git.openwrt.org Git - openwrt/staging/chunkeey.git/blob

   1 From 6bbb873c79b9bb0b3ca95fa4a4fe6cfd0ebe9d2c Mon Sep 17 00:00:00 2001
   2 From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
   3 Date: Fri, 4 Oct 2019 13:05:24 -0300
   4 Subject: [PATCH] media: dt-bindings: media: i2c: Add IMX290 CMOS
   5  sensor binding
   6
   7 Commit 8a97a4676f8b1badcd9cfbed2b081342847bb1b1 upstream.
   8
   9 Add devicetree binding for IMX290 CMOS image sensor. Let's also
  10 add MAINTAINERS entry for the binding and driver.
  11
  12 Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
  13 Reviewed-by: Rob Herring <robh@kernel.org>
  14 Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
  15 Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
  16 ---
  17  .../devicetree/bindings/media/i2c/imx290.txt  | 57 +++++++++++++++++++
  18  MAINTAINERS                                   |  8 +++
  19  2 files changed, 65 insertions(+)
  20  create mode 100644 Documentation/devicetree/bindings/media/i2c/imx290.txt
  21
  22 --- /dev/null
  23 +++ b/Documentation/devicetree/bindings/media/i2c/imx290.txt
  24 @@ -0,0 +1,57 @@
  25 +* Sony IMX290 1/2.8-Inch CMOS Image Sensor
  26 +
  27 +The Sony IMX290 is a 1/2.8-Inch CMOS Solid-state image sensor with
  28 +Square Pixel for Color Cameras. It is programmable through I2C and 4-wire
  29 +interfaces. The sensor output is available via CMOS logic parallel SDR output,
  30 +Low voltage LVDS DDR output and CSI-2 serial data output. The CSI-2 bus is the
  31 +default. No bindings have been defined for the other busses.
  32 +
  33 +Required Properties:
  34 +- compatible: Should be "sony,imx290"
  35 +- reg: I2C bus address of the device
  36 +- clocks: Reference to the xclk clock.
  37 +- clock-names: Should be "xclk".
  38 +- clock-frequency: Frequency of the xclk clock in Hz.
  39 +- vdddo-supply: Sensor digital IO regulator.
  40 +- vdda-supply: Sensor analog regulator.
  41 +- vddd-supply: Sensor digital core regulator.
  42 +
  43 +Optional Properties:
  44 +- reset-gpios: Sensor reset GPIO
  45 +
  46 +The imx290 device node should contain one 'port' child node with
  47 +an 'endpoint' subnode. For further reading on port node refer to
  48 +Documentation/devicetree/bindings/media/video-interfaces.txt.
  49 +
  50 +Required Properties on endpoint:
  51 +- data-lanes: check ../video-interfaces.txt
  52 +- link-frequencies: check ../video-interfaces.txt
  53 +- remote-endpoint: check ../video-interfaces.txt
  54 +
  55 +Example:
  56 +       &i2c1 {
  57 +               ...
  58 +               imx290: camera-sensor@1a {
  59 +                       compatible = "sony,imx290";
  60 +                       reg = <0x1a>;
  61 +
  62 +                       reset-gpios = <&msmgpio 35 GPIO_ACTIVE_LOW>;
  63 +                       pinctrl-names = "default";
  64 +                       pinctrl-0 = <&camera_rear_default>;
  65 +
  66 +                       clocks = <&gcc GCC_CAMSS_MCLK0_CLK>;
  67 +                       clock-names = "xclk";
  68 +                       clock-frequency = <37125000>;
  69 +
  70 +                       vdddo-supply = <&camera_vdddo_1v8>;
  71 +                       vdda-supply = <&camera_vdda_2v8>;
  72 +                       vddd-supply = <&camera_vddd_1v5>;
  73 +
  74 +                       port {
  75 +                               imx290_ep: endpoint {
  76 +                                       data-lanes = <1 2 3 4>;
  77 +                                       link-frequencies = /bits/ 64 <445500000>;
  78 +                                       remote-endpoint = <&csiphy0_ep>;
  79 +                               };
  80 +                       };
  81 +               };
  82 --- a/MAINTAINERS
  83 +++ b/MAINTAINERS
  84 @@ -15200,6 +15200,14 @@ S:     Maintained
  85  F:     drivers/media/i2c/imx274.c
  86  F:     Documentation/devicetree/bindings/media/i2c/imx274.txt
  87
  88 +SONY IMX290 SENSOR DRIVER
  89 +M:     Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
  90 +L:     linux-media@vger.kernel.org
  91 +T:     git git://linuxtv.org/media_tree.git
  92 +S:     Maintained
  93 +F:     drivers/media/i2c/imx290.c
  94 +F:     Documentation/devicetree/bindings/media/i2c/imx290.txt
  95 +
  96  SONY IMX319 SENSOR DRIVER
  97  M:     Bingbu Cao <bingbu.cao@intel.com>
  98  L:     linux-media@vger.kernel.org