/sd_ops.c | 22 ++++++++++++++++++++++
  16  2 files changed, 28 insertions(+), 2 deletions(-)
  17
  18 --- a/drivers/mmc/core/sd.c
  19 +++ b/drivers/mmc/core/sd.c
  20 @@ -1088,8 +1088,12 @@ static int sd_parse_ext_reg_perf(struct
  21         if ((reg_buf[4] & BIT(0)) && !mmc_card_broken_sd_cache(card))
  22                 card->ext_perf.feature_support |= SD_EXT_PERF_CACHE;
  23
  24 -       /* Command queue support indicated via queue depth bits (0 to 4). */
  25 -       if (reg_buf[6] & 0x1f) {
  26 +       /*
  27 +        * Command queue support indicated via queue depth bits (0 to 4).
  28 +        * Qualify this with the other mandatory required features.
  29 +        */
  30 +       if (reg_buf[6] & 0x1f && card->ext_power.feature_support & SD_EXT_POWER_OFF_NOTIFY &&
  31 +           card->ext_perf.feature_support & SD_EXT_PERF_CACHE) {
  32                 card->ext_perf.feature_support |= SD_EXT_PERF_CMD_QUEUE;
  33                 card->ext_csd.cmdq_depth = reg_buf[6] & 0x1f;
  34                 card->ext_csd.cmdq_support = true;
  35 --- a/drivers/mmc/core/sd_ops.c
  36 +++ b/drivers/mmc/core/sd_ops.c
  37 @@ -8,6 +8,7 @@
  38  #include <linux/slab.h>
  39  #include <linux/types.h>
  40  #include <linux/export.h>
  41 +#include <linux/ktime.h>
  42  #include <linux/scatterlist.h>
  43
  44  #include <linux/mmc/host.h>
  45 @@ -448,6 +449,8 @@ static int mmc_sd_cmdq_switch(struct mmc
  46  {
  47         int err;
  48         u8 reg = 0;
  49 +       u8 *reg_buf = card->ext_reg_buf;
  50 +       ktime_t timeout;
  51         /*
  52          * SD offers two command queueing modes - sequential (in-order) and
  53          * voluntary (out-of-order). Apps Class A2 performance is only
  54 @@ -460,6 +463,25 @@ static int mmc_sd_cmdq_switch(struct mmc
  55         /* Performance enhancement register byte 262 controls command queueing */
  56         err = mmc_sd_write_ext_reg(card, card->ext_perf.fno, card->ext_perf.page,
  57                                    card->ext_perf.offset + 262, reg);
  58 +       if (err)
  59 +               goto out;
  60 +
  61 +       /* Poll the register - cards may have a lazy init/deinit sequence. */
  62 +       timeout = ktime_add_ms(ktime_get(), 10);
  63 +       while (1) {
  64 +               err = mmc_sd_read_ext_reg(card, card->ext_perf.fno, card->ext_perf.page,
  65 +                                         card->ext_perf.offset + 262, 1, reg_buf);
  66 +               if (err)
  67 +                       break;
  68 +               if ((reg_buf[0] & BIT(0)) == reg)
  69 +                       break;
  70 +               if (ktime_after(ktime_get(), timeout)) {
  71 +                       err = -EBADMSG;
  72 +                       break;
  73 +               }
  74 +               usleep_range(100, 200);
  75 +       }
  76 +out:
  77         if (!err)
  78                 card->ext_csd.cmdq_en = enable;
  79