git.openwrt.org Git - openwrt/staging/blogic.git/blob

   1 From 30dd62191d3dd97c08f7f9dc9ce77ffab457e4fb Mon Sep 17 00:00:00 2001
   2 From: Christian Marangi <ansuelsmth@gmail.com>
   3 Date: Fri, 8 Dec 2023 15:51:56 +0100
   4 Subject: [PATCH 09/13] net: phy: at803x: move specific at8031 config_intr to
   5  dedicated function
   6
   7 Move specific at8031 config_intr bits to dedicated function to make
   8 at803x_config_initr more generic.
   9
  10 This is needed in preparation for PHY driver split as qca8081 share the
  11 same function to setup interrupts.
  12
  13 Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
  14 Signed-off-by: David S. Miller <davem@davemloft.net>
  15 ---
  16  drivers/net/phy/at803x.c | 30 ++++++++++++++++++++++++------
  17  1 file changed, 24 insertions(+), 6 deletions(-)
  18
  19 --- a/drivers/net/phy/at803x.c
  20 +++ b/drivers/net/phy/at803x.c
  21 @@ -990,7 +990,6 @@ static int at803x_ack_interrupt(struct p
  22
  23  static int at803x_config_intr(struct phy_device *phydev)
  24  {
  25 -       struct at803x_priv *priv = phydev->priv;
  26         int err;
  27         int value;
  28
  29 @@ -1007,10 +1006,6 @@ static int at803x_config_intr(struct phy
  30                 value |= AT803X_INTR_ENABLE_DUPLEX_CHANGED;
  31                 value |= AT803X_INTR_ENABLE_LINK_FAIL;
  32                 value |= AT803X_INTR_ENABLE_LINK_SUCCESS;
  33 -               if (priv->is_fiber) {
  34 -                       value |= AT803X_INTR_ENABLE_LINK_FAIL_BX;
  35 -                       value |= AT803X_INTR_ENABLE_LINK_SUCCESS_BX;
  36 -               }
  37
  38                 err = phy_write(phydev, AT803X_INTR_ENABLE, value);
  39         } else {
  40 @@ -1617,6 +1612,29 @@ static int at8031_set_wol(struct phy_dev
  41         return ret;
  42  }
  43
  44 +static int at8031_config_intr(struct phy_device *phydev)
  45 +{
  46 +       struct at803x_priv *priv = phydev->priv;
  47 +       int err, value = 0;
  48 +
  49 +       if (phydev->interrupts == PHY_INTERRUPT_ENABLED &&
  50 +           priv->is_fiber) {
  51 +               /* Clear any pending interrupts */
  52 +               err = at803x_ack_interrupt(phydev);
  53 +               if (err)
  54 +                       return err;
  55 +
  56 +               value |= AT803X_INTR_ENABLE_LINK_FAIL_BX;
  57 +               value |= AT803X_INTR_ENABLE_LINK_SUCCESS_BX;
  58 +
  59 +               err = phy_set_bits(phydev, AT803X_INTR_ENABLE, value);
  60 +               if (err)
  61 +                       return err;
  62 +       }
  63 +
  64 +       return at803x_config_intr(phydev);
  65 +}
  66 +
  67  static int qca83xx_config_init(struct phy_device *phydev)
  68  {
  69         u8 switch_revision;
  70 @@ -2137,7 +2155,7 @@ static struct phy_driver at803x_driver[]
  71         .write_page             = at803x_write_page,
  72         .get_features           = at803x_get_features,
  73         .read_status            = at803x_read_status,
  74 -       .config_intr            = at803x_config_intr,
  75 +       .config_intr            = at8031_config_intr,
  76         .handle_interrupt       = at803x_handle_interrupt,
  77         .get_tunable            = at803x_get_tunable,
  78         .set_tunable            = at803x_set_tunable,