git.openwrt.org Git - openwrt/staging/neocturne.git/blob

   1 From 08c5904ad00ffc54d37058ead19814f8a85f6f39 Mon Sep 17 00:00:00 2001
   2 From: Dave Stevenson <dave.stevenson@raspberrypi.com>
   3 Date: Mon, 27 Nov 2023 14:50:58 +0000
   4 Subject: [PATCH] dtoverlays: Add option for cam0 to camera-mux-Nport overlays
   5
   6 Seeing as the mux can be connected to either CAM/DISP1 or
   7 CAM/DISP0 on a Pi5, add a cam0 override to allow configuration
   8 of which is used. Default (as with all camera overlays) is CAM/DISP1.
   9
  10 The overlay does NOT update the camera regulator used by all the
  11 sensors as doing so would be a nightmare. The Arducam mulitplexer
  12 boards these overlays are initially supporting seem to tie the
  13 regulator GPIO for all the sensors high anyway.
  14 If it was viewed as necessary, then creating an additional
  15 regulator that listed cam[01]_reg as the parent should work.
  16
  17 Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
  18 ---
  19  arch/arm/boot/dts/overlays/README                       | 4 ++++
  20  arch/arm/boot/dts/overlays/camera-mux-2port-overlay.dts | 7 +++++--
  21  arch/arm/boot/dts/overlays/camera-mux-4port-overlay.dts | 7 +++++--
  22  3 files changed, 14 insertions(+), 4 deletions(-)
  23
  24 --- a/arch/arm/boot/dts/overlays/README
  25 +++ b/arch/arm/boot/dts/overlays/README
  26 @@ -823,6 +823,8 @@ Params: cam0-arducam-64mp       Select A
  27          cam1-ov9281             Select OV9281 for camera on port 1
  28          cam1-imx290-clk-freq    Set clock frequency for an IMX290 on port 1
  29
  30 +        cam0                    Connect the mux to CAM0 port (default is CAM1)
  31 +
  32
  33  Name:   camera-mux-4port
  34  Info:   Configures a 4 port camera multiplexer
  35 @@ -878,6 +880,8 @@ Params: cam0-arducam-64mp       Select A
  36          cam3-ov9281             Select OV9281 for camera on port 3
  37          cam3-imx290-clk-freq    Set clock frequency for an IMX290 on port 3
  38
  39 +        cam0                    Connect the mux to CAM0 port (default is CAM1)
  40 +
  41
  42  Name:   cap1106
  43  Info:   Enables the ability to use the cap1106 touch sensor as a keyboard
  44 --- a/arch/arm/boot/dts/overlays/camera-mux-2port-overlay.dts
  45 +++ b/arch/arm/boot/dts/overlays/camera-mux-2port-overlay.dts
  46 @@ -77,7 +77,7 @@
  47         };
  48
  49         /* Mux define */
  50 -       fragment@200 {
  51 +       i2c_frag: fragment@200 {
  52                 target = <&i2c_csi_dsi>;
  53                 __overlay__ {
  54                         #address-cells = <1>;
  55 @@ -294,7 +294,7 @@
  56                 };
  57         };
  58
  59 -       fragment@201 {
  60 +       csi_frag: fragment@201 {
  61                 target = <&csi1>;
  62                 __overlay__ {
  63                         status = "okay";
  64 @@ -501,5 +501,8 @@
  65                                        <&imx290_0>,"clock-frequency:0";
  66                 cam1-imx290-clk-freq = <&clk_imx290>,"clock-frequency:0",
  67                                        <&imx290_1>,"clock-frequency:0";
  68 +
  69 +               cam0 = <&i2c_frag>, "target:0=",<&i2c_csi_dsi0>,
  70 +                      <&csi_frag>, "target:0=",<&csi0>;
  71         };
  72  };
  73 --- a/arch/arm/boot/dts/overlays/camera-mux-4port-overlay.dts
  74 +++ b/arch/arm/boot/dts/overlays/camera-mux-4port-overlay.dts
  75 @@ -135,7 +135,7 @@
  76         };
  77
  78         /* Mux define */
  79 -       fragment@200 {
  80 +       i2c_frag: fragment@200 {
  81                 target = <&i2c_csi_dsi>;
  82                 __overlay__ {
  83                         #address-cells = <1>;
  84 @@ -552,7 +552,7 @@
  85                 };
  86         };
  87
  88 -       fragment@201 {
  89 +       csi_frag: fragment@201 {
  90                 target = <&csi1>;
  91                 __overlay__ {
  92                         status = "okay";
  93 @@ -872,5 +872,8 @@
  94                                        <&imx290_2>,"clock-frequency:0";
  95                 cam3-imx290-clk-freq = <&clk_imx290>,"clock-frequency:0",
  96                                        <&imx290_3>,"clock-frequency:0";
  97 +
  98 +               cam0 = <&i2c_frag>, "target:0=",<&i2c_csi_dsi0>,
  99 +                      <&csi_frag>, "target:0=",<&csi0>;
 100         };
 101  };